Difference between revisions of "Network"

From LVL1
Jump to navigation Jump to search
Line 3: Line 3:
 
== HELP NO INTERWEBS!! ==
 
== HELP NO INTERWEBS!! ==
  
* If power is tripped on the western wall, the UPS needs to be manually turned back on to provide power to our wireless uplink. (Note: this is no longer on the UPS)
+
* If power is tripped to the basement turn that back on.
 
* The point-to-point wireless link from LVL1's roof transceiver to bluegrass.net's AP may need to be reset. Behind the server rack is a Power over Ethernet device that provides power to the antenna link. Unplug it and plug it back in to power cycle it.
 
* The point-to-point wireless link from LVL1's roof transceiver to bluegrass.net's AP may need to be reset. Behind the server rack is a Power over Ethernet device that provides power to the antenna link. Unplug it and plug it back in to power cycle it.
* The ethernet uplink to bluegrass.net goes directly into our pfsense box router/firewall. Have you tried power cycling this? Try pinging the bluegrass.net gateway directly from this server. If it pings, the internal network is down.
+
* There's a Cisco switch with VLAN configurations to the upstairs WiFi routers. I guess you could try power cycling that if you want. That's probably not it though.
 
* You can get to the web management interface of pfsense. Use 'https' not 'http' with the internal LAN interface. Poke around if you must, but I doubt any settings are preventing access unless you changed them. IF YOU CHANGE SOMETHING, LET EVERYONE ELSE KNOW. Seriously, if you don't know what you're doing you should probably not mess with config changes.  
 
* You can get to the web management interface of pfsense. Use 'https' not 'http' with the internal LAN interface. Poke around if you must, but I doubt any settings are preventing access unless you changed them. IF YOU CHANGE SOMETHING, LET EVERYONE ELSE KNOW. Seriously, if you don't know what you're doing you should probably not mess with config changes.  
* There's a Cisco switch with VLAN configurations to the upstairs WiFi routers. I guess you could try power cycling that if you want. That's probably not it though.
+
* The ethernet uplink to bluegrass.net goes into the switch which is vlanned off to separate raw internet from nated network. you can restart this also.
 
* There are two WiFi routers (for lvl1 and lvl1secure) next the printer. You could try power cycling those.
 
* There are two WiFi routers (for lvl1 and lvl1secure) next the printer. You could try power cycling those.
  

Revision as of 14:40, 20 July 2011


Lvl1 qr header.png
Network&.png
Network

HELP NO INTERWEBS!!

  • If power is tripped to the basement turn that back on.
  • The point-to-point wireless link from LVL1's roof transceiver to bluegrass.net's AP may need to be reset. Behind the server rack is a Power over Ethernet device that provides power to the antenna link. Unplug it and plug it back in to power cycle it.
  • There's a Cisco switch with VLAN configurations to the upstairs WiFi routers. I guess you could try power cycling that if you want. That's probably not it though.
  • You can get to the web management interface of pfsense. Use 'https' not 'http' with the internal LAN interface. Poke around if you must, but I doubt any settings are preventing access unless you changed them. IF YOU CHANGE SOMETHING, LET EVERYONE ELSE KNOW. Seriously, if you don't know what you're doing you should probably not mess with config changes.
  • The ethernet uplink to bluegrass.net goes into the switch which is vlanned off to separate raw internet from nated network. you can restart this also.
  • There are two WiFi routers (for lvl1 and lvl1secure) next the printer. You could try power cycling those.

Misc

How to Open the Door: Lift cover on key lock, press key lock and then turn the handle.

Internet Service graciously provided by http://bluegrass.net

Internet IPs

  • 69.64.6.64/29 (LVL1 IPs)
  • 69.64.6.65 (bluegrass.net gateway)
  • 216.135.64.2 (bluegrass.net DNS 1)
  • 216.135.64.3 (bluegrass.net DNS 2)

Network IPs

  • 69.64.6.70 (pfSense FW external)
  • 10.0.0.1 (pfSense FW internal)
  • 10.0.0.240 (Belkin)
  • 10.0.0.252 HP 2600n Color LaserJet

Back to Space