12/19/2023
Revision as of 19:04, 19 December 2023 by Keviceaia (talk | contribs) (Created page with "__NOTOC__ 300px|thumb|right = Welcome = <big>'''Welcome to LVL1!'''</big> = Parking = * Scan the QR code on the table by the door and enter your li...")
Welcome
Welcome to LVL1!
Parking
- Scan the QR code on the table by the door and enter your license plate numbers to keep from getting a ticket. This is for everyone who uses the space.
- This applies 24/7, and must be done each time you visit, every six hours.
Shoutouts
People getting caught being awesome and doing things for the space.
- Everyone - being here!
- J. McCord - Laser workshop!
- Gary - Crushing it! (and by "it", all the cans.)
- Patrick - Cleaning all the metal shop things
Announcements
- T-Shirts are on sale after the meeting!!!!
- 8$ for a large! That's the only size we have!
- See Tiffany
- If you're another size, we have a sewing area!
- Nominations for Officers & Directors
- You may nominate anyone who has been a member in good standing for at least 6 months, including yourself!
- (if you have been a member in good standing for 6 months)
- Nominations may be made and accepted on the Members' List
- See our Bylaws (sections 7.5 and 8.2) for a description of each position
- Nominations will close on Jan. 9, which is one week before our annual meeting
- Votes may be cast by e-mail after nominations close until 24 hours before the annual meeting, or in person at the annual meeting on Jan. 16.
- You may nominate anyone who has been a member in good standing for at least 6 months, including yourself!
The Tim VanSant Makership: LVL1's Makership Program
- This program is funded completely through donations and NOT through our membership dues.
- We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
- Apply at https://lvl1.org/makership/ and apply via makership@lvl1.org
- Application deadline is the last day of each month @ 11:59 PM.
- Become a regular member of LVL1.
- Get 3 months of membership and up to $100 of project cost reimbursements!
- If you are a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
- Members: please talk up the Makership to potential new members.
- If your application is not approved, PLEASE revise and resubmit next month.
- Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!
Broken/Equipment Report
Please make sure that you review the instructions and manual and ask for the training prior to using the equipment.
- If something is broken or needs to be replaced, please send an email to broken@lvl1.org.
- Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!
- Table saw - work continues
Member Responsibilities
- Please make sure guests sign the waiver and validate their parking.
- Member hosts are empowered to ask visitors who do not conduct themselves according to LVL1's policies and community standards to leave.
- Members are responsible for their guests and any other non-members they host. This includes hosting an event.
- Do not block access to storage or exits
- Turn things off and lock the space when you leave
- If your project doesn't fit on your shelf, please take it offsite. The boneyard is not your own personal storage shed.
- READ the Members' List. This is how we alert you to important safety and policy things happening at the space.
- Questions? Please contact a board member or the Members' List.
Everybody's Responsibilities
- If something is broken or needs to be restocked, email broken@lvl1.org
- Always leave equipment at least as good as you found it.
- Do not leave equipment running unattended.
- Clean up your mess and keep the space usable for your fellow hackers!
- Do not take the furniture outside!
- Get a FREE Clorox Wipe! Clean all the surfaces!
- There is a list of 5 minute tasks on the whiteboard.
- Do NOT cause odors in the space
- Be Excellent to our neighbors that share the building with us, and DO NOT work on projects that will disrupt parts of the building that aren't ours.
- If you see anyone being unexcellent to fellow hackers or our neighbors, please courteously remind them!
First Time Visitor Info
Are there any 1st time Visitors?
- Prime Directive: Be Excellent to Each other
- Being unsafe is being unexcellent!
- Please sign the waiver! We have dangerous tools that can cause serious injury if not used correctly and carefully. We're not responsible if you hurt yourself with them!
- Minors must be supervised at all times.
- Animals also must be supervised at all times.
- Means of communication - https://www.lvl1.org/connect/
- Our website / calendar is https://lvl1.org
- Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
- Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
- Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
- Discord https://discord.gg/qXFrrNvxUY
- Facebook, Twitter, Meetup
- learn@lvl1.org - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
- broken@lvl1.org - Something broken? Does something need to be restocked?
- directors@lvl1.org - Need to contact those who are ostensibly "in charge"?
- Adam will be hosting a tour at the end of the meeting, near the front doors.
Regular Weekly Meetups
You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!
Monday
Tuesday
- LVL1 Open Meeting, 8:00pm - where you are right now!
- Directors Meeting, December 19, 9:00pm - In the classroom and open to the public following the regular weekly meeting, come see how the sausage is made, the 3rd Tuesday of each month.
Wednesday
Thursday
- Derby City Py, December 28 (?), 6:30pm - Meet and discuss all things Python the 4th Thursday of each month.
Friday
- Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
- Last Friday:
- All The Hobbitses
- Two of the Rush Hourses
- This Friday:
- ???
- Last Friday:
Saturday
Sunday
Upcoming Events
You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/
- December 16 2:00 pm to 4:00 pm - 1000's way to print a coffee cup - an open scad tutorial hosted by Dargh (the Klingon Tim)
- December 22-23 7:00 pm to 7:00 pm - Dollar Christmas Tree Hackathon
- December 23 7:00 pm to whenever - Lvl1 Holiday Party
WATCHA MAKING?
Making something cool?
Need help or materials for a project?
Have materials looking for a project?
Tell us about it!
