Unknown user: Blanked the page

2021-12-14T20:45:33Z

Blanked the page

Unknown user at 22:56, 11 December 2021

2021-12-11T22:56:51Z

← Older revision		Revision as of 17:56, 11 December 2021
Line 135:		Line 135:

	</nowiki>		</nowiki>

			[[Pseudo-Medical_Monitor_Code#Custom_Includes]]

Unknown user: Created page with " #define AMG_INT_PIN 5 //low range of the sensor (this will be blue on the screen) #define MINTEMP 20 //high range of the sensor (this will be red on the screen) #..."

2021-12-11T22:56:05Z

Created page with " <nowiki> #define AMG_INT_PIN 5 //low range of the sensor (this will be blue on the screen) #define MINTEMP 20 //high range of the sensor (this will be red on the screen) #..."

New page

<nowiki>

#define AMG_INT_PIN 5

//low range of the sensor (this will be blue on the screen)
#define MINTEMP 20

//high range of the sensor (this will be red on the screen)
#define MAXTEMP 28

//the colors we will be using
const uint16_t camColors[] = {0x480F,
0x400F, 0x400F, 0x400F, 0x4010, 0x3810, 0x3810, 0x3810, 0x3810, 0x3010, 0x3010,
0x3010, 0x2810, 0x2810, 0x2810, 0x2810, 0x2010, 0x2010, 0x2010, 0x1810, 0x1810,
0x1811, 0x1811, 0x1011, 0x1011, 0x1011, 0x0811, 0x0811, 0x0811, 0x0011, 0x0011,
0x0011, 0x0011, 0x0011, 0x0031, 0x0031, 0x0051, 0x0072, 0x0072, 0x0092, 0x00B2,
0x00B2, 0x00D2, 0x00F2, 0x00F2, 0x0112, 0x0132, 0x0152, 0x0152, 0x0172, 0x0192,
0x0192, 0x01B2, 0x01D2, 0x01F3, 0x01F3, 0x0213, 0x0233, 0x0253, 0x0253, 0x0273,
0x0293, 0x02B3, 0x02D3, 0x02D3, 0x02F3, 0x0313, 0x0333, 0x0333, 0x0353, 0x0373,
0x0394, 0x03B4, 0x03D4, 0x03D4, 0x03F4, 0x0414, 0x0434, 0x0454, 0x0474, 0x0474,
0x0494, 0x04B4, 0x04D4, 0x04F4, 0x0514, 0x0534, 0x0534, 0x0554, 0x0554, 0x0574,
0x0574, 0x0573, 0x0573, 0x0573, 0x0572, 0x0572, 0x0572, 0x0571, 0x0591, 0x0591,
0x0590, 0x0590, 0x058F, 0x058F, 0x058F, 0x058E, 0x05AE, 0x05AE, 0x05AD, 0x05AD,
0x05AD, 0x05AC, 0x05AC, 0x05AB, 0x05CB, 0x05CB, 0x05CA, 0x05CA, 0x05CA, 0x05C9,
0x05C9, 0x05C8, 0x05E8, 0x05E8, 0x05E7, 0x05E7, 0x05E6, 0x05E6, 0x05E6, 0x05E5,
0x05E5, 0x0604, 0x0604, 0x0604, 0x0603, 0x0603, 0x0602, 0x0602, 0x0601, 0x0621,
0x0621, 0x0620, 0x0620, 0x0620, 0x0620, 0x0E20, 0x0E20, 0x0E40, 0x1640, 0x1640,
0x1E40, 0x1E40, 0x2640, 0x2640, 0x2E40, 0x2E60, 0x3660, 0x3660, 0x3E60, 0x3E60,
0x3E60, 0x4660, 0x4660, 0x4E60, 0x4E80, 0x5680, 0x5680, 0x5E80, 0x5E80, 0x6680,
0x6680, 0x6E80, 0x6EA0, 0x76A0, 0x76A0, 0x7EA0, 0x7EA0, 0x86A0, 0x86A0, 0x8EA0,
0x8EC0, 0x96C0, 0x96C0, 0x9EC0, 0x9EC0, 0xA6C0, 0xAEC0, 0xAEC0, 0xB6E0, 0xB6E0,
0xBEE0, 0xBEE0, 0xC6E0, 0xC6E0, 0xCEE0, 0xCEE0, 0xD6E0, 0xD700, 0xDF00, 0xDEE0,
0xDEC0, 0xDEA0, 0xDE80, 0xDE80, 0xE660, 0xE640, 0xE620, 0xE600, 0xE5E0, 0xE5C0,
0xE5A0, 0xE580, 0xE560, 0xE540, 0xE520, 0xE500, 0xE4E0, 0xE4C0, 0xE4A0, 0xE480,
0xE460, 0xEC40, 0xEC20, 0xEC00, 0xEBE0, 0xEBC0, 0xEBA0, 0xEB80, 0xEB60, 0xEB40,
0xEB20, 0xEB00, 0xEAE0, 0xEAC0, 0xEAA0, 0xEA80, 0xEA60, 0xEA40, 0xF220, 0xF200,
0xF1E0, 0xF1C0, 0xF1A0, 0xF180, 0xF160, 0xF140, 0xF100, 0xF0E0, 0xF0C0, 0xF0A0,
0xF080, 0xF060, 0xF040, 0xF020, 0xF800,
};

