Pseudo-Medical Monitor Code

Special Libraries

#include <Adafruit_GFX.h>
#include <Adafruit_ST7735.h>
#include <Adafruit_VL53L0X.h>
#include <Adafruit_AMG88xx.h>
#include <MAX30105.h>
#include <SparkFunMLX90614.h> 
#include <DFRobot_ID809.h>
#include <SD.h>
#include <Adafruit_MPU6050.h>
#include <pu2clr_pcf8574.h>
#include <TCA9548A.h>

Library Modification

// In this Library : #include <SparkFunMLX90614.h> 
//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.
//
//  I2C processing change needed for Arduino Due implementation
//
// Comment Out Line Below
//	_i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true); 

// Add Line Below
      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);

Defines - Variables - Routines

Updates Needed

The following code is a mixing and matching of the example code provided by the referenced Special Libraries.

Includes

#include <Wire.h>
#include <SPI.h>

#include <Adafruit_GFX.h>    
#include <Adafruit_ST7735.h> 
#include "Adafruit_VL53L0X.h"
#include <Adafruit_AMG88xx.h>
#include <MAX30105.h>
#include <SparkFunMLX90614.h> 
#include <DFRobot_ID809.h>
#include "bmpHeader.h"
#include <SD.h>

#include "TFT_Stuff.h"

#include "HB_Stuff.h"
#include "AMG_Stuff.h"
#include "VL_Stuff.h"
#include "CT_Stuff.h"
#include "FP_Stuff.h"
#include "EXG_Stuff.h"

 

VL53L0X Sensor (VL_Stuff.h)

#define START_DISTANCE 500
#define EXG_DISTANCE 150

Adafruit_VL53L0X lox = Adafruit_VL53L0X();

bool EXG_Mode = false;

int last_range_measurement = -1;
int VL_x_offset = 118;
int VL_y_offset = 0;
int VL_x_width = 10;
int VL_y_height = 74;

void setup_VL()
{
  lox.begin();
}

void VL_Reset()
{
  last_range_measurement = -1;
}

void range_display(int range_measurement)
{
  int box_top = VL_y_offset;
  int box_bottom = box_top + VL_y_height;
  
  int box_left = VL_x_offset;
  int box_right = box_left + VL_x_width;
  
  int box_width = VL_x_width;
  int box_height = VL_y_height;
  
  int bar_top = box_top + 1;
  int bar_bottom = box_bottom - 1;

  int bar_left = box_left + 1;
  int bar_right = box_right -1;

  int bar_width = VL_x_width - 2;
  int bar_height = VL_y_height - 2;

  int bar_measure;
  
  if (last_range_measurement == -1)
    {
       // Draw Box
       tft.fillRect(box_left, box_top, box_width, box_height, ST7735_BLACK);     
       tft.drawRect(box_left, box_top, box_width, box_height, ST7735_YELLOW);     
    }
  
  if (last_range_measurement != range_measurement)
    {
      tft.fillRect(bar_left, bar_top, bar_width, bar_height, ST7735_BLACK);
      if (range_measurement > START_DISTANCE)
        tft.fillRect(bar_left, bar_top, bar_width, bar_height, ST7735_RED);
       else
        {
          if (range_measurement < EXG_DISTANCE)
            {
              bar_measure = ((float)range_measurement / (float)START_DISTANCE) * bar_height;
              tft.fillRect(bar_left, bar_bottom - bar_measure, bar_width, bar_measure, ST7735_BLUE);              
            }
           else
            { 
              bar_measure = ((float)range_measurement / (float)START_DISTANCE) * bar_height;
              tft.fillRect(bar_left, bar_bottom - bar_measure, bar_width, bar_measure, ST7735_GREEN);
            }
        }
    }  

  last_range_measurement = range_measurement;
}

int VL_Reading()
{
  int range_measure;
  
  VL53L0X_RangingMeasurementData_t measure;
  lox.rangingTest(&measure, false); // pass in 'true' to get debug data printout!
  if (measure.RangeStatus != 4) 
    {  // phase failures have incorrect data          
      range_measure = measure.RangeMilliMeter;
    }
   else 
    {
      range_measure = 9999;
    }

  if (range_measure < EXG_DISTANCE)
    EXG_Mode = true;
   else
    EXG_Mode = false;

  return(range_measure);  
}

void VL_Frame()
{
  int range_measure;
  
  range_measure = VL_Reading();
  
  range_display(range_measure);  

