VCarve Checklist: Difference between revisions
Jump to navigation
Jump to search
→Checklist: update image file types to png |
→Checklist: add missing image references |
||
| Line 20: | Line 20: | ||
| Pass depth(s)/Plunges will not break bit || [[file:pass-depth-graphic.png|thumb]] | | Pass depth(s)/Plunges will not break bit || [[file:pass-depth-graphic.png|thumb]] | ||
|- | |- | ||
| Toolpath has been previewed || [[file:toolpath-preview.png|thumb]] | | Toolpath has been previewed || [[file:toolpath-preview-1.png|thumb]]<br>[[file:toolpath-preview-2.png|thumb]] | ||
|- | |- | ||
| Toolpath has been exported for ShopBot || [[file:toolpath-export-options.png|thumb]] | | Toolpath has been exported for ShopBot || [[file:toolpath-export-options.png|thumb]] <br>[[file:toolpath-export-button.png|thumb]] | ||
|- | |- | ||
| Correct file has been copied to removable media || [[file:toolpath-file-ex.png|thumb]] | | Correct file has been copied to removable media || [[file:toolpath-file-ex.png|thumb]] | ||
|} | |} | ||
Revision as of 21:15, 5 September 2025
Overview
This checklist exists to ensure that a job generated with VCarve will not break your bit, damage the machine, or ruin your material.
For a more detailed introduction to VCarve, see Introduction to VCarve.
Checklist
| Material Setup - Dimensions and thickness are correct. |  |
| Origin is set correctly to center, corner, or table absolute. |  |
| Feed rate, chip load are appropriate to material. |  |
| Cutting depth does not exceed spoilboard. For more, see VCarve Quick Start::Cutting Depth |
 |
| (OPTIONAL) Advanced Path options align with grain of material. | |
| Pass depth(s)/Plunges will not break bit |  |
| Toolpath has been previewed |   |
| Toolpath has been exported for ShopBot |  |
| Correct file has been copied to removable media |
