Equipment Overview

Owner/Loaner: LVL1
Serial Number: Serial Number
Make/Model: ShopBot PR Standard 48x96
Arrival Date: 12/3/2015
Usability: Yes
Contact: Jeff McCord
Where: Woodshop

Required Certification

Note: This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders. Do not hack this machine.

Potential users are required to obtain certification and demonstrate proficiency to the community in order to operate this machine.

Our current LVL1 ShopBot User Community (using StarWars parlance) as of 20250824
- Jedi Masters (Yoda-Level Certification Trainers) Jeff McCord, Brandon Johnson
- Jedi Knights (Certified Users) Christopher Dehner, Jim Dallam
- Padawans (Individuals in Training) Kevin Price, Cody Kreisl, James McClain
- Legacy Jedi Masters (off-site, not active) Daniel Johnsen, Micah "Meesh" Burkhardt, Brian Wagner

Preparation is the name of the ShopBot game. The VCarve Checklist and ShopBot Pre-Job Tasklist will serve as basic starting points for any job.

For more information, see the links below. If you need to be certified to use the ShopBot, see Certification above.

X and Y limit switches for the shopbot are

Y Limit Switch replaced 5/7/19 by B Wagner
- Sensor purchased on ebay for about $50