Craftsman Belt and Disk Sander

[Equipment|Back to list of Equipment]]

General

Owner/Loaner: on loan from member Jim Dallam Serial Number: 12345 Make/Model: Sears Craftsman 113.225831 (with legs and motor) Arrival Date: December 10, 2019 Usability: yes Contact: Jim.Dallam@gmail.com. cell: 513.300.5164 Where: woodshop

Usage/Safety

• This belt and disk sander is a relatively safe tool, but the motor is strong enough and the sandpaper coarse enough to chew your finger in a fraction of a second.

• MIND THE GAP between the table/steady_rest and the rotating sandpaper belt/disk. Have a safe hand and arm exit strategy should the belt pull your stock into the gap.

• Always wear safety glasses. If you haven’t used this sander before, make practice cuts on scrap softwood stock and then try hardwood scraps.

This equipment uses the following sandpaper belt/disk sizes:

- 6" x 48" sanding belt
- 9" dia. sanding disk

Here is an Amazon link for 6"x48" sanding belts: https://www.amazon.com/s?k=6+x+48+inch+sanding+belts&dc&crid=2CFQZWKZ91WUA&qid=1576632365&sprefix=6%22x48%22%2Caps%2C188&ref=sr_pg_1

Here is an Amazon link for 9" dia. sanding disks: https://www.amazon.com/s?k=9+inch+diameter+sandpaper+discs&ref=nb_sb_noss

Here is a link for the manual: https://www.manualslib.com/manual/496839/Craftsman-113-225831.html#manual