Pseudo-Medical Monitor Device Design: Difference between revisions

From LVL1
Jump to navigation Jump to search
← Older editNewer edit →
Line 15: Line 15:


{|class="wikitable"
{|class="wikitable"
!colspan="2"|PARTS
!colspan="4"|PARTS
|-
|-
|Device
|Device
Line 22: Line 22:
|[[File:JAC MED MON ARDUINO DUE.jpg|left|thumbnail|x200px]]
|[[File:JAC MED MON ARDUINO DUE.jpg|left|thumbnail|x200px]]
|* Arduino Due Generic Clone (alternative: ITEADUINO DUE)
|* Arduino Due Generic Clone (alternative: ITEADUINO DUE)
|
|[[File:JAC MED MON MLX90614.jpg|left|thumbnail]]
|[[File:JAC MED MON MLX90614.jpg|left|thumbnail]]
|* MLX90614 Contactless Temperature Sensor Generic Clone (alternative: )
|* MLX90614 Contactless Temperature Sensor Generic Clone (alternative: )
Line 28: Line 27:
|[[File:JAC MED MON AMG8833.jpg|left|thumbnail]]
|[[File:JAC MED MON AMG8833.jpg|left|thumbnail]]
|* AMG8833 Thermal Imager Sensor Generic Clone (alternative: TinyCircuits)
|* AMG8833 Thermal Imager Sensor Generic Clone (alternative: TinyCircuits)
|
|[[File:JAC MED MON VL53L0X.jpg|left|thumbnail]]
|[[File:JAC MED MON VL53L0X.jpg|left|thumbnail]]
|* VL53L0X TOF Laser Distance Sensor Generic Clone (alternative: Onyehn)
|* VL53L0X TOF Laser Distance Sensor Generic Clone (alternative: Onyehn)
Line 34: Line 32:
|[[File:JAC MED MON MAX30102.jpg|left|thumbnail]]
|[[File:JAC MED MON MAX30102.jpg|left|thumbnail]]
|* MAX30102 Pulse and O2 Saturation Sensor Generic Clone (alternative: MH-ET Live)
|* MAX30102 Pulse and O2 Saturation Sensor Generic Clone (alternative: MH-ET Live)
|
|[[File:JAC MED MON FP SCANNER.jpg|left|thumbnail]]
|[[File:JAC MED MON FP SCANNER.jpg|left|thumbnail]]
|* Capacitive Touch Fingerprint Scanner Generic Clone (alternative: DFROBOT)
|* Capacitive Touch Fingerprint Scanner Generic Clone (alternative: DFROBOT)
Line 40: Line 37:
|[[File:JAC MED MON TFT.jpg|left|thumbnail]]
|[[File:JAC MED MON TFT.jpg|left|thumbnail]]
|* 160x128 LCD TFT SPI 1.8" Module with SD Socket Generic Clone (alternative: Heyaodz111208)
|* 160x128 LCD TFT SPI 1.8" Module with SD Socket Generic Clone (alternative: Heyaodz111208)
|
|[[File:JAC MED MON PULSE SENSOR.jpg|left|thumbnail]]
|[[File:JAC MED MON PULSE SENSOR.jpg|left|thumbnail]]
|* IR Pulse Sensor with incorrect Labelling (Qty. 2)
|* IR Pulse Sensor with incorrect Labelling (Qty. 2)
Line 46: Line 42:
|[[File:JAC MED MON TMP36 SENSOR.jpg|left|thumbnail]]
|[[File:JAC MED MON TMP36 SENSOR.jpg|left|thumbnail]]
|* TMP36 Temperature Sensor
|* TMP36 Temperature Sensor
|
|[[File:JAC MED MON VS1103 MODULE.jpg|left|thumbnail]]
|[[File:JAC MED MON VS1103 MODULE.jpg|left|thumbnail]]
|* VS1103 Audio Module (old module finally put to use)
|* VS1103 Audio Module (old module finally put to use)

Revision as of 19:48, 8 December 2021

Design

This Amazing, Affordable, Earth Changing Device, for which no endorsement is to be inferred, is designed as a collection of layers.

  • Layers
    • Main Unit Sensor Layer
    • Audio Layer
    • Port Unit Layer
    • Processor Layer

The device is flanked by two sets of two RJ45 Socket Units. A Controls Unit is placed at one end.


