Pseudo-Medical Monitor Device Design: Difference between revisions

From LVL1
Jump to navigation Jump to search
← Older edit
 
(9 intermediate revisions by the same user not shown)
Line 931: Line 931:
----
----


== Parts List ==
{|class="wikitable"
!colspan="4"|ATTINY85 TOKEN/NEOPIXEL CONTROLLER/TONE CONTROLLER PARTS
|-
|Device
|Name
|-
|[[File:JAC_MED_MON_ATTINY85.jpg|left|thumbnail|x200px]]
|* ATTiny85
|[[File:JAC_MED_MON_TACTILE_SWITCH.jpg|left|thumbnail|x200px]]
|* Tactile Momentary Switch
|-
|
[[File:JAC MED MON ATTINY85 TOKEN BOX PARTS.jpg|thumb]]
| * Enclosure Parts
|}
{|class="wikitable"
!colspan="4"|EXTERNAL UNIT PARTS
|-
|Device
|Name
|-
|[[File:JAC MED MON TMP36 SENSOR.jpg|left|thumbnail|x200px]]
|* TMP36 Temperature Sensor
|[[File:JAC MED MON PULSE SENSOR.jpg|left|thumbnail|x200px]]
|* IR Pulse Sensor with incorrect Labelling (Qty. 2)
|-
|
[[File:JAC MED MON BNO055 PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON NEOPIXEL PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON MPU6050 PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON PCF8574 PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON PIEZO PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON TCA9548A PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON TCRT5000 PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON LED PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON MOMENTARY SWITCH PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON ROTARY ENCODER PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON VIBRATING MOTOR PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC MED MON PROTOTYPE SHIELD PART.jpg|left|thumbnail|x200px]]
|
[[File:JAC_MED_MON_CONTROL_PANEL_BRACKETS.jpg|left|thumbnail|x200px]]
|
[[File:JAC_MED_MON_PORT_MOUNTING_BRACKETS.jpg|left|thumbnail|x200px]]
|}
=== 3D Print Elements ===
[[Pseudo Medical Monitor Device 3D Print]]
== Shield Levels And Panels ==
==Assemblies==
{|class="wikitable"
!colspan="4"| ASSEMBLIES
|-
|Assembly
|Name
|Notes
|Schematics
|-
|
[[File:JAC MED MON GSR CIRCUIT.jpg|left|thumbnail|x200px]]
| GSR
|
* TL074 Op-Amp
* PCB acts as central wiring hub for External Unit
|
[[File:JAC MED MON GSR SCHEMATIC.jpg|left|thumbnail|x200px]]
|-
|
[[File:JAC MED MON TONE ATTINY85.jpg|left|thumbnail|x200px]]
| Tone I2C Controller
|
* ATTINY85 (Specific Core Selection Needed)
* TinyWireS Library
* Single Piezo Speaker
* Local Reset Button
|
[[File:JAC MED MON ATTINY85 TONE UNIT SCHEMATIC.jpg|left|thumbnail|x200px]]
|-
|[[File:JAC MED MON GOGGLES 7.jpg|left|thumbnail|x200px]]
| Eye Tracking Goggles
|
* Three IR Reflectance Sensors
* BNO055 IMU
* Semi-Reflective IR Reduction Filter
* Under Review Due To Blindness Hazard
|
[[File:JAC MED MON GOGGLES SIMPLE SCHEMATIC.jpg|left|thumbnail|x200px]]
|-
