Fire Extinguisher

[Equipment|Back to list of Equipment]]

General

Owner/Loaner: LVL1 Serial Number: n/a Make/Model: Kidde Multipurpose Dry Fire Extinguisher Arrival Date: Jul 2010 Usability: Working Contact: lvl1 Where: around the space

Instructions

P.A.S.S.

1. Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and will allow you to discharge the extinguisher.
2. Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.
3. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is released, the discharge will stop.
4. Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish. Be sure to read the instructions on your fire extinguisher - different fire extinguishers recommend operating them from different distances. Remember: Aim at the base of the fire, not at the flames!!!!

Notes

There are two of these fire extinguishers. They should be near the main door and the door to the big room.