Revision as of 15:05, 24 August 2025

Owner/Loaner: LVL1
Serial Number: Serial Number
Make/Model: ShopBot PR Standard 48x96
Arrival Date: 12/3/2015
Usability: Yes
Contact: Daniel Johnsen
Where: Woodshop

Equipment Overview

Note: This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders. Do not hack this machine.

Potential users are required to obtain certification and demonstrate proficiency in order to operate this machine.

Certification Trainers Jeff McCord Brandon Johnson Daniel Johnsen Micah "Meesh" Burkhardt Brian Wagner

Trained Individuals

X and Y limit switches for the shopbot are

Y Limit Switch replaced 5/7/19 by B Wagner
- Sensor purchased on ebay for about $50

@@ Line 10: / Line 10: @@
 }}
-= Training =
+= Required Certification =
-Note: Training & sign-off is required to use this machine.  This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders.  Do not hack this machine.
+Note: This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders.  Do not hack this machine.
-Trainers
+Potential users are required to obtain certification and demonstrate proficiency in order to operate this machine.
-Daniel Johnsen, Micah "Meesh" Burkhardt, Brian Wagner
+Certification Trainers
+Jeff McCord
+Brandon Johnson
+Daniel Johnsen
+Micah "Meesh" Burkhardt
+Brian Wagner
 Trained Individuals
@@ Line 23: / Line 29: @@
 = Technical Details =
 X and Y limit switches for the shopbot are
 * Baumer Inductive sensor, IFRM 08N37A3/S35L
 **DataSheet: [https://www.baumer.com/asset/medias/__secure__/IFRM_08N37A3_S35L_web_EN.pdf?mediaPK=8799281545246]