|
[[File:JAC_MED_MON_ATTINY85_TOKEN_BOX.jpg|left|thumbnail|x200px]]
| ATTiny85 Token Box
|
* ATTiny85 Token
* Reset Switch
* PCB
Box/Case
|
[[File:JAC_MED_MON_ATTINY85_TOKEN_SCHEMATIC.jpg|left|thumbnail|x200xp]]
|}
==Units==
==Breakdowns==
=== ATTiny85 Token ===
[[File:JAC_MED_MON_ATTINY85_TOKEN_PARTS.jpg|left|thumbnail|x200px]]
[[File:JAC_MED_MON_ATTINY85_TOKEN_BARE.jpg|left|thumbnail|x200px]]
[[File:JAC MED MON ATTINY85 TOKEN BOX_PARTS.jpg|left|thumbnail|x200px]]
[[File:JAC_MED_MON_ATTINY85_TOKEN_BOX.jpg|left|thumbnail|x200px]]
----
===External Poly-Liar Unit===
[[File:JAC MED MON RESP MODEL 2 RENDER.jpg]]
Respiration Detection Sensor Rendered Model
[[File:JAC MED MON RESP MODEL 2 TOP.jpg]]
Respiration Detection Sensor Attached to Harness
[[File:JAC MED MON GSR CIRCUIT.jpg]]
GSR Circuit
[[File:JAC MED MON POLY LIAR UNIT TONE.jpg]]
Tone I2C Controller
[[File:JAC MED MON POLY LIAR PULSE SENSOR.jpg]]
Pulse Sensor
[[File:JAC MED MON POLY LIAR TEMPERATURE SENSOR.jpg]]
TMP36 Temperature Sensor
[[File:JAC MED MON POLY LIAR GSR CONTACTS.jpg]]
GSR Finger Contacts
[[File:JAC MED MON POLY LIAR HAND HOOKUP.jpg]]
===Goggles Simple Unit===
[[File:JAC MED MON GOGGLES SIMPLE DRIVER.jpg]] Basic Driver Board
[[File:JAC MED MON GOGGLES SIMPLE DRIVER BOXED.jpg]] Boxed
[[File:JAC MED MON GOGGLES 1.jpg]]
[[File:JAC MED MON GOGGLES 2.jpg]]
[[File:JAC MED MON GOGGLES MPU.jpg]] MPU Replaced with IMU
[[File:JAC MED MON GOGGLES SIMPLE UNIT.jpg]] Prototype for Testing
[[File:JAC MED MON GOGGLES 3.jpg]]
[[File:JAC MED MON GOGGLES 4.jpg]]
[[File:JAC MED MON GOGGLES 5.jpg]]
[[File:JAC MED MON GOGGLES 6.jpg]]
[[File:JAC MED MON GOGGLES 7.jpg]]
==Connections==
=Code (Updated 11/16/2021)=
===Special Libraries===
<code>
<nowiki>#</nowiki>include <Adafruit_GFX.h>
<nowiki>#</nowiki>include <Adafruit_ST7735.h>
<nowiki>#</nowiki>include <Adafruit_VL53L0X.h>
<nowiki>#</nowiki>include <Adafruit_AMG88xx.h>
<nowiki>#</nowiki>include <MAX30105.h>
<nowiki>#</nowiki>include <SparkFunMLX90614.h>
<nowiki>#</nowiki>include <DFRobot_ID809.h>
<nowiki>#</nowiki>include "bmpHeader.h"
<nowiki>#</nowiki>include <SD.h>
<nowiki>#</nowiki>include <Adafruit_MPU6050.h>
<nowiki>#</nowiki>include <Adafruit_Sensor.h>
<nowiki>#</nowiki>include <pu2clr_pcf8574.h>
</code>
===Library Modification===
<nowiki>
// In this Library : #include <SparkFunMLX90614.h>
//Change the following line in the bool IRTherm::I2CReadWord(byte reg, int16_t * dest) routine.
//
//  I2C processing change needed for Arduino Due implementation
//
// Comment Out Line Below
// _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint8_t) true);
// Add Line Below
      _i2cPort->requestFrom(_deviceAddress, (uint8_t) 3, (uint32_t)reg, (uint8_t)1, (uint8_t)true);
</nowiki>
===Code Listing===
[[Pseudo-Medical Monitor Code]]


