Pseudo-Medical Monitor Code

Being written on the fly, expect rewrites and restructures. Enough information is here for writing code on the completed hardware.

Basic Software Load for Main Device Only. Later Update to Incorporate Port Usage with External Units.

Hardware Libraries

 #include <Wire.h>
 #include <SPI.h>
 #include <Adafruit_GFX.h>
 #include <Adafruit_ST7735.h>
 #include <Adafruit_VL53L0X.h>
 #include <Adafruit_AMG88xx.h>
 #include <MAX30105.h>
 #include <SparkFunMLX90614.h> 
 #include <DFRobot_ID809.h>
 #include <SD.h>
 #include <pu2clr_pcf8574.h>
 #include <TCA9548A.h>
 

Library Modification

// In this Library : #include <SparkFunMLX90614.h> 
//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.
//
//  I2C processing change needed for Arduino Due implementation
//
// Comment Out Line Below
//	_i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true); 

// Add Line Below
      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);

Defines - Variables - Routines

The following code is a mixing and matching of the example code provided by the referenced Special Libraries.

Custom Includes

#include "I2CMUX_Stuff.h"

#include "TFT_Stuff.h"

#include "SD_Stuff.h"

#include "HeartBeat_Stuff.h"

Two related include files from Library for MAX30105 examples not included here

• bmpHeader.h
• Interoplation.

#include "ThermalImager_Stuff.h"

#include "TOFLaser_Stuff.h"

#include "NonContactThermometer_Stuff.h"

#include "FingerPrint_Stuff.h"

#include "ControlPanel_Stuff.h"

#include "AudioBoard_Stuff.h"

#include "I2CMUX_Stuff.h"
#include "TFT_Stuff.h"
#include "SD_Stuff.h"

#include "HeartBeat_Stuff.h"
#include "ThermalImager_Stuff.h"
#include "TOFLaser_Stuff.h"
#include "NonContactThermometer_Stuff.h"
#include "FingerPrint_Stuff.h"

#include "ControlPanel_Stuff.h"
#include "AudioBoard_Stuff.h"

void setup()
{
  Wire.begin();
  Wire1.begin();
  Serial.begin(115200);

  analogReadResolution(12);
  
  Serial.println("SETUP - Begin");
  Serial.println("TFT");
  setup_TFT();
  Serial.println("SD Card");
  setup_SD();

  Serial.println("CT");
  setup_NonContactThermometer();
  Serial.println("ThermalImager");
  setup_ThermalImager();
  Serial.println("TOFLaser");
  setup_TOFLaser();  
  Serial.println("HeartBeat");
  setup_HeartBeat();
  Serial.println("FingerPrint");
  setup_FingerPrint();
  Serial.println("ControlPanel");
  setup_ControlPanel();
  Serial.println("AudioBoard");
  setup_AudioBoard();
  Serial.println("SETUP - End");
}


void loop()
{
      TOFLaser_Frame();
      ThermalImager_Frame();
      NonContactThermometer_Frame();
      FingerPrint_Frame();
      HeartBeat_Frame();
}

 

Pseudo-Medical Monitor