|
|
| (3 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
|
| |
| <nowiki>
| |
|
| |
|
| char * I2C_Device_Name(int I2C_Bus, byte I2C_Address)
| |
| {
| |
| switch(I2C_Address)
| |
| {
| |
| case 0x26:
| |
| if (I2C_Bus == 0)
| |
| return("????");
| |
| if (I2C_Bus == 1)
| |
| return("ECG w/ NPXL");
| |
| break;
| |
| case 0x29:
| |
| return("VL53L0X");
| |
| break;
| |
| case 0x57:
| |
| return("MAX30102");
| |
| break;
| |
| case 0x5A:
| |
| return("MLX9164");
| |
| break;
| |
| case 0x68:
| |
| if (I2C_Bus == 0)
| |
| return("????");
| |
| if (I2C_Bus 1)
| |
| return("MPU6050 R");
| |
| break;
| |
| case 0x69:
| |
| if (I2C_Bus == 0)
| |
| return("AMG8833");
| |
| if (I2C_Bus == 1)
| |
| return("MPU6050 G");
| |
| break;
| |
| case 0x70:
| |
| return("TCA9548A");
| |
| case 0x38:
| |
| return("PCF8574");
| |
| break;
| |
| default:
| |
| return("????");
| |
| break;
| |
| }
| |
| }
| |
|
| |
| int CNFG_x_offset = 0;
| |
| int CNFG_y_offset = 0;
| |
| int CNFG_x_width = 128;
| |
| int CNFG_y_height = 160;
| |
|
| |
| void ConfigurationMainUnit()
| |
| {
| |
| byte comm_error, address;
| |
| int nDevices;
| |
|
| |
| int box_top = CNFG_y_offset;
| |
| int box_bottom = box_top + CNFG_y_height;
| |
|
| |
| int box_left = CNFG_x_offset;
| |
| int box_right = box_left + CNFG_x_width;
| |
|
| |
| int box_width = CNFG_x_width;
| |
| int box_height = CNFG_y_height;
| |
|
| |
| int I2C_text_y_offset = 20;
| |
| int text_x_offset = 5;
| |
| int text_y_offset = 10;
| |
| int text_y_spacing = 8;
| |
|
| |
| char I2CLabel[16]="--------------";
| |
|
| |
| DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_BLUE,COMMON_WHITE);
| |
| DrawScreenText(box_left+20,box_top+4,"Main Unit",COMMON_YELLOW,COMMON_BLUE);
| |
|
| |
| DrawScreenText(box_left+10,I2C_text_y_offset,"I2C Scan...",COMMON_YELLOW,COMMON_BLUE);
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+8,"HEX",COMMON_YELLOW,COMMON_BLUE);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+8,"Device",COMMON_YELLOW,COMMON_BLUE);
| |
|
| |
| Serial.println("Scanning...");
| |
|
| |
| nDevices = 0;
| |
| for(address = 1; address < 127; address++ )
| |
| {
| |
| Wire.beginTransmission(address);
| |
| comm_error = Wire.endTransmission();
| |
| if (comm_error == 0)
| |
| {
| |
| nDevices++;
| |
| Serial.print("I2C device found at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+16+(nDevices*8),String(address,HEX),COMMON_YELLOW,COMMON_BLUE);
| |
| Serial.println(address,HEX);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+16+(nDevices*8),I2C_Device_Name(0, address),COMMON_YELLOW,COMMON_BLUE);
| |
| }
| |
| else
| |
| if (comm_error == 4)
| |
| {
| |
| Serial.print("Unknown error at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| Serial.println(address,HEX);
| |
| }
| |
| }
| |
| if (nDevices == 0)
| |
| {
| |
| Serial.println("No I2C devices found!\n");
| |
| }
| |
| else
| |
| {
| |
| Serial.println("done\n");
| |
| }
| |
| }
| |
|
| |
| void ConfigurationPort(int port_selection)
| |
| {
| |
| byte comm_error, address;
| |
| int nDevices;
| |
|
| |
| int box_top = CNFG_y_offset;
| |
| int box_bottom = box_top + CNFG_y_height;
| |
|
| |
| int box_left = CNFG_x_offset;
| |
| int box_right = box_left + CNFG_x_width;
| |
|
| |
| int box_width = CNFG_x_width;
| |
| int box_height = CNFG_y_height;
| |
|
| |
