Veruca Gloop: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template:Equipment}}<br> | |||
__NOTOC__ | __NOTOC__ | ||
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 | Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 | ||
| Line 47: | Line 48: | ||
* '''Print wireless using bluetooth''' http://wiki.makerbot.com/bluetooth-communication | * '''Print wireless using bluetooth''' http://wiki.makerbot.com/bluetooth-communication | ||
* '''Making our own filament''' http://hackaday.com/2010/08/05/recyclebot-digests-milk-jugs-to-feed-makerbot/ | * '''Making our own filament''' http://hackaday.com/2010/08/05/recyclebot-digests-milk-jugs-to-feed-makerbot/ | ||
Revision as of 15:29, 25 November 2010
|
|
Equipment Overview
|
 |
Makerbot Cupcake CNC 2230 Raised from the boxes and to life October 16, 2010 featuring
- Audrey 2 Mark 5 Extruder head
Specifications
- Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
- X/Y Positioning Resolution: 0.085mm
- Z Positioning Resolution: 3.125 microns
- Maximum X/Y Feed rate: 5000mm/minute
- Maximum Z Feed rate: 200mm/minute
- Typical Z-layer height: 0.3725mm
- Outside measurements: 350mm x 240mm x 450mm
Printer settings
Unzip these settings and put them into here:
- on mac put them here : /Applications/replicatorg-0021-mac/skein_engines/skeinforge-31/skeinforge_application/prefs
- on Winders :
- on linux :
From Tim
- Layer height .32 width/thicknes ratio 1.6 http://dl.dropbox.com/u/253442/L32WT16.zip
From twotimes[1]
Modifications
- Z axis crank http://www.thingiverse.com/thing:975
- Y axis belt tensioner http://www.thingiverse.com/thing:1618
- Z axis wobble arrester http://www.thingiverse.com/thing:3057
Working on it
- Z axis wobble
- http://www.thingiverse.com/thing:2151
- everything is printed and shafts are in
- parts are installed needs to be tweaked
- Automated Build platform belt wobbles
- I have no idea maybe a new belt made of thick kapton tape built to a tighter tolerance. covering it with pieces of narrow kapton seems to work for now.
Known Problems
extruder motor seizedFixed with http://wiki.makerbot.com/the-great-motor-mysteryPower supply diedreplaced with RMA- Z axis wobble It will die
- Automated Build platform belt wobbles allowing print to move
Future Ideas
- Print wireless using bluetooth http://wiki.makerbot.com/bluetooth-communication
- Making our own filament http://hackaday.com/2010/08/05/recyclebot-digests-milk-jugs-to-feed-makerbot/