//  delay(100);  
}

Heart Beat Sensor (HB_Stuff.h)

static const unsigned char PROGMEM still_heart_logo_bmp[] =
{ 
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x0F, 0x00, 0x00, 0x67, 0x18, 0xC0, 0x00, 0xC1, 0xB0, 0x60,
0x01, 0x80, 0xE0, 0x20, 0x01, 0x00, 0xC0, 0x30, 0x01, 0x00, 0x40, 0x10, 0x01, 0x00, 0x40, 0x10, 
0x01, 0x04, 0x00, 0x10, 0x01, 0x04, 0x00, 0x10, 0x01, 0x0C, 0x00, 0x30, 0x00, 0x88, 0x80, 0x20, 
0x00, 0x8B, 0x80, 0x40, 0x0F, 0xF3, 0x70, 0x80, 0x00, 0x13, 0x01, 0x80, 0x00, 0x19, 0x03, 0x00, 
0x00, 0x0C, 0x06, 0x00, 0x00, 0x06, 0x0C, 0x00, 0x00, 0x03, 0x18, 0x00, 0x00, 0x01, 0xB0, 0x00, 
0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

static const unsigned char PROGMEM beat_heart_logo_bmp[] =
{ 
0x01, 0xF0, 0x0F, 0x80, 0x06, 0x1C, 0x38, 0x60, 0x18, 0x06, 0x60, 0x18, 0x10, 0x01, 0x80, 0x08, 
0x20, 0x01, 0x80, 0x04, 0x40, 0x00, 0x00, 0x02, 0x40, 0x00, 0x00, 0x02, 0xC0, 0x00, 0x08, 0x03,
0x80, 0x00, 0x08, 0x01, 0x80, 0x00, 0x18, 0x01, 0x80, 0x00, 0x1C, 0x01, 0x80, 0x00, 0x14, 0x00,
0x80, 0x00, 0x14, 0x00, 0x80, 0x00, 0x14, 0x00, 0x40, 0x10, 0x12, 0x00, 0x40, 0x10, 0x12, 0x00,
0x7E, 0x1F, 0x23, 0xFE, 0x03, 0x31, 0xA0, 0x04, 0x01, 0xA0, 0xA0, 0x0C, 0x00, 0xA0, 0xA0, 0x08,
0x00, 0x60, 0xE0, 0x10, 0x00, 0x20, 0x60, 0x20, 0x06, 0x00, 0x40, 0x60, 0x03, 0x00, 0x40, 0xC0,
0x01, 0x80, 0x01, 0x80, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x60, 0x06, 0x00, 0x00, 0x30, 0x0C, 0x00,
0x00, 0x08, 0x10, 0x00, 0x00, 0x06, 0x60, 0x00, 0x00, 0x03, 0xC0, 0x00, 0x00, 0x01, 0x80, 0x00  
};

MAX30105 particleSensor;

#define HB_INT 4

int HB_x_offset = 0;
int HB_y_offset = 78;
int HB_x_width = 46;
int HB_y_height = 82;

int HB_initialize_screen = -1;

void HB_Reset()
{
  HB_initialize_screen = -1;  
}

void setup_HB()
{
  // Initialize sensor
  if (!particleSensor.begin()) //Use default I2C port, 400kHz speed
  {
    Serial.println("MAX30105 was not found. Please check wiring/power. ");
    while (1);
  }
//  Serial.println("Place your index finger on the sensor with steady pressure.");

  particleSensor.setup(); //Configure sensor with default settings
  particleSensor.setPulseAmplitudeRed(0x0A); //Turn Red LED to low to indicate sensor is running
  particleSensor.setPulseAmplitudeGreen(0); //Turn off Green LED