| int I2C_text_y_offset = 28;
| |
| int text_x_offset = 5;
| |
| int text_y_offset = 10;
| |
| int text_y_spacing = 8;
| |
|
| |
| char I2CLabel[16]="--------------";
| |
|
| |
| DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_CYAN,COMMON_RED);
| |
| DrawScreenText(box_left+20,box_top+4,"Port "+String(port_selection),COMMON_BLACK,COMMON_CYAN);
| |
| DrawScreenText(box_left+20,box_top+12,Port_Type_Label[Port_Definitions.Port_Type[port_selection]],COMMON_BLACK,COMMON_CYAN);
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset,"I2C Scan...",COMMON_BLACK,COMMON_CYAN);
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+8,"HEX",COMMON_BLACK,COMMON_CYAN);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+8,"Device",COMMON_BLACK,COMMON_CYAN);
| |
|
| |
| Serial.println("Scanning...");
| |
|
| |
| nDevices = 0;
| |
| I2CMux.openChannel(port_selection);
| |
| for(address = 1; address < 127; address++ )
| |
| {
| |
| Wire1.beginTransmission(address);
| |
| comm_error = Wire1.endTransmission();
| |
| if (comm_error == 0)
| |
| {
| |
| nDevices++;
| |
| Serial.print("I2C device found at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+16+(nDevices*8),String(address,HEX),COMMON_BLACK,COMMON_CYAN);
| |
| Serial.println(address,HEX);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+16+(nDevices*8),I2C_Device_Name(1, address),COMMON_BLACK,COMMON_CYAN);
| |
| }
| |
| else
| |
| if (comm_error==4)
| |
| {
| |
| Serial.print("Unknown error at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| Serial.println(address,HEX);
| |
| }
| |
| }
| |
| if (nDevices == 0)
| |
| {
| |
| Serial.println("No I2C devices found!\n");
| |
| }
| |
| else
| |
| {
| |
| Serial.println("done\n");
| |
| }
| |
| I2CMux.closeChannel(port_selection);
| |
| }
| |
|
| |
| void ConfigurationScans()
| |
| {
| |
| int configuration_select = 0;
| |
| bool refresh_screen = true;
| |
| int encoder_A = 0;
| |
| int encoder_B = 0;
| |
|
| |
| while(configuration_select != -1)
| |
| {
| |
| switch(configuration_select)
| |
| {
| |
| case 0:
| |
| if (refresh_screen)
| |
| {
| |
| ConfigurationMainUnit();
| |
| Controls.reset_All();
| |
| }
| |
| refresh_screen = false;
| |
| break;
| |
| case 1:
| |
| if (refresh_screen)
| |
| ConfigurationPort(0);
| |
| refresh_screen = false;
| |
| break;
| |
| case 2:
| |
| if (refresh_screen)
| |
| ConfigurationPort(1);
| |
| refresh_screen = false;
| |
| break;
| |
| case 3:
| |
| if (refresh_screen)
| |
| ConfigurationPort(2);
| |
| refresh_screen = false;
| |
| break;
| |
| case 4:
| |
| if (refresh_screen)
| |
| ConfigurationPort(3);
| |
| refresh_screen = false;
| |
| break;
| |
| }
| |
|
| |
| if (Controls.pcf_event)
| |
| {
| |
| encoder_A = Controls.encoder_A_Dir();
| |
| encoder_B = Controls.encoder_B_Dir();
| |
| if (encoder_B == 1)
| |
| {
| |
| if (configuration_select < 4)
| |
| ++configuration_select;
| |
| refresh_screen = true;
| |
| }
| |
| if (encoder_B == -1)
| |
| {
| |
| if (configuration_select > 0)
| |
| --configuration_select;
| |
| refresh_screen = true;
| |
| }
| |
|
| |
| if (Controls.encoder_A_Switch() 1)
| |
| {
| |
| configuration_select = -1;
| |
| }
| |
| Controls.pcf_event = false; // Cleans the interrupt status
| |
| delay(20);
| |
| }
| |
| }
| |
| }
| |
|
| |
| </nowiki>
| |
|
| |
| [[Pseudo-Medical_Monitor_Code#Custom_Includes]]
| |