Difference between revisions of "Spooky Cat with 2 LEDs"

From LVL1
Jump to navigation Jump to search
m
m
Line 5: Line 5:
 
|arrived=10/6/15
 
|arrived=10/6/15
 
|doesitwork=Yes
 
|doesitwork=Yes
|contact=learn@lvl1.org
+
|contact=learn@lvl1.org (Jared)
 
|where=Main Room
 
|where=Main Room
 
|picture=Spooky Cat.JPG}}
 
|picture=Spooky Cat.JPG}}

Revision as of 21:21, 22 October 2015

[Equipment|Back to list of Equipment]]

Lvl1 qr header.png
Spooky_Cat_with_2_LEDs&.png

General

  • Owner/Loaner: LvL 1
  • Serial Number: N/A
  • Make/Model: N/A
  • Arrival Date: 10/6/15
  • Usability: Yes
  • Contact: learn@lvl1.org (Jared)
  • Where: Main Room
Spooky Cat.JPG


Construction

Spooky Cat was cut out of a scrap of cabinet from the woodshop, which was painted brown on one side and white on the other. The shape was cut using the band saw.

Two white LEDs were hot-glued into eye sockets drilled out of the wood on the drill press.

The LEDs are illuminated with 5v power from the attached USB cable, which was scavenged out of the boneyard.

Current-limiting resistors were calculated using This LED wizard.

Upgrades

  • Spooky Cat now lives on the windowsill above the kitchen.
  • Spooky Cat's eyes are very bright, which is part of why it's so spooky, however, if anyone knows about simple circuits that can variably limit current, that could be applied to either smoothly or discretely dim Spooky Cat's eyes, it would be a helpful Cat upgrade.