Difference between revisions of "Pseudo Medical Monitor Device 3D Print"

From LVL1
Jump to navigation Jump to search
Line 32: Line 32:
 
  Provides corner bracketing for EEG External Unit
 
  Provides corner bracketing for EEG External Unit
 
  Threaded Inserts installed after printing
 
  Threaded Inserts installed after printing
−
|-
 
−
|[[File:JAC MED MON RESPIRATORY SENSOR BOX.jpg|left|thumbnail|x200px]]
 
−
| Respiratory Sensor Signal Amplifier Box and Cover
 
−
|
 
−
Provides enclosure of PCB
 
−
Access to adjustment potentiometer from cover
 
 
|-
 
|-
 
|
 
|

Revision as of 22:24, 10 December 2021

Printed Parts

3D Printed Parts
Parts ID Purpose
JAC MED MON CONTROL PANEL BRACKETS.jpg
Control Panel Brackets 
Fasten Control Panel to Main Device Sensor Layer 
Brackets are not symmetrical and are tailored for the Main Device Sensor Layer hole placement
Screws shown with nuts provide offset positioning
JAC MED MON PORT MOUNTING BRACKETS.jpg
Port Mounting Brackets 
Secure RJ45 Ports to Arduino DUE base layer of Main Device
Brackets are not symmetrical and are tailored for the Arduino DUE hole placement
Velco added post printing
JAC MED MON ATTINY85 TOKEN BOX PARTS.jpg
ATTiny85 Token Enclosure Box and Cover Provides an enclosure for ATTiny85 Tokens
JAC MED MON EEG BOX BRACKETS.jpg
Corner Bracket Set 
Provides corner bracketing for EEG External Unit
Threaded Inserts installed after printing
JAC MED MON RESPIRATORY SENSOR A COMPRESSION BRACKET.jpg
Respiratory Sensor A Compression Bracket 
Encase IR Distance Compression Sensor
JAC MED MON RESPIRATORY SENSOR A STABLIZING BASE.jpg
Respiratory Sensor A Orientation Stabilizer

Keep compression sensor oriented

JAC MED MON RESPIRATORY SENSOR A CRADLE.jpg
Respiratory Sensor A Cradle

Secure Telescoping Tube to sensor

JAC MED MON RESPIRATORY SENSOR B PLUNGER.jpg
Respiratory Sensor B Sliding Plunger

Proximity surface for IR reflectance Sensor

JAC MED MON RESPIRATORY SENSOR B CRADLE.jpg
Respiratory Sensor B Cradle

Secure Telescoping Tube to sensor

JAC MED MON EKG SIGNAL BOX.jpg
Respiratory Sensor Signal Amplifier Box and Cover 
Amplify Breathing Sensor Type A Signal
Provides enclosure of PCB
Access to adjustment potentiometer from cover

Assemblies With Printed Parts

Respiratory Sensor used with EKG External Unit

Renders
JAC MED MON RESP MODEL RENDER.jpg
  • Two Compression Brackets
  • IR Distance Compression Sensor Inside
JAC MED MON RESP MODEL 1 RENDER A.jpg
  • BLUE - Compression Sensor Orientation Stabilizer
  • YELLOW - Compression Sensor Bracket Oriented as Lower
  • GREEN - Compression Sensor Bracket Oriented as Upper
  • CYAN - Telescoping Tube Cradle
  • RED - Rubber Band (Provides Flexing of Compression Sensor Brackets)
  • VIOLET - Fastner (Holds Exterior Telescoping Tube Secure and Allows Inner Tube to Move)
  • SEMI-TRANSPARENT GREEN - Outer Telescoping Tube (Inner Telescoping Tube visible)

Respiratory Sensor used with Poly-Liar External Unit

Renders
JAC MED MON RESP MODEL 2 RENDER C.jpg
  • YELLOW - Telescoping Tube Cradle
  • GREEN - Sliding Plunger
  • RED - Rubber Band (Provides Resistance and Recoil for Sliding Plunger against Telescoping Cradle)
  • VIOLET - Reflectance Sensor PCB
  • BLUE - Fastner (Secures Slinging Plunger to Inner Telescoping Tube)
  • ORANGE - Inner Telescoping Tube
  • SEMI-TRANSPARENT BLUE - Guide Tube for Sliding Plunger
  • SEMI-TRANSPARENT GREEN - Outer Telescoping Tube
JAC MED MON RESP MODEL 2 RENDER B.jpg
  • YELLOW - Telescoping Tube Cradle
  • GREEN - Sliding Plunger
  • RED - Rubber Band (Provides Resistance and Recoil for Sliding Plunger against Telescoping Cradle)
  • BLUE - Fastner (Secures Slinging Plunger to Inner Telescoping Tube)
  • ORANGE - Inner Telescoping Tube
  • SEMI-TRANSPARENT GREEN - Outer Telescoping Tube

Pseudo-Medical Monitor Device Design

Pseudo-Medical Monitor

Retrieved from "http://wiki.lvl1.org/index.php?title=Pseudo_Medical_Monitor_Device_3D_Print&oldid=14604"