Craftsman Belt and Disk Sander: Difference between revisions

From LVL1
Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 13: Line 13:
   
   
* General safety instructions for power tools (from this machine's manual)
* General safety instructions for power tools (from this machine's manual)
01. Know your power tool (read and understand the owner's manual before using.  Understand specific hazards.
** 01. Know your power tool (read and understand the owner's manual before using.  Understand specific hazards.
02. Ground all tools (use gronded 3-prong plug to proper grounding type receptacle.
** 02. Ground all tools (use gronded 3-prong plug to proper grounding type receptacle.
03. Keep guards in place (in working order with proper adjustment and alignment
** 03. Keep guards in place (in working order with proper adjustment and alignment
04. Remove adjusting keys and wrenches (form habit to check they are removed from tool before turning on.
** 04. Remove adjusting keys and wrenches (form habit to check they are removed from tool before turning on.
05. Keep work area clean
** 05. Keep work area clean
06. Avoid dangerous environment
** 06. Avoid dangerous environment
07. Keep children away
** 07. Keep children away
08. Make workshop kid-proof
** 08. Make workshop kid-proof
09. Dont force tool
** 09. Dont force tool
10. Use right tool
** 10. Use right tool
11. Wear proper apparel  
** 11. Wear proper apparel  
12. Use safety goggles (head protection)
** 12. Use safety goggles (head protection)
13. Secure work
** 13. Secure work
14. Don't overreach
** 14. Don't overreach
15. Maintain tools with care
** 15. Maintain tools with care
16. Disconnect tools
** 16. Disconnect tools
17. Avoid accidental starting
** 17. Avoid accidental starting
18. Use recommended accessories
** 18. Use recommended accessories
19. Never stand on tool
** 19. Never stand on tool
20. Check damaged parts
** 20. Check damaged parts
21. Direction of feed
** 21. Direction of feed
22. Never leave tool running unattended
** 22. Never leave tool running unattended




Revision as of 15:52, 16 July 2020

Back to list of Equipment

Craftsman_Belt_and_Disk_Sander&.png

Equipment Overview

  • Owner/Loaner: on loan from member Jim Dallam
  • Serial Number: 12345
  • Make/Model: Sears Craftsman 113.225831 (with legs and motor)
  • Arrival Date: December 10, 2019
  • Usability: yes
  • Contact: Jim.Dallam@gmail.com. cell: 513.300.5164
  • Where: woodshop


Usage/Safety

  • General safety instructions for power tools (from this machine's manual)
    • 01. Know your power tool (read and understand the owner's manual before using. Understand specific hazards.
    • 02. Ground all tools (use gronded 3-prong plug to proper grounding type receptacle.
    • 03. Keep guards in place (in working order with proper adjustment and alignment
    • 04. Remove adjusting keys and wrenches (form habit to check they are removed from tool before turning on.
    • 05. Keep work area clean
    • 06. Avoid dangerous environment
    • 07. Keep children away
    • 08. Make workshop kid-proof
    • 09. Dont force tool
    • 10. Use right tool
    • 11. Wear proper apparel
    • 12. Use safety goggles (head protection)
    • 13. Secure work
    • 14. Don't overreach
    • 15. Maintain tools with care
    • 16. Disconnect tools
    • 17. Avoid accidental starting
    • 18. Use recommended accessories
    • 19. Never stand on tool
    • 20. Check damaged parts
    • 21. Direction of feed
    • 22. Never leave tool running unattended





  • MIND THE GAP between the table/steady_rest and the rotating sandpaper belt/disk. Have a safe hand and arm exit strategy should the belt pull your stock into the gap.
  • Always wear safety glasses. If you haven’t used this sander before, make practice cuts on scrap softwood stock and then try hardwood scraps.


This equipment uses the following sandpaper belt/disk sizes: 

- 6" x 48" sanding belt
- 9" dia. sanding disk

Here is an Amazon link for 6"x48" sanding belts: https://www.amazon.com/s?k=6+x+48+inch+sanding+belts&dc&crid=2CFQZWKZ91WUA&qid=1576632365&sprefix=6%22x48%22%2Caps%2C188&ref=sr_pg_1

Here is an Amazon link for 9" dia. sanding disks: https://www.amazon.com/s?k=9+inch+diameter+sandpaper+discs&ref=nb_sb_noss

Here is a link for the manual: https://www.manualslib.com/manual/496839/Craftsman-113-225831.html#manual

Retrieved from "http://wiki.lvl1.org/index.php?title=Craftsman_Belt_and_Disk_Sander&oldid=12848"