}


void HB_Frame()
{
  int box_top = HB_y_offset;
  int box_bottom = box_top + HB_y_height;
  
  int box_left = HB_x_offset;
  int box_right = box_left + HB_x_width;
  
  int box_width = HB_x_width;
  int box_height = HB_y_height;

  const byte RATE_SIZE = 6; //Increase this for more averaging. 4 is good.
  byte rates[RATE_SIZE]; //Array of heart rates
  long pulse_ir[RATE_SIZE];
  long pulse_red[RATE_SIZE];
  
  byte rateSpot = 0;
  byte O2Spot = 0;
  long O2AVG = 0;
  long lastBeat = 0; //Time at which the last beat occurred
  float beatsPerMinute;
  int beatAvg = -1, lastAvg = 0;
  long irAVG = 0;
  long redAVG = 0;

  bool beatDetect = false;
  int latentBeatMax = 2;
  int latentBeat = 0;

  long irValue = 0;
  long redValue = 0;
  long maxValue = 0;   
  long lastValue = 0;
  long turnValue = 0;
  long lastMax = 0;

  int tft_HB_Screen = 0;
  int last_HB_Screen = -1;
  
  unsigned long start_time;
  unsigned long delta = 0;
  int HB_detect_threshold = 7000;

  // Clear rate calculating array
  for(byte x = 0; x < RATE_SIZE ; ++x)
    rates[x] = 0;

  if (HB_initialize_screen == -1)
    {
      tft.fillRect(box_left, box_top, box_width, box_height, ST7735_BLACK);
      tft.drawRect(box_left, box_top, box_width, box_height, ST7735_BLUE);
      tft.setTextColor(ST7735_WHITE, ST7735_BLACK);             
      tft.setCursor(box_left + 3,box_top + 4);                
      tft.println("Place "); 
      tft.setCursor(box_left + 3,box_top + 16);
      tft.println("your ");            
      tft.setCursor(box_left + 3,box_top + 28);
      tft.println("finger ");            
      tft.setCursor(box_left + 3,box_top + 40);
      tft.println("on ");                        
      tft.setCursor(box_left + 3,box_top + 52);
      tft.println("sensor ");                                    
      HB_initialize_screen = 0;
      for (byte x = 0 ; x < RATE_SIZE ; x++)
        rates[x] = 0;
    }

  irValue = particleSensor.getIR();
  redValue = particleSensor.getRed();
  
  while(irValue > HB_detect_threshold)
    {
      irValue = particleSensor.getIR();    //Reading the IR value it will permit us to know if there's a finger on the sensor or not
      redValue = particleSensor.getRed();
      
//      Serial.print(irValue);
//      Serial.print(",");
//      Serial.print(redValue);
//      Serial.print(",");
//      Serial.print(maxValue);
//      Serial.print(",");
//      Serial.print(turnValue);
//      Serial.print(",");
//      Serial.print(lastMax);
      Serial.println();
           
      if (irValue > 7000)
        {  
          //finger is detected
          tft_HB_Screen = 1;
          if (irValue > maxValue)
            maxValue = irValue;

//        if ((irValue < maxValue - 200) && (irValue > lastValue + 20)) // alternate detect beat method
          if (irValue < maxValue - 200)
            {
              beatDetect = true;
              lastMax = maxValue;
              maxValue = irValue;
              turnValue = lastValue;
              latentBeat = latentBeatMax;
            }

          lastValue = irValue;   
          
          if (beatDetect == true)
            {
              beatDetect = false;

              //We sensed a beat!
              delta = millis() - lastBeat;                   //Measure duration between two beats
              lastBeat = millis();

              beatsPerMinute = 60 / (delta / 1000.0);           //Calculating the BPM
              lastAvg = beatAvg;             

              pulse_ir[O2Spot++] = irValue;
              pulse_red[O2Spot] = redValue;
/*              
              if (O2Spot == RATE_SIZE)
                {
                  for (byte x = 0; x < RATE_SIZE; ++x)
                    {
                      irAVG = irAVG + pulse_ir[x];
                      redAVG = redAVG + pulse_red[x];
                    }
                  O2AVG = ((float)irAVG / (float) redAVG) * 100;
                  tft.setCursor(box_left + 4,box_top + 56);                
                  tft.println(O2AVG);                         
                  O2Spot = 0;
                }
*/              
              if ((beatsPerMinute < 255.0) && (beatsPerMinute > 20.0))               //To calculate the average we strore some values (4) then do some math to calculate the average
                {
                  rates[rateSpot++] = (byte)beatsPerMinute; //Store this reading in the array
                  rateSpot %= RATE_SIZE; //Wrap variable

