From LVL1
Revision as of 15:44, 7 February 2018 by PatrickJ (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


The classroom is adjacent to the Main Room and is accessible through the single door near the 3D printers.


There are sufficient table workspaces for approximately 20-30 people to work, depending on their projects. There is an instructor/lecturer's desk with a PC in one corner. There is a white board on one wall. The library is located here, as well. Normally, the Hakko soldering stations are stored in the classroom just inside the main door.


Members have provided art for the classroom - all of it is to be considered on loan only. DO NOT HACK THE ART!

Back to Space