Difference between revisions of "RFID"

From LVL1
Jump to navigation Jump to search
(Created page with "'''IT IS YOUR RESPONSIBILITY TO ENSURE THE SECURITY OF LVL1! ALWAYS MAKE SURE THE SPACE IS SECURE IF YOU'RE THE LAST ONE OUT.''' = How to get in the front door = # Scan your...")
 
Line 4: Line 4:
  
 
# Scan your RFID Card
 
# Scan your RFID Card
# While the door is beeping, pull the door open.  Allow it to close behind you before the reader stops beeping.
+
# Open the door within 10 seconds of the RFID reader beeping
 
# Test the door to ensure it locked behind you
 
# Test the door to ensure it locked behind you
  
 
= How to get out the front door =
 
= How to get out the front door =
  
# Wave your hand in front of the "Push to Exit" button (it isn't a button, really).
+
# Turn the handle, open the door
# While the door is beeping, push the door open. Allow it to close behind you before the reader stops beeping.
 
 
# Test the door to ensure it locked behind you
 
# Test the door to ensure it locked behind you
  

Revision as of 20:02, 8 October 2014

IT IS YOUR RESPONSIBILITY TO ENSURE THE SECURITY OF LVL1! ALWAYS MAKE SURE THE SPACE IS SECURE IF YOU'RE THE LAST ONE OUT.

How to get in the front door

  1. Scan your RFID Card
  2. Open the door within 10 seconds of the RFID reader beeping
  3. Test the door to ensure it locked behind you

How to get out the front door

  1. Turn the handle, open the door
  2. Test the door to ensure it locked behind you

FRONT DOOR EMERGENCY, IT WON'T LOCK AND I NEED TO LEAVE

  1. Lock the deadbolt
  2. Send an email to broken@lvl1.org

How to get in the side door

  1. Scan your RFID Card
  2. Pull the door open

Door information

  • The LVL1 door is using a custom access control system designed by Brad Luyster
  • The door hardware, firmware, and software are open source: https://github.com/Zuph/doar/