Veruca Gloop: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
* '''Z axis wobble''' | * '''Z axis wobble''' | ||
** http://www.thingiverse.com/thing:2151 | ** http://www.thingiverse.com/thing:2151 | ||
** | ** everything is printed and shafts are in | ||
** | ** stuff is prepped to be installed woooo | ||
* '''Automated Build platform belt wobbles''' | * '''Automated Build platform belt wobbles''' | ||
** I have no idea maybe a new belt made of thick kapton built to a tighter tolerance. | ** I have no idea maybe a new belt made of thick kapton built to a tighter tolerance. | ||
== Known Problems == | == Known Problems == | ||
Revision as of 01:03, 2 November 2010
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010
Specifications
- Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
- X/Y Positioning Resolution: 0.085mm
- Z Positioning Resolution: 3.125 microns
- Maximum X/Y Feed rate: 5000mm/minute
- Maximum Z Feed rate: 200mm/minute
- Typical Z-layer height: 0.3725mm
- Outside measurements: 350mm x 240mm x 450mm
Modifications
- Z axis crank http://www.thingiverse.com/thing:975
- Y axis belt tensioner http://www.thingiverse.com/thing:1618
- Z axis wobble arrester http://www.thingiverse.com/thing:3057
Working on it
- Z axis wobble
- http://www.thingiverse.com/thing:2151
- everything is printed and shafts are in
- stuff is prepped to be installed woooo
- Automated Build platform belt wobbles
- I have no idea maybe a new belt made of thick kapton built to a tighter tolerance.
Known Problems
extruder motor seizedFixed with http://wiki.makerbot.com/the-great-motor-mysteryPower supply diedreplaced with RMA- Z axis wobble It will die
- Automated Build platform belt wobbles allowing print to move
Future Ideas
- Print wireless using bluetooth http://wiki.makerbot.com/bluetooth-communication
- Making our own filament http://hackaday.com/2010/08/05/recyclebot-digests-milk-jugs-to-feed-makerbot/