View source for Yakko


{{Template:Equipment
|owner=LVL1
|serial=N/A
|model=Make/Model of equipment
|arrived=2021
|doesitwork=Yes
|contact=Kevin P., Andy M., John C. 
|where=3D printing area. 
|picture=wiki URL
}}

Yakko is a modified Biqu B1 3d printer. It has been upgraded with a BL touch, a Big Tree Tech SKR v1.4 Turbo, and Big Tree Tech 2209 Stepper Drivers. 

It has an x and y limit switch, and uses the BL touch for homing Z, as opposed to Wakko, which has three limit switches. 

Kevin P. Has created a zip of the firmware source and the compiled firmware (firmware.bin)
https://drive.google.com/file/d/1XtgJIxsc-F3O9Ni5kWbBElxOUazaYI6l/view?usp=sharing