Veruca Gloop: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
== Specifications == | == Specifications == | ||
* ''Usable Build Area:'' 100mm Width x 100mm Depth x 130mm Height | * '''Usable Build Area:''' 100mm Width x 100mm Depth x 130mm Height | ||
* ''X/Y Positioning Resolution:'' 0.085mm | * '''X/Y Positioning Resolution:''' 0.085mm | ||
* ''Z Positioning Resolution:'' 3.125 microns | * '''Z Positioning Resolution:''' 3.125 microns | ||
* ''Maximum X/Y Feed rate:'' 5000mm/minute | * '''Maximum X/Y Feed rate:''' 5000mm/minute | ||
* ''Maximum Z Feed rate:'' 200mm/minute | * '''Maximum Z Feed rate:''' 200mm/minute | ||
* ''Typical Z-layer height:'' 0.3725mm | * '''Typical Z-layer height:''' 0.3725mm | ||
* ''Outside measurements:'' 350mm x 240mm x 450mm | * '''Outside measurements:''' 350mm x 240mm x 450mm | ||
== Modifications == | == Modifications == | ||
* ''Z axis crank'' http://www.thingiverse.com/thing:975 | * '''Z axis crank''' http://www.thingiverse.com/thing:975 | ||
* ''Y axis belt tensioner'' http://www.thingiverse.com/thing:1618 | * '''Y axis belt tensioner''' http://www.thingiverse.com/thing:1618 | ||
* ''Z axis wobble arrester'' | * '''Z axis wobble arrester''' | ||
== Working on it == | == Working on it == | ||
* 'Z axis wobble' | * '''Z axis wobble''' | ||
** http://www.thingiverse.com/thing:2151 | ** http://www.thingiverse.com/thing:2151 | ||
** ordered guide rods and bushings | ** ordered guide rods and bushings | ||
| Line 25: | Line 25: | ||
*** 2 vert clamp plate | *** 2 vert clamp plate | ||
*** 1 each vert clamp for Left and Right | *** 1 each vert clamp for Left and Right | ||
* '''Automated Build platform belt wobbles''' | |||
** I have no idea maybe a new belt made of thick kapton built to a tighter tolerance. | |||
== Known Problems == | == Known Problems == | ||
* <del>''extruder motor seized''</del> Fixed with http://wiki.makerbot.com/the-great-motor-mystery | * <del>'''extruder motor seized'''</del> Fixed with http://wiki.makerbot.com/the-great-motor-mystery | ||
* <del>''Power supply died''</del> replaced with RMA | * <del>'''Power supply died'''</del> replaced with RMA | ||
* ''Z axis wobble'' It will die | * '''Z axis wobble''' It will die | ||
* '''Automated Build platform belt wobbles''' allowing print to move | |||
== Future Ideas == | == Future Ideas == | ||
* 'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication | * '''Print wireless using bluetooth''' http://wiki.makerbot.com/bluetooth-communication | ||
Revision as of 11:49, 30 October 2010
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010
Specifications
- Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
- X/Y Positioning Resolution: 0.085mm
- Z Positioning Resolution: 3.125 microns
- Maximum X/Y Feed rate: 5000mm/minute
- Maximum Z Feed rate: 200mm/minute
- Typical Z-layer height: 0.3725mm
- Outside measurements: 350mm x 240mm x 450mm
Modifications
- Z axis crank http://www.thingiverse.com/thing:975
- Y axis belt tensioner http://www.thingiverse.com/thing:1618
- Z axis wobble arrester
Working on it
- Z axis wobble
- http://www.thingiverse.com/thing:2151
- ordered guide rods and bushings
- need to print
- 2 Z floats
- 4 rail retainer
- 2 vert clamp plate
- 1 each vert clamp for Left and Right
- Automated Build platform belt wobbles
- I have no idea maybe a new belt made of thick kapton built to a tighter tolerance.
Known Problems
extruder motor seizedFixed with http://wiki.makerbot.com/the-great-motor-mysteryPower supply diedreplaced with RMA- Z axis wobble It will die
- Automated Build platform belt wobbles allowing print to move
Future Ideas
- Print wireless using bluetooth http://wiki.makerbot.com/bluetooth-communication