Parts List

PARTS
Device Name
* Arduino Due Generic Clone (alternative: ITEADUINO DUE)
* MLX90614 Contactless Temperature Sensor Generic Clone (alternative: )
* AMG8833 Thermal Imager Sensor Generic Clone (alternative: TinyCircuits)
* VL53L0X TOF Laser Distance Sensor Generic Clone (alternative: Onyehn)
* MAX30102 Pulse and O2 Saturation Sensor Generic Clone (alternative: MH-ET Live)
* Capacitive Touch Fingerprint Scanner Generic Clone (alternative: DFROBOT)
* 160x128 LCD TFT SPI 1.8" Module with SD Socket Generic Clone (alternative: Heyaodz111208)
* IR Pulse Sensor with incorrect Labelling (Qty. 2)
* TMP36 Temperature Sensor
* VS1103 Audio Module (old module finally put to use)
* RJ45 Connection Boxes

Shield Levels

SHIELDS
Shield Name
* Arduino Mega Prototype Shield Generic Clone (alternative: KEYESTUDIO) (Analog Testing connector added after photo)
* Audio Shield with VS1103
* Ports Shield

Assemblies

ASSEMBLIES
Assembly Name Notes Schematics
Control Panel
  • PCA8574 I/O Expander
  • Dual rotary Encoders
  • Two LEDs
Hand Held Unit PCB
  • MPU6050
  • Vibrating Motor Circuit
BioAmp EXG Pill
BioAmp EXG Pill Modification for EEG
Breathing Detector Signal Amplifier
  • Basic Op-Amp
GSR
  • TL074 Op-Amp
  • PCB acts as central wiring hub for External Unit
NeoPixel I2C Controller
  • ATTINY85
  • TinyWireS Library
  • Single NeoPixel
  • Local Reset Button
Tone I2C Controller
  • ATTINY85 (Specific Core Selection Needed)
  • TinyWireS Library
  • Single Piezo Speaker
  • Local Reset Button
Eye Tracking Goggles
  • Three IR Reflectance Sensors
  • BNO055 IMU
  • Semi-Reflective IR Reduction Filter
  • Under Review Due To Blindness Hazard

Units

Breakdowns

External EKG-Respiration Unit

BioApm EXG Pill EKG Circuit

NeoPixel I2C Controller

Respiration Detection Sensor Assembly Render Respiration Detector Signal Conditioner

Assembly without Harness Respiration Detection Sensor Assembly Attached to Harness

External Hand Held Unit

External Poly-Liar Unit

Respiration Detection Sensor Rendered Model Respiration Detection Sensor Attached to Harness

GSR Circuit Tone I2C Controller

Pulse Sensor TMP36 Temperature Sensor

GSR Finger Contacts

Goggles Simple Unit

Basic Driver Board Boxed

MPU Replaced with IMU Prototype for Testing

External EEG Simple Unit

Under Construction

Connections

Arduino DUE Pin Usage Baseline 1

Main Shield

Pin Mapping
Due Pin Function MLX90614 AMG8833 VL53L0X MAX30102 FP Scan TFT SD Socket Analog Test Socket
3 Interrupt IRQ
4 Interrupt INT
5 Interrupt INT
6 Digital I/O GPIO1
7 Digital I/O XSHUT
8 Digital I/O SD_CS
9 Digital I/O RST
10 Digital I/O CS
11 Digital I/O AO
18 TX_1 RX
19 RX_1 TX
20 SDA SDA SDA SDA SDA
21 SCL SCL SCL SCL SCL
A0 Signal
SPI MISO SD_MISO
SPI MOSI SDA SD_MOSI
SPI SCK SCK SD_SCK

Control Panel

Pin Mapping
Device SIGNAL DUE Pin Function
Controls Vin 3.3V Power
Controls SDA 20 SDA-I2C
Controls SCL 21 SCL-I2C
Controls INT 2 GPIO
Controls GND GND Power

Audio Shield

Pin Mapping
Device SIGNAL DUE Pin Function
VS1103 Vin 3.3V Power
VS1103 GND GND Power
VS1103 TX 17 RX-Serial2
VS1103 RX 16 TX-Serial2
VS1103 GPIO0 30 GPIO
VS1103 GPIO1 32 GPIO
VS1103 RST 28 GPIO
VS1103 DREQ 24 GPIO
VS1103 BSYNC 26 GPIO
VS1103 CS 22 GPIO
VS1103 SO SPI-HDR MISO
VS1103 SI SPI-HDR MOSI
VS1103 SCLK SPI-HDR SCK

