From LVL1
Revision as of 08:12, 8 May 2019 by Bpwagner (talk | contribs) (→‎Instructions and How To)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Back to list of Equipment

Lvl1 qr header.png


  • Owner/Loaner: LVL1
  • Serial Number: Serial Number
  • Make/Model: ShopBot PR Standard 48x96
  • Arrival Date: 12/3/2015
  • Usability: Yes
  • Contact: Daniel Johnsen
  • Where: Woodshop
DSC 7286.JPG

Note: Training & sign-off is required to use this machine. This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders. Do not hack this machine.

Trainers Daniel Johnsen, Micah "Meesh" Burkhardt, Brian Wagner, Tim VanSant

Trained Individuals

Instructions and How To

How to cut aluminum sheets Cutting_Aluminum_Sheet_On_Shopbot

X and Y limit switches for the shopbot are

Baumer Inductive sensor IFRM 08N37A3/S35L . DataSheet: [1]

Y Limit Switch replaced 5/7/19 by B Wagner Sensor purchased on ebay for about $50