                  //Take average of readings

                  beatAvg = 0;
                  for (byte x = 0 ; x < RATE_SIZE ; x++)
                    beatAvg += rates[x];
                  beatAvg /= RATE_SIZE;
                } 
            }
        }


      if (irValue < 7000)
        {       //If no finger is detected it inform the user and put the average BPM to 0 or it will be stored for the next measure
          tft_HB_Screen = 0;
          beatAvg=0;
          lastAvg = 0;
          for(byte x = 0; x < RATE_SIZE ; ++x)
            rates[x] = 0;
        }
     
      switch(tft_HB_Screen)
        {
          case 0:            
            if (last_HB_Screen != 0)
              tft.fillRect(box_left + 1, box_top + 1, box_width - 2, box_height - 2, ST7735_BLACK);              
            tft.setTextColor(ST7735_WHITE, ST7735_BLACK);             
            tft.setCursor(box_left + 3,box_top + 4);                
            tft.println("Place "); 
            tft.setCursor(box_left + 3,box_top + 16);
            tft.println("your ");            
            tft.setCursor(box_left + 3,box_top + 28);
            tft.println("finger ");            
            tft.setCursor(box_left + 3,box_top + 40);
            tft.println("on ");                        
            tft.setCursor(box_left + 3,box_top + 52);
            tft.println("sensor ");                                    
            break;
          case 1:         
            if (last_HB_Screen != 1)
              tft.fillRect(box_left + 1,box_top + 1,32,33,ST7735_BLACK);
            tft.setTextColor(ST7735_WHITE, ST7735_BLACK); 
            if (latentBeat == latentBeatMax)  
              {
                tft.fillRect(box_left + 1,box_top + 1, box_width - 2, 33, ST7735_BLACK);
                tft.drawBitmap(box_left + 2,box_top + 2, beat_heart_logo_bmp, 32, 32, ST7735_RED);    //Draw the second picture (bigger heart)              
              }
            if (latentBeat == 0)
              {
                tft.fillRect(box_left + 1,box_top + 1, box_width - 2, 33, ST7735_BLACK);
                tft.drawBitmap(box_left + 2, box_top + 2, still_heart_logo_bmp, 32, 32, ST7735_WHITE);       //Draw the first bmp picture (little heart)
                latentBeat = -1;
              }                                          
            if (latentBeat > 0)
              -- latentBeat;              
            if (lastAvg != beatAvg)
              {
                tft.fillRect(box_left + 1,box_top + 34 ,box_width - 2,box_height - 35, ST7735_BLACK);
                tft.setCursor(box_left + 4,box_top + 34);                
                tft.println("BPM");             
                tft.setCursor(box_left + 4,box_top + 44);                
                tft.println(beatAvg);           
                lastAvg = beatAvg;
              }
            break;
          case 2:
            tft.fillRect(box_left + 1,box_top + 2, 32, 32, ST7735_BLACK);
            tft.drawBitmap(box_left + 2,box_top + 2, beat_heart_logo_bmp, 32, 32, ST7735_RED);    //Draw the second picture (bigger heart)              

            tft.fillRect(box_left + 1,box_top + 34 ,box_width - 2,box_height - 35, ST7735_BLACK);
            tft.setCursor(box_left + 4,box_top + 34);                
            tft.println("BPM");             
            tft.setCursor(box_left + 4,box_top + 44);                
            tft.println(beatAvg);                       
            break;  
          case 3:
            break;    
        }
     last_HB_Screen = tft_HB_Screen;    
     delay(100); 
    }
}

 

Fingerprint Scanner (FP_Stuff.h)

#define FPSerial Serial1
#define FP_INIT 3

DFRobot_ID809 fingerprint;
String desc;
File myFile;

//#define QUARTER
#ifdef  QUARTER
uint8_t data[6400];   //Quarter image
#else
uint8_t data[25600];  //Full image
#endif

int FP_x_offset = 46;
int FP_y_offset = 78;
int FP_x_width = 82;
int FP_y_height = 82;

bool fingerprint_captured = false;
bool FP_first_pass = true;

void setup_FP()
{
  pinMode(FP_INIT,INPUT);
  /*Init FPSerial*/
  FPSerial.begin(115200);
  /*Take FPSerial as communication port of fingerprint module */
  fingerprint.begin(FPSerial);
  
