Veruca Gloop: Difference between revisions

From LVL1
Jump to navigation Jump to search
Imrcly (talk | contribs)
446 edits
Created page with '__NOTOC__ Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 == Specifications == * ''Usable Build Area:'' 100mm Width x 100mm Depth x 130mm Height * …'
 
Notyou007a (talk | contribs)
776 edits
No edit summary
 
(37 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Template:Equipment|owner=LVL1 owned|model=Makerbot Cupcake CNC |serial=2230|arrived=October 16, 2010|doesitwork=Broken|contact=Brian Wagner|where=behind the main room stairs}}<br>
__NOTOC__
__NOTOC__
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010
 
== Current State ==
Not working, boxed under the table


== Specifications ==
== Specifications ==
* ''Usable Build Area:'' 100mm Width x 100mm Depth x 130mm Height  
* '''Audrey 2''' "Mark 6 plus" stepper Extruder head w/.4mm nozzle
* ''X/Y Positioning Resolution:'' 0.085mm  
* '''Usable Build Area:''' 100mm Width x 100mm Depth x 130mm Height  
* ''Z Positioning Resolution:'' 3.125 microns  
* '''X/Y Positioning Resolution:''' 0.085mm  
* ''Maximum X/Y Feedrate:'' 5000mm/minute  
* '''Z Positioning Resolution:''' 3.125 microns  
* ''Maximum Z Feedrate:'' 200mm/minute  
* '''Maximum X/Y Feed rate:''' 5000mm/minute  
* ''Typical Z-layer height:'' 0.3725mm  
* '''Maximum Z Feed rate:''' 200mm/minute  
* ''Outside measurements:'' 350mm x 240mm x 450mm  
* '''Typical Z-layer height:''' 0.3725mm  
* '''Outside measurements:''' 350mm x 240mm x 450mm
 
== Printer settings ==
*Download the replicatorg below to an OSX or Linux box and extract it using the following command:
**tar -xf replicatorg-0025-lvl1.tar.gz
*Run replicatorg:
**cd replicatorg-0025-lvl1
**./replicatorg
*Open an STL file
*Click Move
*Set on platform
*Center
*Click Generate G-Code
*Select type of plastic you're using
**If it's not slightly clear, you're probably using ABS
**The non abs settings have not been tested and might not work.
*Once g-code generation is done you're ready to print!  (I'll write those instructions later)
 
http://dl.dropbox.com/u/16139053/replicatorg-0025-lvl1.tar.gz


== Modifications ==
== Modifications ==
* ''Z axis crank'' http://www.thingiverse.com/thing:975
* '''Z axis crank''' http://www.thingiverse.com/thing:975
* ''Y axis belt tensioner'' http://www.thingiverse.com/thing:1618
* '''Y axis belt tensioner''' http://www.thingiverse.com/thing:1618
* ''Z axis wobble arrestors''
* '''Z axis wobble arrester''' http://www.thingiverse.com/thing:3057


== Working on it ==
== Working on it ==
* 'Z axis wobble'   
* '''Z axis wobble'''   
** http://www.thingiverse.com/thing:2151
** http://www.thingiverse.com/thing:2151
** ordered guide rods need to print more wobble arrestors and guides
** everything is printed and shafts are in
 
** parts are installed needs to be tweaked
* '''Automated Build platform belt wobbles'''
**  I have no idea maybe a new belt made of thick kapton tape built to a tighter tolerance. covering it with pieces of narrow kapton seems to work for now.


== Known Problems ==
== Known Problems ==
* ''extruder motor seized'' Fixed with http://wiki.makerbot.com/the-great-motor-mystery
* <del>'''extruder motor seized'''</del> Fixed with http://wiki.makerbot.com/the-great-motor-mystery
* ''Power supply died'' replaced with RMA  
* <del>'''Power supply died'''</del> replaced with RMA  
 
* '''Z axis wobble'''  It will die
* '''Automated Build platform belt wobbles''' allowing print to move    -- this part has been removed until a suitable solution can be devised


== Future Ideas ==
== Future Ideas ==
* 'Print wireless using bluetooth' http://wiki.makerbot.com/bluetooth-communication
* '''Print wireless using bluetooth''' http://wiki.makerbot.com/bluetooth-communication
* '''Making our own filament''' http://hackaday.com/2010/08/05/recyclebot-digests-milk-jugs-to-feed-makerbot/

Latest revision as of 20:40, 8 June 2015

Back to list of Equipment

Veruca_Gloop&.png

Equipment Overview

  • Owner/Loaner: LVL1 owned
  • Serial Number: 2230
  • Make/Model: Makerbot Cupcake CNC
  • Arrival Date: October 16, 2010
  • Usability: Broken
  • Contact: Brian Wagner
  • Where: behind the main room stairs



Current State

Not working, boxed under the table

Specifications

  • Audrey 2 "Mark 6 plus" stepper Extruder head w/.4mm nozzle
  • Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
  • X/Y Positioning Resolution: 0.085mm
  • Z Positioning Resolution: 3.125 microns
  • Maximum X/Y Feed rate: 5000mm/minute
  • Maximum Z Feed rate: 200mm/minute
  • Typical Z-layer height: 0.3725mm
  • Outside measurements: 350mm x 240mm x 450mm

Printer settings

  • Download the replicatorg below to an OSX or Linux box and extract it using the following command:
    • tar -xf replicatorg-0025-lvl1.tar.gz
  • Run replicatorg:
    • cd replicatorg-0025-lvl1
    • ./replicatorg
  • Open an STL file
  • Click Move
  • Set on platform
  • Center
  • Click Generate G-Code
  • Select type of plastic you're using
    • If it's not slightly clear, you're probably using ABS
    • The non abs settings have not been tested and might not work.
  • Once g-code generation is done you're ready to print! (I'll write those instructions later)

http://dl.dropbox.com/u/16139053/replicatorg-0025-lvl1.tar.gz

Modifications

Working on it

  • Z axis wobble
  • Automated Build platform belt wobbles
    • I have no idea maybe a new belt made of thick kapton tape built to a tighter tolerance. covering it with pieces of narrow kapton seems to work for now.

Known Problems

  • extruder motor seized Fixed with http://wiki.makerbot.com/the-great-motor-mystery
  • Power supply died replaced with RMA
  • Z axis wobble It will die
  • Automated Build platform belt wobbles allowing print to move -- this part has been removed until a suitable solution can be devised

Future Ideas

Retrieved from "http://wiki.lvl1.org/index.php?title=Veruca_Gloop&oldid=7876"