Ports Shield

Pin Mapping
Port # Line # DUE Pin Function Port # Line # DUE Pin Function Port # Line # DUE Pin Function Port # Line # DUE Pin Function
0 1 3.3V Power 1 1 3.3V Power 2 1 3.3V Power 3 1 3.3V Power
0 2 GND Power 1 2 GND Power 2 2 GND Power 3 2 GND Power
0 3 70 I2C-SDA 1 3 70 I2C-SDA 2 3 70 I2C-SDA 3 3 70 I2C-SDA
0 4 71 I2C-SCL 1 4 71 I2C-SCL 2 4 71 I2C-SCL 3 4 71 I2C-SCL
0 5 53 GPIO0 1 5 27 GPIO0 2 5 A10/64 Analog0 3 5 A5/59 Analog0
0 6 51 GPIO1 1 6 29 GPIO1 2 6 A9/63 Analog1 3 6 A4/58 Analog1
0 7 49 GPIO2 1 7 31 GPIO2 2 7 A8/62 Analog2 3 7 A3/57 Analog2
0 8 A11/65 Analog0 1 8 A6/60 Analog0 2 8 A7/61 Analog3 3 8 A2/56 Analog3

External Hand-Held Unit : Valid Ports (0-3)

Pin Mapping
Line # Device Signal Function
1 3.3V Power
2 GND Power
3 MPU6050 I2C-SDA
4 MPU6050 I2C-SCL
5 MPU6050-INT GPIO
6 Vibrating Motor I/O GPIO
7 Momentary Push Button GPIO
8 Grip Sensor Analog

External EKG-Respiration Unit : Valid Ports (2-3)

Pin Mapping
Line # Device Signal Function
1 3.3V Power
2 GND Power
3 NeoPixel Controller I2C-SDA
4 NeoPixel Controller I2C-SCL
5 Respiration Detection Analog
6 Respiration Detection Adjust Analog
7 N/C Analog
8 Heart Beat Signal Analog

External EEG Simple Unit : Valid Ports (2-3)

Pin Mapping
Line # Device Signal Function
1 3.3V Power
2 GND Power
3 N/C I2C-SDA
4 N/C I2C-SCL
5 Signal 0 Analog
6 Signal 1 Analog
7 Signal 2 Analog
8 Singal 3 Analog

External Poly-Liar Unit : Valid Ports (2-3)

Pin Mapping
Line # Device Signal Function
1 3.3V Power
2 GND Power
3 Tone Controller I2C-SDA
4 Tone Controller I2C-SCL
5 Respiration Detection Analog
6 Skin Temperature Analog
7 Pulse Detection Analog
8 GSR Signal Analog

External Goggles Simple Unit : Valid Ports (2-3)

Pin Mapping
Line # Device Signal Function
1 3.3V Power
2 GND Power
3 MPU6050 I2C-SDA
4 MPU6050 I2C-SCL
5 Top Sensor Analog0
6 Bottom Right Sensor Analog1
7 Bottom Left Sensor Analog2
8 N/C

Code (Updated 11/16/2021)

Special Libraries

#include <Adafruit_GFX.h>

#include <Adafruit_ST7735.h>

#include <Adafruit_VL53L0X.h>

#include <Adafruit_AMG88xx.h>

#include <MAX30105.h>

#include <SparkFunMLX90614.h>

#include <DFRobot_ID809.h>

#include "bmpHeader.h"

#include <SD.h>

#include <Adafruit_MPU6050.h>

#include <Adafruit_Sensor.h>

#include <pu2clr_pcf8574.h>

Library Modification

// In this Library : #include <SparkFunMLX90614.h> 
//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.
//
//  I2C processing change needed for Arduino Due implementation
//
// Comment Out Line Below
//	_i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true); 

// Add Line Below
      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);

Code Listing

Pseudo-Medical Monitor Code

Main Pseudo-Medical Monitor Page

Pseudo-Medical Monitor
Retrieved from "http://wiki.lvl1.org/index.php?title=Pseudo-Medical_Monitor_Device_Design&oldid=14035"