  /*Wait for Serial to open*/
  /*Test whether device can communicate properly with mainboard 
    Return true or false
    */
  while(fingerprint.isConnected() == false)
  {
    Serial.println("Communication with device failed, please check connection");
    /*Get error code information */
    desc = fingerprint.getErrorDescription();
    Serial.println(desc);
    delay(1000);
  }
}


void FP_Reset()
{
  fingerprint_captured = false;
  FP_first_pass = true;  
}

void FP_Frame()
{
  int box_top = FP_y_offset;
  int box_bottom = box_top + FP_y_height;
  
  int box_left = FP_x_offset;
  int box_right = box_left + FP_x_width;
  
  int box_width = FP_x_width;
  int box_height = FP_y_height;

  int p_x, p_y, p_i, p_data, p_temp;
  
  if (FP_first_pass)
    {
      tft.drawRect(box_left, box_top, box_width, box_height, ST7735_MAGENTA);
      tft.fillRect(box_left + 1, box_top + 1, box_width - 2, box_height - 2, ST7735_BLACK);
      fingerprint.ctrlLED(/*LEDMode = */fingerprint.eBreathing, /*LEDColor = */fingerprint.eLEDRed, /*blinkCount = */0);
      tft.setCursor(box_left + 4, box_top + 4);
      tft.println("Place Finger");
      tft.setCursor(box_left + 4, box_top + 16);
      tft.println("on scanner.");      
      FP_first_pass = false;
    }

  if ((fingerprint.detectFinger()) && (!fingerprint_captured))
    {
      tft.setCursor(box_left + 4, box_top + 4);
      tft.println("Keep Finger ");
      tft.setCursor(box_left + 4, box_top + 16);
      tft.println("on scanner.");      
      
      fingerprint.getFingerImage(data);
      fingerprint.ctrlLED(/*LEDMode = */fingerprint.eKeepsOn, /*LEDColor = */fingerprint.eLEDGreen, /*blinkCount = */0);
      for (p_x=0; p_x < 80; ++p_x)
        for (p_y=0; p_y < 80; ++p_y)
          {
            p_temp = (p_x * 2);
            p_temp = p_temp + (p_y * 160);
            p_data = data[p_temp]/4; // image element

            p_temp = p_temp + 1;
            p_data = p_data + data[p_temp]/4; // image element to the right

            p_temp = (p_x * 2);
            p_temp = p_temp + ((p_y + 1) * 160);
            p_data = p_data + data[p_temp]/4;  // image element below

            p_temp = (p_x + 1) * 2;
            p_temp = p_temp + ((p_y + 1) * 160);
            p_data = p_data + data[p_temp]/4;   // image element to the right, one element down
                 
            p_data = p_data/4;
            tft.drawPixel(box_left+1+p_x,box_top+1+p_y,p_data<<5); 
          }        
    }
    
}

 

MLX90614 Sensor Code (CT_Stuff.h)

IRTherm therm; // Create an IRTherm object to interact with throughout

int last_object_measurement = -1;
int last_ambient_measurement = -1;

int CT_x_offset = 0;
int CT_y_offset = 0;
int CT_x_width = 44;
int CT_y_height = 74;

void setup_CT()
{
  if (therm.begin() == false) { // Initialize thermal IR sensor
    Serial.println("IR thermometer Failed");
    while (1);
  }

  therm.setUnit(TEMP_F); // Set the library's units to Farenheit

}


void CT_Reset()
{
  last_object_measurement = -1;
  last_ambient_measurement = -1;  
}

void CT_Frame()
{
  int box_top = CT_y_offset;
  int box_bottom = box_top + CT_y_height;
  
  int box_left = CT_x_offset;
  int box_right = box_left + CT_x_width;
  
  int box_width = CT_x_width;
  int box_height = CT_y_height;

  int ambient_x_offset = box_left + 1;
  int ambient_y_offset = box_top + 8;
  int object_x_offset = box_left + 1;
  int object_y_offset = ambient_y_offset + 20;

  int ambient_measurement;
  int object_measurement;

  if ((last_ambient_measurement == -1) && (last_object_measurement == -1))
    {
      tft.drawRect(box_left, box_top, box_width, box_height, ST7735_RED);
      tft.setCursor(ambient_x_offset, ambient_y_offset);
      tft.println("MLX90XX");
      tft.setCursor(object_x_offset, object_y_offset);
      tft.println("Object");
      
