|
|
| (4 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
|
| |
| <nowiki>
| |
|
| |
|
| char * I2C_Device_Name(int I2C_Bus, byte I2C_Address)
| |
| {
| |
| switch(I2C_Address)
| |
| {
| |
| case 0x26:
| |
| if (I2C_Bus == 0)
| |
| return("????");
| |
| if (I2C_Bus == 1)
| |
| return("ECG w/ NPXL");
| |
| break;
| |
| case 0x29:
| |
| return("VL53L0X");
| |
| break;
| |
| case 0x57:
| |
| return("MAX30102");
| |
| break;
| |
| case 0x5A:
| |
| return("MLX9164");
| |
| break;
| |
| case 0x68:
| |
| if (I2C_Bus == 0)
| |
| return("????");
| |
| if (I2C_Bus 1)
| |
| return("MPU6050 R");
| |
| break;
| |
| case 0x69:
| |
| if (I2C_Bus == 0)
| |
| return("AMG8833");
| |
| if (I2C_Bus == 1)
| |
| return("MPU6050 G");
| |
| break;
| |
| case 0x70:
| |
| return("TCA9548A");
| |
| case 0x38:
| |
| return("PCF8574");
| |
| break;
| |
| default:
| |
| return("????");
| |
| break;
| |
| }
| |
| }
| |
|
| |
| int CNFG_x_offset = 0;
| |
| int CNFG_y_offset = 0;
| |
| int CNFG_x_width = 128;
| |
| int CNFG_y_height = 160;
| |
|
| |
| void ConfigurationMainUnit()
| |
| {
| |
| byte comm_error, address;
| |
| int nDevices;
| |
|
| |
| int box_top = CNFG_y_offset;
| |
| int box_bottom = box_top + CNFG_y_height;
| |
|
| |
| int box_left = CNFG_x_offset;
| |
| int box_right = box_left + CNFG_x_width;
| |
|
| |
| int box_width = CNFG_x_width;
| |
| int box_height = CNFG_y_height;
| |
|
| |
| int I2C_text_y_offset = 20;
| |
| int text_x_offset = 5;
| |
| int text_y_offset = 10;
| |
| int text_y_spacing = 8;
| |
|
| |
| char I2CLabel[16]="--------------";
| |
|
| |
| DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_BLUE,COMMON_WHITE);
| |
| DrawScreenText(box_left+20,box_top+4,"Main Unit",COMMON_YELLOW,COMMON_BLUE);
| |
|
| |
| DrawScreenText(box_left+10,I2C_text_y_offset,"I2C Scan...",COMMON_YELLOW,COMMON_BLUE);
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+8,"HEX",COMMON_YELLOW,COMMON_BLUE);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+8,"Device",COMMON_YELLOW,COMMON_BLUE);
| |
|
| |
| Serial.println("Scanning...");
| |
|
| |
| nDevices = 0;
| |
| for(address = 1; address < 127; address++ )
| |
| {
| |
| Wire.beginTransmission(address);
| |
| comm_error = Wire.endTransmission();
| |
| if (comm_error == 0)
| |
| {
| |
| nDevices++;
| |
| Serial.print("I2C device found at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| DrawScreenText(box_left+10,box_top+I2C_text_y_offset+16+(nDevices*8),String(address,HEX),COMMON_YELLOW,COMMON_BLUE);
| |
| Serial.println(address,HEX);
| |
| DrawScreenText(box_left+40,box_top+I2C_text_y_offset+16+(nDevices*8),I2C_Device_Name(0, address),COMMON_YELLOW,COMMON_BLUE);
| |
| }
| |
| else
| |
| if (comm_error == 4)
| |
| {
| |
| Serial.print("Unknown error at address 0x");
| |
| if (address<16)
| |
| {
| |
| Serial.print("0");
| |
| }
| |
| Serial.println(address,HEX);
| |
| }
| |
| }
| |
| if (nDevices 0)
| |
| {
| |
| Serial.println("No I2C devices found!\n");
| |
| }
| |
| else
| |
| {
| |
| Serial.println("done\n");
| |
| }
| |
| }
| |
|
| |
|
| |
|
| |
| </nowiki>
| |
|
| |
| [[Pseudo-Medical_Monitor_Code#Custom_Includes]]
| |