= Main Pseudo-Medical Monitor Page =
= Main Pseudo-Medical Monitor Page =


  [[Pseudo-Medical Monitor]]
  [[Pseudo-Medical Monitor]]

Latest revision as of 17:01, 11 December 2021

This Amazing, Affordable, Earth Changing Device, for which no endorsement is to be inferred, is designed as a collection of layers.

Main Unit Sensor Layer

Components

General Components
Device Name Use

Arduino DUE Prototyping Shield

Base PCB for layer

* 160x128 LCD TFT SPI 1.8" Module with SD Socket (Heyaodz111208)

Display and SD Card Socket

Headers Divided into various length for mounting sensors and other devices

Sensors

Sensors
Device Name Description Interface
AMG8833 Thermal Imager Sensor (TinyCircuits) 8x8 thermal image sensor I2C Address 0x69
Capacitive Touch Fingerprint Scanner (DFROBOT) ID809 high-performance processor and semiconductor fingerprint sensor Serial UART
MAX30102 Pulse and O2 Saturation Sensor (MH-ET Live) IR and Visible Pulse and O2 Saturation Measurement I2C Address 0x57
MLX90614 Contactless Temperature Sensor Field and object temperature sensor I2C Address 0x5A
VL53L0X TOF Laser Distance Sensor (Onyehn) IR Laser time of flight distance sensor I2C Address 0x29

Shield Wiring
Pin Mapping
Due Shield Pin Function MLX90614 AMG8833 VL53L0X MAX30102 FP Scan TFT SD Socket Control Panel Analog Test Socket
2 Interrupt INT
3 Interrupt IRQ
4 Interrupt INT
5 Interrupt INT
6 Digital I/O GPIO1
7 Digital I/O XSHUT
8 Digital I/O SD_CS
9 Digital I/O RST
10 Digital I/O CS
11 Digital I/O AO
18 TX_1 RX
19 RX_1 TX
20 SDA SDA SDA SDA SDA SDA
21 SCL SCL SCL SCL SCL SCL
A0 Signal
SPI MISO SD_MISO
SPI MOSI SDA SD_MOSI
SPI SCK SCK SD_SCK

Assembly

Control Panel

Components

Control Panel Part
Device Name Use
RadioShack PCB 276-150 Control Panel PCB
Header Pins (various colors) Connector to Main Sensor Layer and configuration jumpers
Jumper/Short Configure Control Panel I2C Address
PCF8574 Remote 8-Bit I/O Expander Monitor Rotary Encoders and Set LED Condition
LEDs Provide visual ques to user
Rotary Encoder User interface device
Mounting Brackets Control Panel mounting brackets to Main Sensor Layer

Control Panel Wiring

Device Schematic
Pin Mapping
Device SIGNAL DUE Shield Pin Function
Controls Vin 3.3V Power
Controls SDA 20 SDA-I2C
Controls SCL 21 SCL-I2C
Controls INT 2 GPIO
Controls GND GND Power

Assembly

Audio Layer

Components

General Components
Device Name Use

Arduino DUE Prototyping Shield

Base PCB for layer

Breakout Board for VS1103 MIDI Decoder Provide audio to user
Stereo Phono Jack Audio output

Shield Wiring
Pin Mapping
Device SIGNAL DUE Shield Pin Function
VS1103 Vin 3.3V Power
VS1103 GND GND Power
VS1103 TX 17 RX-Serial2
VS1103 RX 16 TX-Serial2
VS1103 GPIO0 30 GPIO
VS1103 GPIO1 32 GPIO
VS1103 RST 28 GPIO
VS1103 DREQ 24 GPIO
VS1103 BSYNC 26 GPIO
VS1103 CS 22 GPIO
VS1103 SO SPI-HDR MISO
VS1103 SI SPI-HDR MOSI
VS1103 SCLK SPI-HDR SCK

