APS GF-B Reflow Oven: Difference between revisions

From LVL1
Jump to navigation Jump to search
Newer edit →
Nrarmen (talk | contribs)
1,468 edits
Created page with "{{Template:Equipment |owner=LVL1 |serial=Serial Number |model=GF-B |arrived=04/22/2016 |doesitwork=Yes |contact=Nathan A. |where=Electronics Workbench |picture=wiki URL }}"
 
Nrarmen (talk | contribs)
1,468 edits
No edit summary
Line 9: Line 9:
|picture=wiki URL
|picture=wiki URL
}}
}}
= Quick Start Instructions =
* Turn oven switch on (rotate clockwise)
* Turn on oven rocker fan switch
* Press Enter key
* Use arrow keys to navigate to "Work" and press Enter
* Slide conveyor over to one side completely (do not have loaded with PCBs), oven will start
* Let oven heat up to profile's reflow temperature (e.g. 235C), about 30-35 minutes
* Load PCBs on side not inside the oven
* Slide conveyor to other side. PCBs will now be inside the oven.
* Wait for timer to complete its cycle, ~240 seconds or whatever your current profile is set to
* Once cycle is complete, slide the conveyor over again and let boards cool
** Note: if you slide conveyor completely over to one side, the oven will automatically start another cycle. To avoid this, slide oven conveyor to the side partially.
= Manual =
Insert link or pictures here

Revision as of 21:08, 26 April 2016

Back to list of Equipment

APS_GF-B_Reflow_Oven&.png

Equipment Overview

  • Owner/Loaner: LVL1
  • Serial Number: Serial Number
  • Make/Model: GF-B
  • Arrival Date: 04/22/2016
  • Usability: Yes
  • Contact: Nathan A.
  • Where: Electronics Workbench
File:Wiki URL


Quick Start Instructions

  • Turn oven switch on (rotate clockwise)
  • Turn on oven rocker fan switch
  • Press Enter key
  • Use arrow keys to navigate to "Work" and press Enter
  • Slide conveyor over to one side completely (do not have loaded with PCBs), oven will start
  • Let oven heat up to profile's reflow temperature (e.g. 235C), about 30-35 minutes
  • Load PCBs on side not inside the oven
  • Slide conveyor to other side. PCBs will now be inside the oven.
  • Wait for timer to complete its cycle, ~240 seconds or whatever your current profile is set to
  • Once cycle is complete, slide the conveyor over again and let boards cool
    • Note: if you slide conveyor completely over to one side, the oven will automatically start another cycle. To avoid this, slide oven conveyor to the side partially.

Manual

Insert link or pictures here

Retrieved from "http://wiki.lvl1.org/index.php?title=APS_GF-B_Reflow_Oven&oldid=9330"