Digital for Arduino

From LVL1
Jump to navigation Jump to search
Digital.png

Digital electronics for Arduino Workshop. Taught and designed by Brian Wagner.

SIGN UP HERE http://digitalarduino.eventbrite.com

We will build and program an electronic game and in the process learn LED's, tri-color LED's, pushbutton switches, speakers and Arduino programming.


You must bring your own Arduino or clone!


You will need to have an Arduino or an Arduino clone to participate in this workshop. They can be purchased online (but be aware of shipping times) or at a local Radio shack http://www.radioshack.com/product/index.jsp?productId=12268262 You will need to have a USB cable to connect to your computer.


Other Arduino retailers

Adafruit http://www.adafruit.com/products/50

Sparkfun http://www.sparkfun.com/products/9950

Solarbotics (Canada - can have slower shipping) http://www.solarbotics.com/products/28920/

Seeed studios http://www.seeedstudio.com/depot/seeeduino-v30-atmega-328p-p-669.html?cPath=132_133 Cheapest around, but they come from HK so they take a while to get.

Again, do not forget the USB cable

You can also use a serial based Arduino such as the Diavolina ($13!!!), but you need a $20 cable! http://evilmadscience.com/productsmenu/tinykitlist/180


You will also need to bring a laptop computer for programming your Arduino. We will show you how!


All other supplies are included in the cost of the workshop (wire, leds, switch, solderless breadboard, speaker, etc)


LVL1 has snacks and sodas available for purchase, but you can bring your own if you want.


Here is the Poster so you can print and hang in your favorite coffee shop. File:Digital.pdf


The Class

As we work through the parts below, do not remove the parts as you go. I have set this up so that by the end, the whole circuit game is built! I have taken parts of a couple of other classes to create this class. For the most part, the code is the same, but sometimes I had to rewire the circuit so the code has changed. I have posted the changes.

Part 1

Install the Arduino software and get your development system going

http://wiki.lvl1.org/1st_Inning


Part 2

Blinky Light - Get one LED blinking

http://wiki.lvl1.org/2nd_Inning


Part 3

Cylon lights - Battlestar Galactica or KITT - take your pick

http://wiki.lvl1.org/Cylon_LEDs


Part 4

Tri-Color LED

http://wiki.lvl1.org/3rd_Inning


Part 4

Push Button Switch

http://wiki.lvl1.org/5th_Inning


Part 5

Speaker - Lets make some noise

http://wiki.lvl1.org/9th_Inning


Part 6

Put it all together and make a game