Unknown user: Blanked the page

2021-12-14T20:46:35Z

Blanked the page

← Older revision		Revision as of 15:46, 14 December 2021
Line 1:		Line 1:
	~~<nowiki>~~

	~~#define FP_IRQ_PIN 3~~
	~~#define FP_TX_PIN 19~~
	~~#define FP_RX_PIN 18~~

	~~#define FPSerial Serial1~~

	~~DFRobot_ID809 fingerprint;~~
	~~String desc;~~
	~~//File myFile;~~

	~~//#define QUARTER~~
	~~#ifdef QUARTER~~
	~~uint8_t data[6400]; //Quarter image~~
	~~#else~~
	~~uint8_t data[25600]; //Full image~~
	~~#endif~~

	~~int FP_x_offset = 46;~~
	~~int FP_y_offset = 77;~~
	~~int FP_x_width = 82;~~
	~~int FP_y_height = 82;~~

	~~bool fingerprint_captured = false;~~
	~~bool FP_first_pass = true;~~

	~~bool setup_FP()~~
	{
	~~int retest_loop = 0;~~

	~~pinMode(FP_IRQ_PIN,INPUT);~~
	~~/Init FPSerial/~~
	~~FPSerial.begin(115200);~~
	~~/Take FPSerial as communication port of fingerprint module /~~
	~~fingerprint.begin(FPSerial);~~
	~~while((fingerprint.isConnected() == false) && (retest_loop < 5))~~
	{
	~~Serial.println("Communication with device failed, please check connection");~~
	~~/Get error code information /~~
	~~desc = fingerprint.getErrorDescription();~~
	~~Serial.println(desc);~~
	~~delay(1000);~~
	~~++ retest_loop;~~
	}
	~~if (retest_loop < 5)~~
	~~return(true);~~
	~~else~~
	~~return(false);~~
	}


	~~void FP_Reset()~~
	{
	~~fingerprint_captured = false;~~
	~~FP_first_pass = true;~~
	}

	~~void FP_Frame()~~
	{
	~~int box_top = FP_y_offset;~~
	~~int box_bottom = box_top + FP_y_height;~~

	~~int box_left = FP_x_offset;~~
	~~int box_right = box_left + FP_x_width;~~

	~~int box_width = FP_x_width;~~
	~~int box_height = FP_y_height;~~

	~~int p_x, p_y, p_i, p_data, p_temp;~~

	~~if (FP_first_pass)~~
	{
	~~DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_BLACK,COMMON_MAGENTA);~~
	~~fingerprint.ctrlLED(/LEDMode = /fingerprint.eBreathing, /LEDColor = /fingerprint.eLEDRed, /blinkCount = /0);~~
	~~DrawScreenText(box_left+4, box_top+4,"Place Finger",COMMON_WHITE,COMMON_BLACK);~~
	~~DrawScreenText(box_left+4, box_top+16,"on Scanner",COMMON_WHITE,COMMON_BLACK);~~
	~~FP_first_pass = false;~~
	}

	~~if ((fingerprint.detectFinger()) && (!fingerprint_captured))~~
	{
	~~DrawScreenText(box_left+4, box_top+4,"Keep Finger ",COMMON_WHITE,COMMON_BLACK);~~
	~~DrawScreenText(box_left+4, box_top+16,"on Scanner",COMMON_WHITE,COMMON_BLACK);~~

	~~fingerprint.getFingerImage(data);~~
	~~fingerprint.ctrlLED(/LEDMode = /fingerprint.eKeepsOn, /LEDColor = /fingerprint.eLEDGreen, /blinkCount = /0);~~
	~~for (p_x=0; p_x < 80; ++p_x)~~
	~~for (p_y=0; p_y < 80; ++p_y)~~
	{
	~~p_temp = (p_x * 2);~~
	~~p_temp = p_temp + (p_y * 160);~~
	~~p_data = data[p_temp]/4; // image element~~

	~~p_temp = p_temp + 1;~~
	~~p_data = p_data + data[p_temp]/4; // image element to the right~~

	~~p_temp = (p_x * 2);~~
	~~p_temp = p_temp + ((p_y + 1) * 160);~~
	~~p_data = p_data + data[p_temp]/4; // image element below~~

	~~p_temp = (p_x + 1) * 2;~~
	~~p_temp = p_temp + ((p_y + 1) * 160);~~
	~~p_data = p_data + data[p_temp]/4; // image element to the right, one element down~~

	~~p_data = p_data/4;~~
	~~DrawScreenBlock(box_left + 1 + p_x, box_top + 1 + p_y, 1, 1, p_data<<5);~~
	}
	}

	}

	~~</nowiki>~~

	~~[[Pseudo-Medical_Monitor_Code#Custom_Includes]]~~

Unknown user: Created page with " #define FP_IRQ_PIN 3 #define FP_TX_PIN 19 #define FP_RX_PIN 18 #define FPSerial Serial1 DFRobot_ID809 fingerprint; String desc; //File myFile; //#define QUARTER..."

