Revision as of 00:53, 10 December 2021

Printed Parts

3D Printed Parts
Parts	ID	Purpose
	Control Panel Brackets	Fasten Control Panel to Main Device Sensor Layer Brackets are not symmetrical and are tailored for the Main Device Sensor Layer hole placement Screws shown with nuts provide offset positioning
	Port Mounting Brackets	Secure RJ45 Ports to Arduino DUE base layer of Main Device Brackets are not symmetrical and are tailored for the Arduino DUE hole placement Velco added post printing
	ATTiny85 Token Enclosure Box and Cover	Provides an enclosure for ATTiny85 Tokens
	Corner Bracket Set	Provides corner bracketing for EEG External Unit Threaded Inserts installed after printing
	Respiratory Sensor Signal Amplifier Box and Cover	Provides enclosure of PCB Access to adjustment potentiometer from cover
	Respiratory Sensor A Compression Bracket	Encase IR Distance Compression Sensor
	Respiratory Sensor A Cradle	Secure Telescoping Tube to sensor
	Respiratory Sensor B Sliding Plunger	Proximity surface for IR reflectance Sensor
	Respiratory Sensor B Cradle	Secure Telescoping Tube to sensor

Renders
	Two Compression Brackets IR Distance Compression Sensor Inside
	BLUE - Compression Sensor Orientation Stabilizer YELLOW - Compression Sensor Bracket Oriented as Lower GREEN - Compression Sensor Bracket Oriented as Upper CYAN - Telescoping Tube Cradle RED - Rubber Band (Provides Flexing of Compression Sensor Brackets) VIOLET - Fastner (Holds Exterior Telescoping Tube Secure and Allows Inner Tube to Move) SEMI-TRANSPARENT GREEN - Outer Telescoping Tube (Inner Telescoping Tube visible)

Renders
	YELLOW - Telescoping Tube Cradle GREEN - Sliding Plunger RED - Rubber Band (Provides Resistance and Recoil for Sliding Plunger against Telescoping Cradle) VIOLET - Reflectance Sensor PCB BLUE - Fastner (Secures Slinging Plunger to Inner Telescoping Tube) ORANGE - Inner Telescoping Tube SEMI-TRANSPARENT BLUE - Guide Tube for Sliding Plunger SEMI-TRANSPARENT GREEN - Outer Telescoping Tube
	YELLOW - Telescoping Tube Cradle GREEN - Sliding Plunger RED - Rubber Band (Provides Resistance and Recoil for Sliding Plunger against Telescoping Cradle) BLUE - Fastner (Secures Slinging Plunger to Inner Telescoping Tube) ORANGE - Inner Telescoping Tube SEMI-TRANSPARENT GREEN - Outer Telescoping Tube

@@ Line 23: / Line 23: @@
   Velco added post printing
 |-
-|[[File:JAC MED MON ATTINY85 TOKEN BOX PARTS.jpg|thumb]]
+|[[File:JAC MED MON ATTINY85 TOKEN BOX PARTS.jpg|left|thumbnail|x200px]]
 | ATTiny85 Token Enclosure Box and Cover
 | Provides an enclosure for ATTiny85 Tokens
 |-
-|[[File:JAC MED MON EEG BOX BRACKETS.jpg|thumb]]
+|[[File:JAC MED MON EEG BOX BRACKETS.jpg|left|thumbnail|x200px]]
 | Corner Bracket Set
 |
@@ Line 33: / Line 33: @@
   Threaded Inserts installed after printing
 |-
-|[[File:JAC MED MON RESPIRATORY SENSOR BOX.jpg|thumb]]
+|[[File:JAC MED MON RESPIRATORY SENSOR BOX.jpg|left|thumbnail|x200px]]
 | Respiratory Sensor Signal Amplifier Box and Cover
 |