Adafruit_AMG88xx amg;
unsigned long delayTime;

#define AMG_COLS 8
#define AMG_ROWS 8
float pixels[AMG_COLS * AMG_ROWS];
bool AMG_first_pass = true;

#define INTERPOLATED_COLS 24
#define INTERPOLATED_ROWS 24

float get_point(float *p, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
void set_point(float *p, uint8_t rows, uint8_t cols, int8_t x, int8_t y, float f);
void get_adjacents_1d(float *src, float *dest, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
void get_adjacents_2d(float *src, float *dest, uint8_t rows, uint8_t cols, int8_t x, int8_t y);
float cubicInterpolate(float p[], float x);
float bicubicInterpolate(float p[], float x, float y);
void interpolate_image(float *src, uint8_t src_rows, uint8_t src_cols,
float *dest, uint8_t dest_rows, uint8_t dest_cols);

bool setup_AMG()
{
if (!amg.begin())
{
Serial.println("Could not find a valid AMG88xx sensor, check wiring!");
return(false);
}
return(true);
}

void AMG_Reset()
{
AMG_first_pass = true;
}

void drawpixels(int x_offset, int y_offset, float *p, uint8_t rows, uint8_t cols, uint8_t block_Width, uint8_t block_Height)
{
int colorTemp;

for (int y = 0; y < rows; y++)
{
for (int x = 0; x < cols; x++)
{
float val = get_point(p, rows, cols, x, y);

if (val >= MAXTEMP)
colorTemp = MAXTEMP;
else
if (val <= MINTEMP)
colorTemp = MINTEMP;
else
colorTemp = val;

uint8_t colorIndex = map(colorTemp, MINTEMP, MAXTEMP, 0, 255);
colorIndex = constrain(colorIndex, 0, 255);
//draw the pixels!
uint16_t color;
color = val * 2;
DrawScreenBlock(x_offset + (block_Width * x), y_offset + (((rows-1) - y) * block_Height), block_Width, block_Height, camColors[colorIndex]);
}
}
}

int AMG_x_offset = 44;
int AMG_y_offset = 0;
int AMG_x_width = 74;
int AMG_y_height = 74;

void AMG_Frame()
{

int AMG_box_top = AMG_y_offset;
int AMG_box_left = AMG_x_offset;

int AMG_box_width = AMG_x_width;
int AMG_box_height = AMG_y_height;

int block_size = 3;

//read all the pixels
amg.readPixels(pixels);
float dest_2d[INTERPOLATED_ROWS * INTERPOLATED_COLS];
int32_t t = millis();
interpolate_image(pixels, AMG_ROWS, AMG_COLS, dest_2d, INTERPOLATED_ROWS, INTERPOLATED_COLS);
if (AMG_first_pass)
{
DrawScreenCompartment(AMG_box_left, AMG_box_top, AMG_box_width, AMG_box_height, COMMON_BLACK, COMMON_ORANGE);
AMG_first_pass = false;
}

drawpixels(AMG_box_left+1,AMG_box_top+1,dest_2d, INTERPOLATED_ROWS, INTERPOLATED_COLS, block_size, block_size);
}

</nowiki>

Pseudo-Medical Monitor Code AMG STUFF - Revision history

Unknown user: Blanked the page

Unknown user at 22:56, 11 December 2021

Unknown user: Created page with " #define AMG_INT_PIN 5 //low range of the sensor (this will be blue on the screen) #define MINTEMP 20 //high range of the sensor (this will be red on the screen) #..."