Graphtec Vinyl Cutter
Basic Info
- Located upstairs
- ...
Using with Linux
- Hook up to USB
- Install printer in CUPS
- Choose Raw Queue as driver
- Maker sure plotter is in HG-GL mode
- Hit pause
- Page Next until you see command
- Enter
- Arrow over to HG-GL
- The best way to plot in Linux is with the Inkscape plugin, InkCut
- Install inkscape
- Download InkCut here:
http://inkcut.sourceforge.net/
mv InkCut-1.0.tar.gz ~/.config/inkscape/extensions/ cd ~/.config/inkscape/extensions/ tar -xf InkCut-1.0.tar.gz
- start Inkscape
- draw something to print
- make sure it is a path
- select it
- Extensions -> Cutting/Plotting -> InkCut