Craftsman Belt and Disk Sander

From LVL1
Revision as of 15:44, 16 July 2020 by JimD (talk | contribs)
Jump to navigation Jump to search

[Equipment|Back to list of Equipment]]

Lvl1 qr header.png
Craftsman_Belt_and_Disk_Sander&.png

General

  • Owner/Loaner: on loan from member Jim Dallam
  • Serial Number: 12345
  • Make/Model: Sears Craftsman 113.225831 (with legs and motor)
  • Arrival Date: December 10, 2019
  • Usability: yes
  • Contact: Jim.Dallam@gmail.com. cell: 513.300.5164
  • Where: woodshop
CraftsmanBelt&DiskSander.PNG


Usage/Safety

  • General safety instructions for power tools (from this machine's manual)
1. Know your power tool
2. Ground all tools
3. Keep guards in place
  • MIND THE GAP between the table/steady_rest and the rotating sandpaper belt/disk. Have a safe hand and arm exit strategy should the belt pull your stock into the gap.
  • Always wear safety glasses. If you haven’t used this sander before, make practice cuts on scrap softwood stock and then try hardwood scraps.


This equipment uses the following sandpaper belt/disk sizes: 

- 6" x 48" sanding belt
- 9" dia. sanding disk

Here is an Amazon link for 6"x48" sanding belts: https://www.amazon.com/s?k=6+x+48+inch+sanding+belts&dc&crid=2CFQZWKZ91WUA&qid=1576632365&sprefix=6%22x48%22%2Caps%2C188&ref=sr_pg_1

Here is an Amazon link for 9" dia. sanding disks: https://www.amazon.com/s?k=9+inch+diameter+sandpaper+discs&ref=nb_sb_noss

Here is a link for the manual: https://www.manualslib.com/manual/496839/Craftsman-113-225831.html#manual

Retrieved from "http://wiki.lvl1.org/index.php?title=Craftsman_Belt_and_Disk_Sander&oldid=12846"