Spooky Cat with 2 LEDs

From LVL1
Revision as of 21:25, 16 October 2015 by Notyou007a (talk | contribs) (Created page with "{{Template:Equipment |owner=LvL 1 |serial=N/A |model=N/A |arrived=10/6/15 |doesitwork=Yes |contact=learn@lvl1.org |where=Main Room |picture= }} =Consturction= Spooky Cat was...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Back to list of Equipment

Spooky_Cat_with_2_LEDs&.png

Equipment Overview

  • Owner/Loaner: LvL 1
  • Serial Number: N/A
  • Make/Model: N/A
  • Arrival Date: 10/6/15
  • Usability: Yes
  • Contact: learn@lvl1.org
  • Where: Main Room

[[File:|x150px|right]]


Consturction

Spooky Cat was cut out of a scrap of cabinet from the woodshop, which was painted brown on one side and white on the other. The shape was cut using the band saw.

Two white LEDs were hot-glued into eye sockets drilled out of the wood on the drill press.

The LEDs are illuminated with 5v power from the attached USB cable, which was scavenged out of the boneyard.

Current-limiting resistors were calculated using This LED wizard.

Retrieved from "http://wiki.lvl1.org/index.php?title=Spooky_Cat_with_2_LEDs&oldid=8501"