ShopBot

From LVL1
Revision as of 15:05, 24 August 2025 by Unknown user (talk)
Jump to navigation Jump to search

Back to list of Equipment

ShopBot&.png

Equipment Overview

  • Owner/Loaner: LVL1
  • Serial Number: Serial Number
  • Make/Model: ShopBot PR Standard 48x96
  • Arrival Date: 12/3/2015
  • Usability: Yes
  • Contact: Daniel Johnsen
  • Where: Woodshop


Required Certification

Note: This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders. Do not hack this machine.

Potential users are required to obtain certification and demonstrate proficiency in order to operate this machine.

Certification Trainers Jeff McCord Brandon Johnson Daniel Johnsen Micah "Meesh" Burkhardt Brian Wagner

Trained Individuals

Instructions and How To

How to cut aluminum sheets Cutting_Aluminum_Sheet_On_Shopbot

Technical Details

X and Y limit switches for the shopbot are

  • Baumer Inductive sensor, IFRM 08N37A3/S35L
  • Y Limit Switch replaced 5/7/19 by B Wagner
    • Sensor purchased on ebay for about $50