Difference between revisions of "Magic 8 of Hearts"
Jump to navigation
Jump to search
| Line 42: | Line 42: | ||
[[File:M8H_Heart_Board_Empty.jpg]] | [[File:M8H_Heart_Board_Empty.jpg]] | ||
| + | |||
| + | ==Layout the Board== | ||
| + | |||
| + | After several tries, the components are placed on the board. | ||
| + | |||
| + | [[File:M8H_Board_Layout_Final.jpg]] | ||
Revision as of 22:29, 11 February 2016
Components
This project consists of the following parts.
| Arduino Nano | PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+ |
| White LEDs | Inductive Charging Set - 5V @ 500mA max |
| 1.44" 128*128 TFT LCD SPI | 3.7v 650mah Li-po Battery |
| MMA7361LC 3-Axis Accelerometer ±1.5/6g | FQP30N06L MOSFET |
| Perf Board | Split Heart |
| Not Shown | |
| 49 ohms resister (LED) | 150 ohms resister (LCD Backlight) |
| Reed Switch | 12k ohms resister (MOSFET Limiter) |
Prepare The Heart
Make a hole in the heart.
Make a insertable Perf Board
Layout the Board
After several tries, the components are placed on the board.