    }  
  
  therm.read();
  ambient_measurement = therm.ambient();
  object_measurement = therm.object();

  if ( last_ambient_measurement != ambient_measurement)
    {
      tft.setCursor(ambient_x_offset, ambient_y_offset + 8);
      tft.println(String(therm.ambient(), 2));
    }

  if ( last_object_measurement != object_measurement)
    {  
      tft.setCursor(object_x_offset, object_y_offset + 8);
      tft.println(String(therm.object(), 2));
    }

  last_ambient_measurement = ambient_measurement;
  last_object_measurement = object_measurement;      
}

 

AMG8833 Sensor (AMG_Stuff.h)

//low range of the sensor (this will be blue on the screen)
#define MINTEMP 20

//high range of the sensor (this will be red on the screen)
#define MAXTEMP 28

//the colors we will be using
const uint16_t camColors[] = {0x480F,
                              0x400F, 0x400F, 0x400F, 0x4010, 0x3810, 0x3810, 0x3810, 0x3810, 0x3010, 0x3010,
                              0x3010, 0x2810, 0x2810, 0x2810, 0x2810, 0x2010, 0x2010, 0x2010, 0x1810, 0x1810,
                              0x1811, 0x1811, 0x1011, 0x1011, 0x1011, 0x0811, 0x0811, 0x0811, 0x0011, 0x0011,
                              0x0011, 0x0011, 0x0011, 0x0031, 0x0031, 0x0051, 0x0072, 0x0072, 0x0092, 0x00B2,
                              0x00B2, 0x00D2, 0x00F2, 0x00F2, 0x0112, 0x0132, 0x0152, 0x0152, 0x0172, 0x0192,
                              0x0192, 0x01B2, 0x01D2, 0x01F3, 0x01F3, 0x0213, 0x0233, 0x0253, 0x0253, 0x0273,
                              0x0293, 0x02B3, 0x02D3, 0x02D3, 0x02F3, 0x0313, 0x0333, 0x0333, 0x0353, 0x0373,
                              0x0394, 0x03B4, 0x03D4, 0x03D4, 0x03F4, 0x0414, 0x0434, 0x0454, 0x0474, 0x0474,
                              0x0494, 0x04B4, 0x04D4, 0x04F4, 0x0514, 0x0534, 0x0534, 0x0554, 0x0554, 0x0574,
                              0x0574, 0x0573, 0x0573, 0x0573, 0x0572, 0x0572, 0x0572, 0x0571, 0x0591, 0x0591,
                              0x0590, 0x0590, 0x058F, 0x058F, 0x058F, 0x058E, 0x05AE, 0x05AE, 0x05AD, 0x05AD,
                              0x05AD, 0x05AC, 0x05AC, 0x05AB, 0x05CB, 0x05CB, 0x05CA, 0x05CA, 0x05CA, 0x05C9,
                              0x05C9, 0x05C8, 0x05E8, 0x05E8, 0x05E7, 0x05E7, 0x05E6, 0x05E6, 0x05E6, 0x05E5,
                              0x05E5, 0x0604, 0x0604, 0x0604, 0x0603, 0x0603, 0x0602, 0x0602, 0x0601, 0x0621,
                              0x0621, 0x0620, 0x0620, 0x0620, 0x0620, 0x0E20, 0x0E20, 0x0E40, 0x1640, 0x1640,
                              0x1E40, 0x1E40, 0x2640, 0x2640, 0x2E40, 0x2E60, 0x3660, 0x3660, 0x3E60, 0x3E60,
                              0x3E60, 0x4660, 0x4660, 0x4E60, 0x4E80, 0x5680, 0x5680, 0x5E80, 0x5E80, 0x6680,
                              0x6680, 0x6E80, 0x6EA0, 0x76A0, 0x76A0, 0x7EA0, 0x7EA0, 0x86A0, 0x86A0, 0x8EA0,
                              0x8EC0, 0x96C0, 0x96C0, 0x9EC0, 0x9EC0, 0xA6C0, 0xAEC0, 0xAEC0, 0xB6E0, 0xB6E0,
                              0xBEE0, 0xBEE0, 0xC6E0, 0xC6E0, 0xCEE0, 0xCEE0, 0xD6E0, 0xD700, 0xDF00, 0xDEE0,
                              0xDEC0, 0xDEA0, 0xDE80, 0xDE80, 0xE660, 0xE640, 0xE620, 0xE600, 0xE5E0, 0xE5C0,
                              0xE5A0, 0xE580, 0xE560, 0xE540, 0xE520, 0xE500, 0xE4E0, 0xE4C0, 0xE4A0, 0xE480,
                              0xE460, 0xEC40, 0xEC20, 0xEC00, 0xEBE0, 0xEBC0, 0xEBA0, 0xEB80, 0xEB60, 0xEB40,
                              0xEB20, 0xEB00, 0xEAE0, 0xEAC0, 0xEAA0, 0xEA80, 0xEA60, 0xEA40, 0xF220, 0xF200,
                              0xF1E0, 0xF1C0, 0xF1A0, 0xF180, 0xF160, 0xF140, 0xF100, 0xF0E0, 0xF0C0, 0xF0A0,
                              0xF080, 0xF060, 0xF040, 0xF020, 0xF800,
                             };

