Difference between revisions of "KeyLessEntry"

From LVL1
Jump to navigation Jump to search
Line 8: Line 8:
 
|where= Main Entrance
 
|where= Main Entrance
 
}}
 
}}
 +
 +
==How To Use==
 +
 +
*To Unlock the door
 +
**Place badge near reader until 3 beeps are heard
 +
**Enter your 4 digit pin followed by the # key
 +
**You should hear the door unlatch
 +
 +
*To Unlock the Door for X hours
 +
**Place badge near reader until 3 beeps are heard
 +
**Enter your 4 digit pin followed by the # key
 +
**Press 1 followed by the # key
 +
 +
**Enter the number of hours followed by the # key
 +
***Note you can only unlock the door for up to 8 hours
 +
 +
*To Lock the Door
 +
**Place badge near reader until 3 beeps are heard
 +
**Enter your 4 digit pin followed by the # key
 +
**Press 2 followed by the # key
 +
**You will hear the system beep once a second for about 10 secs then lock
 +
 +
*To Toggle the State of the Garage Door
 +
**Place badge near reader until 3 beeps are heard
 +
**Enter your 4 digit pin followed by the # key
 +
**Press 3 followed by the # key
 +
**The garage door will then change state (e.g. If open then will close)

Revision as of 12:13, 10 January 2012

[Equipment|Back to list of Equipment]]

Lvl1 qr header.png
KeyLessEntry&.png

General

  • Owner/Loaner: LVL1
  • Serial Number:
  • Make/Model:
  • Arrival Date:
  • Usability: Currently Works (12/17/11)
  • Contact: Tyler Martin
  • Where: Main Entrance
No image.JPG


How To Use

  • To Unlock the door
    • Place badge near reader until 3 beeps are heard
    • Enter your 4 digit pin followed by the # key
    • You should hear the door unlatch
  • To Unlock the Door for X hours
**Place badge near reader until 3 beeps are heard
**Enter your 4 digit pin followed by the # key
**Press 1 followed by the # key

    • Enter the number of hours followed by the # key
      • Note you can only unlock the door for up to 8 hours
  • To Lock the Door
    • Place badge near reader until 3 beeps are heard
    • Enter your 4 digit pin followed by the # key
    • Press 2 followed by the # key
    • You will hear the system beep once a second for about 10 secs then lock
  • To Toggle the State of the Garage Door
    • Place badge near reader until 3 beeps are heard
    • Enter your 4 digit pin followed by the # key
    • Press 3 followed by the # key
    • The garage door will then change state (e.g. If open then will close)