Pseudo-Medical Monitor Code CONFIGURATION STUFF

char * I2C_Device_Name(int I2C_Bus, byte I2C_Address)
{
  switch(I2C_Address)
    {
      case 0x26:
        if (I2C_Bus == 0)
          return("????");          
        if (I2C_Bus == 1)
          return("ECG w/ NPXL");      
        break;
      case 0x29:
        return("VL53L0X");
        break;
      case 0x57:
        return("MAX30102");
        break;
      case 0x5A:
        return("MLX9164");
        break;
      case 0x68:
        if (I2C_Bus == 0)
          return("????");
        if (I2C_Bus  1)
          return("MPU6050 R");
        break;
      case 0x69:
        if (I2C_Bus == 0)
          return("AMG8833");
        if (I2C_Bus == 1)
          return("MPU6050 G");          
        break;
      case 0x70:
        return("TCA9548A");  
      case 0x38:
        return("PCF8574");
        break;  
      default:
        return("????");
        break;          
    }
}

int CNFG_x_offset = 0;
int CNFG_y_offset = 0;
int CNFG_x_width = 128;
int CNFG_y_height = 160;

void ConfigurationMainUnit()
{
  byte comm_error, address;
  int nDevices;

  int box_top = CNFG_y_offset;
  int box_bottom = box_top + CNFG_y_height;
  
  int box_left = CNFG_x_offset;
  int box_right = box_left + CNFG_x_width;
  
  int box_width = CNFG_x_width;
  int box_height = CNFG_y_height;

  int I2C_text_y_offset = 20;
  int text_x_offset = 5;
  int text_y_offset = 10;
  int text_y_spacing = 8;

  char I2CLabel[16]="--------------";
  
  DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_BLUE,COMMON_WHITE); 
  DrawScreenText(box_left+20,box_top+4,"Main Unit",COMMON_YELLOW,COMMON_BLUE);

  DrawScreenText(box_left+10,I2C_text_y_offset,"I2C Scan...",COMMON_YELLOW,COMMON_BLUE);
  DrawScreenText(box_left+10,box_top+I2C_text_y_offset+8,"HEX",COMMON_YELLOW,COMMON_BLUE);
  DrawScreenText(box_left+40,box_top+I2C_text_y_offset+8,"Device",COMMON_YELLOW,COMMON_BLUE);
  
  Serial.println("Scanning...");
   
  nDevices = 0;
  for(address = 1; address < 127; address++ ) 
    {
      Wire.beginTransmission(address);
      comm_error = Wire.endTransmission();
      if (comm_error == 0) 
        {          
          nDevices++;
          Serial.print("I2C device found at address 0x");
          if (address<16) 
            {
              Serial.print("0");
            }
          DrawScreenText(box_left+10,box_top+I2C_text_y_offset+16+(nDevices*8),String(address,HEX),COMMON_YELLOW,COMMON_BLUE);            
          Serial.println(address,HEX);
          DrawScreenText(box_left+40,box_top+I2C_text_y_offset+16+(nDevices*8),I2C_Device_Name(0, address),COMMON_YELLOW,COMMON_BLUE);                      
        }
       else 
        if (comm_error  == 4) 
          {
            Serial.print("Unknown error at address 0x");
            if (address<16) 
              {
                Serial.print("0");
              }
            Serial.println(address,HEX);
          }    
    }
  if (nDevices  0) 
    {
      Serial.println("No I2C devices found!\n");
    }
   else 
    {
      Serial.println("done\n");
    }    
}



 

Pseudo-Medical_Monitor_Code#Custom_Includes