NeoPixel Web Server

Instructions

1. Install Arduino IDE software. Not the web one. https://www.arduino.cc/en/Main/Software

2. Install the NodeMCU software using the instructions on this page https://randomnerdtutorials.com/how-to-install-esp8266-board-arduino-ide/

3. Install the FASTLED library Arduino->sketch->include library->manage libraries Search for FASTLED and install

4. Download the arduino software for the fastled webserver https://github.com/jasoncoon/esp8266-fastled-webserver

• Click clone or download and download the zip. Put this zip file on your desktop or in the documents folder
• Right click to unzip the software

5. Navigate to the folder and run the esp8266-fastled-webserver.ino file

6. Edit this file above to be like this

#include "FSBrowser.h"

#define DATA_PIN      5 //LVL1 change this!  This is D5
#define LED_TYPE      WS2811
#define COLOR_ORDER   RGB
#define NUM_LEDS      30 //change this!

#define MILLI_AMPS         2000 // IMPORTANT: set the max milli-Amps of your power supply (4A = 4000mA)
#define FRAMES_PER_SECOND  120  // here you can control the speed. With the Access Point / Web Server the animations run a bit slower.

//LVL1 change this to true!
const bool apMode = true;

//LVL1 Comment this secrets.h
//#include "Secrets.h" // this file is intentionally not included in the sketch, so nobody accidentally commits their secret information.
// create a Secrets.h file with the following:

// AP mode password
//LVL1 uncomment this!
const char WiFiAPPSK[] = "your-password";

// Wi-Fi network to connect to (if not in AP mode)
//LVL1 uncomment this!
char* ssid = "your-ssid";
char* password = "your-password";

7. The web app needs to be uploaded to the ESP8266's SPIFFS. You can do this within the Arduino IDE after installing the Arduino ESP8266FS tool. http://esp8266.github.io/Arduino/versions/2.3.0/doc/filesystem.html#uploading-files-to-file-system With ESP8266FS installed upload the web app using ESP8266 Sketch Data Upload command in the Arduino Tools menu.