Assembly

Ports Layer

Components

General Components
Device Name Use

Arduino DUE Prototyping Shield

Base PCB for layer

TCA9548A 1-to-8 I2C Multiplexer Breakout

  • Provide separate I2C bus isolation for each port
  • I2C Address 0x1E

Dual RJ45 Port Box

Provide External Unit connectivity to device

Shield Wiring

Device Notes
Pin Mapping
Port # Line # DUE Shield Pin Function Port # Line # DUE Shield Pin Function Port # Line # DUE Shield Pin Function Port # Line # DUE Shield Pin Function
0 1 3.3V Power 1 1 3.3V Power 2 1 3.3V Power 3 1 3.3V Power
0 2 GND Power 1 2 GND Power 2 2 GND Power 3 2 GND Power
0 3 MUX-SD0 1 3 MUX-SD1 2 3 MUX-SD2 3 3 MUX-SD3
0 4 MUX-SC0 1 4 MUX-SC1 2 4 MUX-SC2 3 4 MUX-SC3
0 5 53 GPIO0 1 5 27 GPIO0 2 5 A10/64 Analog0 3 5 A5/59 Analog0
0 6 51 GPIO1 1 6 29 GPIO1 2 6 A9/63 Analog1 3 6 A4/58 Analog1
0 7 49 GPIO2 1 7 31 GPIO2 2 7 A8/62 Analog2 3 7 A3/57 Analog2
0 8 A11/65 Analog0 1 8 A6/60 Analog0 2 8 A7/61 Analog3 3 8 A2/56 Analog3
  • Pull-Up Resistors added to second I2C bus on DUE Shield
  • TCA9548A Module is the I2C-MUX
  • I2C-MUX is connected to the second I2C bus on DUE Shield
  • I2C-MUX Reset is connected to DUE Shield PIN D23

Assembly

Processor Layer

Components

Processor Layer
Device Name Use
Arduino Due Generic Clone (ITEADUINO DUE) Main Processor
Mounting Brackets Mounting brackets support RJ45 Dual Port Boxes from Ports Layer

Wiring

Device
DUE Pin DUE Function Device DUE Pin DUE Function Device
0 RX_0 Serial0 13
1 TX_0 Serial0 14 TX_3
2 CP_INT 15 RX_3
3 FP_IRQ 16 TX_2 VS_RX
4 HB_INT 17 RX_2 VS_TX
5 AMG_INT 18 TX_1 FP_RX
6 VL_GPIO01 19 RX_1 FP_TX
7 VL_XSHUT 20 SDA Multiple
8 SD_CS 21 SCL Multiple
9 TFT_RST SDA1 I2C-MUX_SDA
10 TFT_CS SCL1 I2C-MUX_SCL
11 TFT_A0 MISO Multiple
12 MOSI Multiple
SCLK Multiple
DUE Pin DUE Function Device DUE Pin DUE Function Device
A0 RX_0 A8 Port 2-A2
A1 TX_0 A9 Port 2-A1
A2 Port 3-A3 A10 Port 2-A0
A3 Port 3-A2 A11 Port 1-A0
A4 Port 3-A1 DAC0 DAC
A5 Port 3-A0 DAC1 DAC
A6 Port 1-A0 CANRX CAN
A7 Port 2-A3 CANTX CAN
DUE Pin DUE Function Device DUE Pin DUE Function Device
22 VS_CS 23 I2C-MUX_RST
24 VS_DREQ 25
26 VS_XDCS 27 Port 1-GPIO0
28 VS_RST 29 Port 1-GPIO1
30 VS_GPIO0 31 Port 1-GPIO2
32 VS_GPIO1 33
34 35
36 37
38 39
40 41
42 43
44 45
46 47
48 49 Port 0-GPIO2
50 51 Port 0-GPIO1
52 53 Port 0-GPIO0
Prefix Device Prefix Device Prefix Device
VS VS1103 Breakout Board VL VL53L0X HB MAX30102
CP PCF8574A Control Panel FP Fingerprint Scanner AMG AMG8833
TFT ST7735 TFT Display Port X RJ45 Port I2C-MUX TCS9548A
SD SD Card Socket CT MLX90614

Assembly


Main Pseudo-Medical Monitor Page

Pseudo-Medical Monitor
Retrieved from "http://wiki.lvl1.org/index.php?title=Pseudo-Medical_Monitor_Device_Design&oldid=14806"