VCarve Checklist - Details: Difference between revisions
Jump to navigation
Jump to search
initial page setup |
add material setup |
||
| Line 6: | Line 6: | ||
= Checklist Explanations = | = Checklist Explanations = | ||
==Job Setup== | == Job Setup == | ||
===Material Setup=== | Creating a new job in VCarve will open the ''Job Setup'' form. The options listed here will define the cutting material that you will affix to the ShopBot's spoilboard. | ||
=== Material Setup === | |||
*''Size'': enter material lengths along the x- and y-axis | |||
*''Z Zero'': selects whether material or table surface is set as Z = 0.0 | |||
*''Thickness'': enter material thickness of your material along the z-axis | |||
=== Origin === | === Origin === | ||
==Tool Setup== | ==Tool Setup== | ||
Revision as of 18:23, 8 September 2025
Overview
This document provides detailed explanations for the steps provided in VCarve Checklist. Click the backlinks in each section to return to the associated checklist item.
Todos
- Add video links & link to PDF section / written explanations
Checklist Explanations
Job Setup
Creating a new job in VCarve will open the Job Setup form. The options listed here will define the cutting material that you will affix to the ShopBot's spoilboard.
Material Setup
- Size: enter material lengths along the x- and y-axis
- Z Zero: selects whether material or table surface is set as Z = 0.0
- Thickness: enter material thickness of your material along the z-axis