Veruca Gloop: Difference between revisions
Jump to navigation
Jump to search
Created page with '__NOTOC__ Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 == Specifications == * ''Usable Build Area:'' 100mm Width x 100mm Depth x 130mm Height * …' |
No edit summary |
||
| Line 6: | Line 6: | ||
* ''X/Y Positioning Resolution:'' 0.085mm | * ''X/Y Positioning Resolution:'' 0.085mm | ||
* ''Z Positioning Resolution:'' 3.125 microns | * ''Z Positioning Resolution:'' 3.125 microns | ||
* ''Maximum X/Y | * ''Maximum X/Y Feed rate:'' 5000mm/minute | ||
* ''Maximum Z | * ''Maximum Z Feed rate:'' 200mm/minute | ||
* ''Typical Z-layer height:'' 0.3725mm | * ''Typical Z-layer height:'' 0.3725mm | ||
* ''Outside measurements:'' 350mm x 240mm x 450mm | * ''Outside measurements:'' 350mm x 240mm x 450mm | ||
| Line 14: | Line 14: | ||
* ''Z axis crank'' http://www.thingiverse.com/thing:975 | * ''Z axis crank'' http://www.thingiverse.com/thing:975 | ||
* ''Y axis belt tensioner'' http://www.thingiverse.com/thing:1618 | * ''Y axis belt tensioner'' http://www.thingiverse.com/thing:1618 | ||
* ''Z axis wobble | * ''Z axis wobble arrester'' | ||
== Working on it == | == Working on it == | ||
* 'Z axis wobble' | * 'Z axis wobble' | ||
** http://www.thingiverse.com/thing:2151 | ** http://www.thingiverse.com/thing:2151 | ||
** ordered guide rods need to print | ** ordered guide rods and bushings | ||
** need to print | |||
*** 2 Z floats | |||
*** 4 rail retainer | |||
*** 2 vert clamp plate | |||
*** 1 each vert clamp for Left and Right | |||
== Known Problems == | == Known Problems == | ||
* ''extruder motor seized'' Fixed with http://wiki.makerbot.com/the-great-motor-mystery | * <del>''extruder motor seized''</del> Fixed with http://wiki.makerbot.com/the-great-motor-mystery | ||
* ''Power supply died'' replaced with RMA | * <del>''Power supply died''</del> replaced with RMA | ||
* ''Z axis wobble'' It will die | |||
== Future Ideas == | == Future Ideas == | ||
* 'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication | * 'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication | ||
Revision as of 11:45, 30 October 2010
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010
Specifications
- Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
- X/Y Positioning Resolution: 0.085mm
- Z Positioning Resolution: 3.125 microns
- Maximum X/Y Feed rate: 5000mm/minute
- Maximum Z Feed rate: 200mm/minute
- Typical Z-layer height: 0.3725mm
- Outside measurements: 350mm x 240mm x 450mm
Modifications
- Z axis crank http://www.thingiverse.com/thing:975
- Y axis belt tensioner http://www.thingiverse.com/thing:1618
- Z axis wobble arrester
Working on it
- 'Z axis wobble'
- http://www.thingiverse.com/thing:2151
- ordered guide rods and bushings
- need to print
- 2 Z floats
- 4 rail retainer
- 2 vert clamp plate
- 1 each vert clamp for Left and Right
Known Problems
extruder motor seizedFixed with http://wiki.makerbot.com/the-great-motor-mysteryPower supply diedreplaced with RMA- Z axis wobble It will die
Future Ideas
- 'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication