Raspberry Pi MagicMirror

From LVL1
Revision as of 14:39, 22 February 2017 by Dpjohn02 (talk | contribs) (Created page with " Materials 1x USB Female to Female 1x MicroSD with adapter 1x Element 10 LCD 1x Element 10 power 1x custom wooden frame 1x document frame with glass (11"x8.5") 1x 12"x12" priv...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Materials 1x USB Female to Female 1x MicroSD with adapter 1x Element 10 LCD 1x Element 10 power 1x custom wooden frame 1x document frame with glass (11"x8.5") 1x 12"x12" privacy mirror film 2x self tapping screw

Supplies Sandpaper (for fitting the glass) Adhesive (for adhering the glass to the frame)

Tools Screw driver with phillips head (to remove screws on Element 10 LCD case Powered drill 1/16" bit for pilot hole



Step 1 Gather your materials and select a work area, each work area should have a screw driver and drill

Step 2 Unpackage the glass from the document frame, discard frame (unless you want to keep it) With your wooden frame

Retrieved from "http://wiki.lvl1.org/index.php?title=Raspberry_Pi_MagicMirror&oldid=9936"