2021-12-11T23:01:24Z

Created page with " <nowiki> #define FP_IRQ_PIN 3 #define FP_TX_PIN 19 #define FP_RX_PIN 18 #define FPSerial Serial1 DFRobot_ID809 fingerprint; String desc; //File myFile; //#define QUARTER..."

New page

<nowiki>

#define FP_IRQ_PIN 3
#define FP_TX_PIN 19
#define FP_RX_PIN 18

#define FPSerial Serial1

DFRobot_ID809 fingerprint;
String desc;
//File myFile;

//#define QUARTER
#ifdef QUARTER
uint8_t data[6400]; //Quarter image
#else
uint8_t data[25600]; //Full image
#endif

int FP_x_offset = 46;
int FP_y_offset = 77;
int FP_x_width = 82;
int FP_y_height = 82;

bool fingerprint_captured = false;
bool FP_first_pass = true;

bool setup_FP()
{
int retest_loop = 0;

pinMode(FP_IRQ_PIN,INPUT);
/*Init FPSerial*/
FPSerial.begin(115200);
/*Take FPSerial as communication port of fingerprint module */
fingerprint.begin(FPSerial);
while((fingerprint.isConnected() == false) && (retest_loop < 5))
{
Serial.println("Communication with device failed, please check connection");
/*Get error code information */
desc = fingerprint.getErrorDescription();
Serial.println(desc);
delay(1000);
++ retest_loop;
}
if (retest_loop < 5)
return(true);
else
return(false);
}

void FP_Reset()
{
fingerprint_captured = false;
FP_first_pass = true;
}

void FP_Frame()
{
int box_top = FP_y_offset;
int box_bottom = box_top + FP_y_height;

int box_left = FP_x_offset;
int box_right = box_left + FP_x_width;

int box_width = FP_x_width;
int box_height = FP_y_height;

int p_x, p_y, p_i, p_data, p_temp;

if (FP_first_pass)
{
DrawScreenCompartment(box_left,box_top,box_width,box_height,COMMON_BLACK,COMMON_MAGENTA);
fingerprint.ctrlLED(/*LEDMode = */fingerprint.eBreathing, /*LEDColor = */fingerprint.eLEDRed, /*blinkCount = */0);
DrawScreenText(box_left+4, box_top+4,"Place Finger",COMMON_WHITE,COMMON_BLACK);
DrawScreenText(box_left+4, box_top+16,"on Scanner",COMMON_WHITE,COMMON_BLACK);
FP_first_pass = false;
}

if ((fingerprint.detectFinger()) && (!fingerprint_captured))
{
DrawScreenText(box_left+4, box_top+4,"Keep Finger ",COMMON_WHITE,COMMON_BLACK);
DrawScreenText(box_left+4, box_top+16,"on Scanner",COMMON_WHITE,COMMON_BLACK);

fingerprint.getFingerImage(data);
fingerprint.ctrlLED(/*LEDMode = */fingerprint.eKeepsOn, /*LEDColor = */fingerprint.eLEDGreen, /*blinkCount = */0);
for (p_x=0; p_x < 80; ++p_x)
for (p_y=0; p_y < 80; ++p_y)
{
p_temp = (p_x * 2);
p_temp = p_temp + (p_y * 160);
p_data = data[p_temp]/4; // image element

p_temp = p_temp + 1;
p_data = p_data + data[p_temp]/4; // image element to the right

p_temp = (p_x * 2);
p_temp = p_temp + ((p_y + 1) * 160);
p_data = p_data + data[p_temp]/4; // image element below

p_temp = (p_x + 1) * 2;
p_temp = p_temp + ((p_y + 1) * 160);
p_data = p_data + data[p_temp]/4; // image element to the right, one element down

p_data = p_data/4;
DrawScreenBlock(box_left + 1 + p_x, box_top + 1 + p_y, 1, 1, p_data<<5);
}
}

}

</nowiki>

[[Pseudo-Medical_Monitor_Code#Custom_Includes]]

Pseudo-Medical Monitor Code FP STUFF - Revision history

Unknown user: Blanked the page

Unknown user: Created page with " #define FP_IRQ_PIN 3 #define FP_TX_PIN 19 #define FP_RX_PIN 18 #define FPSerial Serial1 DFRobot_ID809 fingerprint; String desc; //File myFile; //#define QUARTER..."