Pseudo-Medical Monitor

Pseudo-Medical Monitor for Christmas Cheap Gift

In preparation for the expected Christmas Gift availability crisis, I present the Pseudo-Gift of the season. The time honored tradition of knockoff products hitting the market before Christmas is alive and well. What better than a multi-property knockoff device? Star Trek / Arduino / Medical knockoff device gift for everyone. This Pseudo-Medical Tricorder ripoff is the stocking stuffer for 2021.

Operations

• Thermal Image from AMG8833 Sensor.
• Ambient and Object Temperature from MLX90614 Sensor.
• Distance of device from user via VL53L0X Laser TOF Sensor.
• Pulse Rate from MAX30102 Sensor
• Fingerprint Scan image capture from Capacitive Sensor with ID809 processing capabilities.

Parts List

• Arduino Due Generic Clone (alternative: ITEADUINO DUE)

• Arduino Mega Prototype Shield Generic Clone (alternative: KEYESTUDIO)

• MLX90614 Contactless Temperature Sensor Generic Clone (alternative: )

• AMG8833 Thermal Imager Sensor Generic Clone (alternative: TinyCircuits)

• VL53L0X TOF Laser Distance Sensor Generic Clone (alternative: Onyehn)

• MAX30102 Pulse and O2 Saturation Sensor Generic Clone (alternative: MH-ET Live)

• Capacitive Touch Fingerprint Scanner Generic Clone (alternative: DFROBOT)

• 160x128 LCD TFT SPI 1.8" Module with SD Socket Generic Clone (alternative: Heyaodz111208)

Wiring

Pin Mapping
Due Pin	Function	MLX90614	AMG8833	VL53L0X	MAX30102	FP Scan	TFT	SD Socket
3	Interrupt					IRQ
4	Interrupt				INT
5	Interrupt		INT
6	Digital I/O			GPIO1
7	Digital I/O			XSHUT
8	Digital I/O							SD_CS
9	Digital I/O						RST
10	Digital I/O						CS
11	Digital I/O						AO
18	TX_1					RX
19	RX_1					TX
20	SDA	SDA	SDA	SDA	SDA
21	SCL	SCL	SCL	SCL	SCL
SPI	MISO							SD_MISO
SPI	MOSI						SDA	SD_MOSI
SPI	SCK						SCK	SD_SCK

Code

Special Libraries

#include <Adafruit_GFX.h>

#include <Adafruit_ST7735.h>

#include <Adafruit_VL53L0X.h>

#include <Adafruit_AMG88xx.h>

#include <MAX30105.h>

#include <SparkFunMLX90614.h>

#include <DFRobot_ID809.h>

Library Modification

// In this Library : #include <SparkFunMLX90614.h> 

//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.

//

//  I2C processing change needed for Arduino Due implementation

//

// Comment Out Line Below

//	_i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true); 

// Add Line Below

      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);

Defines - Variables - Routines

#include <Wire.h>
#include <SPI.h>

#include <Adafruit_GFX.h>    
#include <Adafruit_ST7735.h> 
#include "Adafruit_VL53L0X.h"
#include <Adafruit_AMG88xx.h>
#include <MAX30105.h>
#include <SparkFunMLX90614.h> 
#include <DFRobot_ID809.h>
#include "bmpHeader.h"
#include <SD.h>

#include "TFT_Stuff.h"

#include "HB_Stuff.h"
#include "AMG_Stuff.h"
#include "VL_Stuff.h"
#include "CT_Stuff.h"
#include "FP_Stuff.h"

void setup()
{
  Wire.begin();
  Serial.begin(115200);

  Serial.println("SETUP - Begin");
  Serial.println("TFT");
  setup_TFT();
  Serial.println("CT");
  setup_CT();
  Serial.println("AMG");
  setup_AMG();
  Serial.println("VL");
  setup_VL();  
  Serial.println("HB");
  setup_HB();
  Serial.println("FP");
  setup_FP();
  Serial.println("SETUP - End");
}



void loop()
{
  VL_Frame();
  AMG_Frame();
  CT_Frame();
  FP_Frame();
  HB_Frame();
}