Adafruit_AMG88xx amg;
unsigned long delayTime;

#define AMG_COLS 8
#define AMG_ROWS 8
float pixels[AMG_COLS * AMG_ROWS];

#define INTERPOLATED_COLS 24
#define INTERPOLATED_ROWS 24


float get_point(float *p, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
void set_point(float *p, uint8_t rows, uint8_t cols, int8_t x, int8_t y, float f);
void get_adjacents_1d(float *src, float *dest, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
void get_adjacents_2d(float *src, float *dest, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
float cubicInterpolate(float p[], float x);
float bicubicInterpolate(float p[], float x, float y);
void interpolate_image(float *src, uint8_t src_rows, uint8_t src_cols,
                       float *dest, uint8_t dest_rows, uint8_t dest_cols);

void setup_AMG()
{
  if (!amg.begin()) 
    {
      Serial.println("Could not find a valid AMG88xx sensor, check wiring!");
      while (1) { delay(1); }
    }
  //  Serial.println("-- Thermal Camera Test --");
}

void AMG_Reset()
{
  
}

void drawpixels(int x_offset, int y_offset, float *p, uint8_t rows, uint8_t cols, uint8_t boxWidth, uint8_t boxHeight) 
{
  int colorTemp;
//  int x_offset = 4, y_offset = 0;
  
  for (int y = 0; y < rows; y++) 
  {
    for (int x = 0; x < cols; x++) 
    {
      float val = get_point(p, rows, cols, x, y);
      if (val >= MAXTEMP) colorTemp = MAXTEMP;
      else if (val <= MINTEMP) colorTemp = MINTEMP;
      else colorTemp = val;

      uint8_t colorIndex = map(colorTemp, MINTEMP, MAXTEMP, 0, 255);
      colorIndex = constrain(colorIndex, 0, 255);
      //draw the pixels!
      uint16_t color;
      color = val * 2;
      tft.fillRect(x_offset + (boxWidth * x), y_offset + (((rows-1)  - y) * boxHeight), boxWidth, boxHeight, camColors[colorIndex]);
    }
  }
}

int AMG_x_offset = 44;
int AMG_y_offset = 0;
int AMG_x_width = 74;
int AMG_y_height = 74;


void AMG_Frame()
{

  int AMG_box_top = AMG_y_offset;
  int AMG_box_left = AMG_x_offset;
  int AMG_box_bottom = AMG_box_top + AMG_y_height;
  int AMG_box_right = AMG_box_left + AMG_x_width;
  int AMG_box_width = AMG_x_width;
  int AMG_box_height = AMG_y_height;
  int AMG_frame_left = AMG_box_left + 1;
  int AMG_frame_top = AMG_box_top + 1;
  
  int box_size = 3;
  
  //read all the pixels
  amg.readPixels(pixels);
  float dest_2d[INTERPOLATED_ROWS * INTERPOLATED_COLS];
  int32_t t = millis();
  interpolate_image(pixels, AMG_ROWS, AMG_COLS, dest_2d, INTERPOLATED_ROWS, INTERPOLATED_COLS);
//  Serial.print("Interpolation took "); Serial.print(millis() - t); Serial.println(" ms");
//  uint16_t boxsize = min(tft.width() / INTERPOLATED_COLS, tft.height() / INTERPOLATED_COLS);
  tft.drawRect(AMG_box_left, AMG_box_top, AMG_box_width, AMG_box_height, ST7735_ORANGE);
  drawpixels(AMG_frame_left,AMG_frame_top,dest_2d, INTERPOLATED_ROWS, INTERPOLATED_COLS, box_size, box_size);  
}

 

BioAmp EXG (EXG_Stuff.h)

#define EXG_SAMPLE_SIZE 155
#define EXG_PIN A0

int EXG_x_offset = 0;
int EXG_y_offset = 0;
int EXG_x_width = 128;
int EXG_y_height = 160;

void EXG_Frame()
{  
  
  int box_top = EXG_y_offset;
  int box_bottom = box_top + EXG_y_height;
  
  int box_left = EXG_x_offset;
  int box_right = box_left + EXG_x_width;
  
  int box_width = EXG_x_width;
  int box_height = EXG_y_height;

  tft.fillRect(box_left, box_top, box_width, box_height, ST7735_WHITE);
  tft.drawRect(box_left+1, box_top+1, box_width-3, box_height-3, ST7735_BLACK);
  
}

void EXG_Display_Data(int * EXG_data)
{
  int box_top = EXG_y_offset;
  int box_bottom = box_top + EXG_y_height;
  
  int box_left = EXG_x_offset;
  int box_right = box_left + EXG_x_width;
  
  int box_width = EXG_x_width;
  int box_height = EXG_y_height;
  
  int max_value = -5000;
  int min_value = 5000;
  int data_point1,data_point2;
  
  tft.fillRect(box_left+2, box_top+2, box_width-5, box_height-5, ST7735_WHITE);
  
  for(int x=0;x<EXG_SAMPLE_SIZE; ++x)
    {
      if (EXG_data[x] > max_value)
        max_value = EXG_data[x];
      if (EXG_data[x] < min_value)
        min_value = EXG_data[x];        
    }
  for(int x=0;x<EXG_SAMPLE_SIZE-1; ++x)
  {
    data_point1 = map(EXG_data[x],min_value,max_value,2,124);
    data_point2 = map(EXG_data[x+1],min_value,max_value,2,124);
    tft.drawLine(data_point1,x+2,data_point2,x+3,ST7735_RED);
    Serial.println(data_point1);
  }
    
}

void EXG_Collect()
{
  int EXG_Delay = 30;  
  int EXG_data[EXG_SAMPLE_SIZE];
  
  for(int x=0;x<EXG_SAMPLE_SIZE; ++x)
    {
      EXG_data[x] = analogRead(EXG_PIN);
      delay(EXG_Delay);
    }

  EXG_Display_Data(EXG_data);
  
}


void EXG_Demo()
{
  EXG_Frame();
  while(1)
    {
      EXG_Collect();      
    }
}
 

Core

void setup()
{
  Wire.begin();
  Serial.begin(115200);

  Serial.println("SETUP - Begin");
  Serial.println("TFT");
  setup_TFT();
  Serial.println("CT");
  setup_CT();
  Serial.println("AMG");
  setup_AMG();
  Serial.println("VL");
  setup_VL();  
  Serial.println("HB");
  setup_HB();
  Serial.println("FP");
  setup_FP();
  Serial.println("SETUP - End");
}

void loop()
{
  
  VL_Frame();
  AMG_Frame();
  CT_Frame();
  FP_Frame();
  HB_Frame();

  if (EXG_Mode)
    {
      EXG_Frame();
      while(EXG_Mode)
        {
          EXG_Collect();
          VL_Reading();
        }
      TFT_Reset();
      VL_Reset();
      AMG_Reset();
      CT_Reset();
      FP_Reset();  
      HB_Reset();
    }  
}
 

Pseudo-Medical Monitor