Wakko: Difference between revisions
Jump to navigation
Jump to search
Created page with " {{Template:Equipment |owner=LVL1 |serial=N/A |model=Modified Biqu B1 |arrived=2021 |doesitwork=Yes |contact=Kevin P., Andy M., John C. |where=3D printing area |picture=wiki..." |
No edit summary |
||
| Line 13: | Line 13: | ||
Wakko is a modified Biqu B1. It has been upgraded with a BL Touch, a Big Tree Tech SKR 1.4 Turbo, and Big Tree Tech SKR 2209 Stepper Drivers. It requires custom firmware for the printer. | Wakko is a modified Biqu B1. It has been upgraded with a BL Touch, a Big Tree Tech SKR 1.4 Turbo, and Big Tree Tech SKR 2209 Stepper Drivers. It requires custom firmware for the printer. | ||
Wakko has an X, Y, and Z | Wakko has an X, Y, and Z limit switch and uses them for homing. As opposed to Yakko which uses the bl touch to home the Z | ||
If a stepper driver burns out, the replacement must have the auto-sense homing pin cut off. | If a stepper driver burns out, the replacement must have the auto-sense homing pin cut off. | ||
Latest revision as of 18:51, 17 August 2022
|
|
Equipment Overview
|
|
Wakko is a modified Biqu B1. It has been upgraded with a BL Touch, a Big Tree Tech SKR 1.4 Turbo, and Big Tree Tech SKR 2209 Stepper Drivers. It requires custom firmware for the printer.
Wakko has an X, Y, and Z limit switch and uses them for homing. As opposed to Yakko which uses the bl touch to home the Z
If a stepper driver burns out, the replacement must have the auto-sense homing pin cut off.
Kevin P. Created a zip with a configured marlin source tree and a compiled firmware (firmware.bin): https://drive.google.com/file/d/1gp3Oalr3EDDddR8S_TA8diUQjUzh37LQ/view?usp=sharing