Veruca Gloop

From LVL1

Revision as of 11:38, 30 October 2010 by Imrcly (talk | contribs) (Created page with '__NOTOC__ Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 == Specifications == * ''Usable Build Area:'' 100mm Width x 100mm Depth x 130mm Height * …')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010

Specifications

Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
X/Y Positioning Resolution: 0.085mm
Z Positioning Resolution: 3.125 microns
Maximum X/Y Feedrate: 5000mm/minute
Maximum Z Feedrate: 200mm/minute
Typical Z-layer height: 0.3725mm
Outside measurements: 350mm x 240mm x 450mm

Modifications

Z axis crank http://www.thingiverse.com/thing:975
Y axis belt tensioner http://www.thingiverse.com/thing:1618
Z axis wobble arrestors

Working on it

'Z axis wobble'
- http://www.thingiverse.com/thing:2151
- ordered guide rods need to print more wobble arrestors and guides

Known Problems

extruder motor seized Fixed with http://wiki.makerbot.com/the-great-motor-mystery
Power supply died replaced with RMA

Future Ideas

'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication

Retrieved from "http://wiki.lvl1.org/index.php?title=Veruca_Gloop&oldid=1140"