Difference between revisions of "APS GF-B Reflow Oven"

From LVL1
Jump to navigation Jump to search
(Created page with "{{Template:Equipment |owner=LVL1 |serial=Serial Number |model=GF-B |arrived=04/22/2016 |doesitwork=Yes |contact=Nathan A. |where=Electronics Workbench |picture=wiki URL }}")
 
Line 9: Line 9:
 
|picture=wiki URL
 
|picture=wiki URL
 
}}
 
}}
 +
 +
= Quick Start Instructions =
 +
* Turn oven switch on (rotate clockwise)
 +
* Turn on oven rocker fan switch
 +
* Press Enter key
 +
* Use arrow keys to navigate to "Work" and press Enter
 +
* Slide conveyor over to one side completely (do not have loaded with PCBs), oven will start
 +
* Let oven heat up to profile's reflow temperature (e.g. 235C), about 30-35 minutes
 +
* Load PCBs on side not inside the oven
 +
* Slide conveyor to other side. PCBs will now be inside the oven.
 +
* Wait for timer to complete its cycle, ~240 seconds or whatever your current profile is set to
 +
* Once cycle is complete, slide the conveyor over again and let boards cool
 +
** Note: if you slide conveyor completely over to one side, the oven will automatically start another cycle. To avoid this, slide oven conveyor to the side partially.
 +
 +
= Manual =
 +
 +
Insert link or pictures here

Revision as of 22:08, 26 April 2016

[Equipment|Back to list of Equipment]]

Lvl1 qr header.png
APS_GF-B_Reflow_Oven&.png

General

  • Owner/Loaner: LVL1
  • Serial Number: Serial Number
  • Make/Model: GF-B
  • Arrival Date: 04/22/2016
  • Usability: Yes
  • Contact: Nathan A.
  • Where: Electronics Workbench
x150px


Quick Start Instructions

  • Turn oven switch on (rotate clockwise)
  • Turn on oven rocker fan switch
  • Press Enter key
  • Use arrow keys to navigate to "Work" and press Enter
  • Slide conveyor over to one side completely (do not have loaded with PCBs), oven will start
  • Let oven heat up to profile's reflow temperature (e.g. 235C), about 30-35 minutes
  • Load PCBs on side not inside the oven
  • Slide conveyor to other side. PCBs will now be inside the oven.
  • Wait for timer to complete its cycle, ~240 seconds or whatever your current profile is set to
  • Once cycle is complete, slide the conveyor over again and let boards cool
    • Note: if you slide conveyor completely over to one side, the oven will automatically start another cycle. To avoid this, slide oven conveyor to the side partially.

Manual

Insert link or pictures here

Retrieved from "http://wiki.lvl1.org/index.php?title=APS_GF-B_Reflow_Oven&oldid=9330"