Makership Kart Build

From LVL1
Revision as of 12:21, 9 July 2016 by Tiggle (talk | contribs)
Jump to navigation Jump to search

Plan

the goal of this project is to build a gas powered go-kart that can compete in the KYSCCA autocross events at the L-Ville convention center.


Day 0

Friday July 8 Arrived at space with makership approved, plan to start fabrecating frame for kart. Cut side frame rails: 4'2" long 1.5" diameter steel tubing. Found 2.5" tube for the back rail and a 1.575" tube for the front rail. Got sidetracked building battleship frame


Day 1

Saturday July 9 began welding frame using a tubeular template generator to notch out the metal.