Pseudo-Medical Monitor Code

Hardware Libraries

 #include <Wire.h>
 #include <SPI.h>
 #include <Adafruit_GFX.h>
 #include <Adafruit_ST7735.h>
 #include <Adafruit_VL53L0X.h>
 #include <Adafruit_AMG88xx.h>
 #include <MAX30105.h>
 #include <SparkFunMLX90614.h> 
 #include <DFRobot_ID809.h>
 #include <SD.h>
 #include <Adafruit_MPU6050.h>
 #include <pu2clr_pcf8574.h>
 #include <TCA9548A.h>
 

Library Modification

// In this Library : #include <SparkFunMLX90614.h> 
//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.
//
//  I2C processing change needed for Arduino Due implementation
//
// Comment Out Line Below
//	_i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true); 

// Add Line Below
      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);

Defines - Variables - Routines

Updates Needed

The following code is a mixing and matching of the example code provided by the referenced Special Libraries.

Custom Includes

#include "TFT_Stuff.h"

#include "SD_Stuff.h"

#include "TK_Stuff.h"

#include "PORT_Stuff.h"

#include "HB_Stuff.h"

#include "AMG_Stuff.h"

#include "VL_Stuff.h"

#include "CT_Stuff.h"

#include "FP_Stuff.h"

#include "NEO_Stuff.h"

#include "EXG_Stuff.h"

#include "Eye_Stuff.h"

#include "MIDI_Stuff.h"

#include "I2CMUX_Stuff.h"

#include "CNTRL_Stuff.h"

#include "Configuration_Stuff.h"

#include "HNDHLD_Stuff.h"

void setup()
{
  Wire.begin();
  Wire1.begin();
  Serial.begin(115200);

  Serial.println("SETUP - Begin");
  Serial.println("TFT");
  setup_TFT();
  Serial.println("SD Card");
  setup_SD();

  Serial.println("I2CMUX");
  setup_I2CMUX();  
  Serial.println("CT");
  setup_CT();
  Serial.println("AMG");
  setup_AMG();
  Serial.println("VL");
  setup_VL();  
  Serial.println("HB");
  setup_HB();
  Serial.println("FP");
  setup_FP();
  Serial.println("CNTRL");
  setup_CNTRL();
  
  Serial.println("SETUP - End");
}


void loop()
{
      VL_Frame();
      AMG_Frame();
      CT_Frame();
      FP_Frame();
      HB_Frame();

    if (Controls.encoder_A_Switch())
      {
        Controls.pcf_event=false;
        delay(20);
        ConfigurationScans();        
        DrawScreenReset();
        VL_Reset();
        AMG_Reset();
        CT_Reset();
        FP_Reset();  
        HB_Reset();
      }
    
}
 

Pseudo-Medical Monitor