Equipment Overview

Owner/Loaner: LVL1
Serial Number: Serial Number
Make/Model: GF-B
Arrival Date: 04/22/2016
Usability: Overshoots temperature somewhat inconsistently, but still usable if high precision isn't necessary
Contact: Nathan A.
Where: Classroom (Can be plugged in at the table with the embroidery machine)

Quick Start Instructions

Turn oven switch on (rotate clockwise)
Turn on oven rocker fan switch
Press Enter key
Use arrow keys to navigate to "Work" and press Enter
Slide conveyor over to one side completely (do not have loaded with PCBs), oven will start
Let oven heat up to profile's reflow temperature (e.g. 235C), about 30-35 minutes
Load PCBs on side not inside the oven
Slide conveyor to other side. PCBs will now be inside the oven.
Wait for timer to complete its cycle, ~240 seconds or whatever your current profile is set to
Once cycle is complete, slide the conveyor over again and let boards cool
- Note: if you slide conveyor completely over to one side, the oven will automatically start another cycle. To avoid this, slide oven conveyor to the side partially.

Insert link or pictures here