Pseudo Medical Monitor Device 3D Print

From LVL1
Revision as of 15:32, 9 December 2021 by JAC 101 (talk | contribs)
Jump to navigation Jump to search
JAC MED MON EEG BOX BRACKETS.jpg
JAC MED MON RESPIRATORY SENSOR BOX.jpg


ATTINY85 TOKEN/NEOPIXEL CONTROLLER/TONE CONTROLLER PARTS
Device Name
JAC MED MON ATTINY85 TOKEN BOX PARTS.jpg
* Enclosure Parts
JAC MED MON CONTROL PANEL BRACKETS.jpg
EXTERNAL UNIT PARTS
Device Name
JAC MED MON PORT MOUNTING BRACKETS.jpg

Respitory Sensor Model A

JAC MED MON RESP MODEL 1 RENDER A.jpg
  • BLUE - Compression Sensor Orientation Stabilizer
  • YELLOW - Compression Sensor Lower Bracket
  • GREEN - Compression Sensor Top Bracket
  • CYAN - Telescoping Tube Cradle
  • RED - Rubber Band (Provides Flexing of Compression Sensor Brackets)
  • VIOLET - Fastner (Holds Exterior Telescoping Tube Secure and Allows Inner Tube to Move)

Respitory Sensor Model B

JAC MED MON RESP MODEL 2 RENDER C.jpg
  • YELLOW - Telescoping Tube Cradle
  • GREEN - Sliding Plunger
  • RED - Rubber Band (Provides Resistance and Recoil for Sliding Plunger against Telescoping Cradle)
  • VIOLET - Reflectance Sensor PCB
  • BLUE - Fastner (Secures Slinging Plunger to Inner Telescoping Tube)
JAC MED MON RESP MODEL 2 RENDER B.jpg


Pseudo-Medical Monitor Device Design

Retrieved from "http://wiki.lvl1.org/index.php?title=Pseudo_Medical_Monitor_Device_3D_Print&oldid=14131"