Drill Press - Buffalo Forge Number 15 - Revision history

Unknown user at 04:31, 18 July 2020

2020-07-18T04:31:18Z

← Older revision		Revision as of 00:31, 18 July 2020
Line 21:		Line 21:
	# Keep children away (all visitors should be kept at a safe distance)<br />		# Keep children away (all visitors should be kept at a safe distance)<br />
	# Make workshop kid-proof (consider padlocks, master switches and/or starter keys)<br />		# Make workshop kid-proof (consider padlocks, master switches and/or starter keys)<br />
	# ~~Dont~~ force tool (it will do the job better and safer at the rate for which it was designed)<br />		# Don't force tool (it will do the job better and safer at the rate for which it was designed)<br />
	# Use right tool (don't force the tool or attachment to do a job it was not designed for)<br />		# Use right tool (don't force the tool or attachment to do a job it was not designed for)<br />
	# Wear proper apparel (don't wear loose clothing, gloves, neckties, or jewelry, contain long hair, roll-up sleeves above the elbow)<br />		# Wear proper apparel (don't wear loose clothing, gloves, neckties, or jewelry, contain long hair, roll-up sleeves above the elbow)<br />

Unknown user at 04:25, 18 July 2020

2020-07-18T04:25:43Z

← Older revision		Revision as of 00:25, 18 July 2020
Line 44:		Line 44:
	* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing		* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing
	The chuck is 1/2" max		The chuck is 1/2" max

	The motor is 1/3 HP, 1725 RPM, 115 VAC, 60 Hz, single-phase, 5.0 amp		The motor is 1/3 HP, 1725 RPM, 115 VAC, 60 Hz, single-phase, 5.0 amp

Unknown user at 04:24, 18 July 2020

2020-07-18T04:24:29Z

← Older revision		Revision as of 00:24, 18 July 2020
Line 59:		Line 59:
	# Plan your work and consider to use a spoil board to avoid damaging the table of the drill press		# Plan your work and consider to use a spoil board to avoid damaging the table of the drill press
	# Realize the stock scrap and sawdust/chips your project makes are still part of your project that you should not leave behind for other people to deal with. Wouldn’t it be nice if the last person did this for you? Wouldn’t this be equally polite for you to do the same for the next person that comes in after you?		# Realize the stock scrap and sawdust/chips your project makes are still part of your project that you should not leave behind for other people to deal with. Wouldn’t it be nice if the last person did this for you? Wouldn’t this be equally polite for you to do the same for the next person that comes in after you?
	# Plan and take the time to clean up after yourself before you leave		# Plan and take the time to clean up after yourself before you leave, it only takes a few minutes and is thre right thing to do
	# Always brush dust off the machine from top belt cover, to headstock, table, column, and base when you are done		# Always brush dust off the machine from top belt cover, to headstock, table, column, and base when you are done
	# This is a vintage machine that has given reliable service for over 60 years		# This is a vintage machine that has given reliable service for over 60 years
	# It is made available for considerate LVL1 members to use and enjoy, please don't abuse it or overload it		# It is made available for considerate LVL1 members to use and enjoy, please don't abuse it or overload it
	# It is nice to give it a WD-40 rub down with a shop rag to remove the last traces of dust and protect its metal		# It is nice to give it a WD-40 rub down with a shop rag to remove the last traces of dust and protect its metal

Unknown user at 04:22, 18 July 2020

2020-07-18T04:22:42Z

← Older revision		Revision as of 00:22, 18 July 2020
Line 48:		Line 48:
	== Photos ==		== Photos ==

	[[File:BuffaloForgeDrillPress1of2.JPG\|250px]] This right-side view shows the feed handle and the ~~quill~~ depth stop feature		[[File:BuffaloForgeDrillPress1of2.JPG\|250px]] This right-side view shows the quill feed handle and the depth stop feature

	[[File:BuffaloForgeDrillPress2of2.JPG\|250px]] This left-side view shows the headstock and table adjusting screws and quill retract spring knob (no need to adjust)		[[File:BuffaloForgeDrillPress2of2.JPG\|250px]] This left-side view shows the quill lock, the headstock and table adjusting screws and the quill retract spring knob (no need to adjust)

	== Being Excellent at the Drill Press ==		== Being Excellent at the Drill Press ==

Unknown user at 04:21, 18 July 2020

2020-07-18T04:21:09Z

Unknown user at 04:18, 18 July 2020

2020-07-18T04:18:55Z

← Older revision		Revision as of 00:18, 18 July 2020
Line 38:		Line 38:
	Watch this good generic introduction safety usage YouTube video (12:27 mm:ss) and/or find additional similar videos		Watch this good generic introduction safety usage YouTube video (12:27 mm:ss) and/or find additional similar videos
	* https://www.youtube.com/watch?v=Gby7a1hUAPg		* https://www.youtube.com/watch?v=Gby7a1hUAPg

			== Specifications ==

	Here is a link for the manual:		Here is a link for the manual:
	* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing		* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing
			The chuck is 1/2" max
			The motor is 1/3 HP, 1725 RPM, 115 VAC, 60 Hz, single-phase, 5.0 amp

			== Photos ==

			[[File:BuffaloForgeDrillPress1of2.JPG\|250px]] This right-side view shows the feed handle and the quill depth stop feature

			[[File:BuffaloForgeDrillPress2of2.JPG\|250px]] This left-side view shows the headstock and table adjusting screws and quill retract spring knob (no need to adjust)

			== Being Excellent at the Drill Press ==

	~~BuffaloForgeDrillPress1of2~~		# Realize that drill bits reside in known labeled box locations
			# Never leave your drill bit in the spindle when you are done
			# Always return the drill bit(s) you use back in their proper labeled box location(s) and leave the drill chuck empty for the next user
			# Plan your work and consider to use a spoil board to avoid damaging the table of the drill press
			# Realize the stock scrap and sawdust/chips your project makes are still part of your project that you should not leave behind for other people to deal with. Wouldn’t it be nice if the last person did this for you? Wouldn’t this be equally polite for you to do the same for the next person that comes in after you?
			# Plan and take the time to clean up after yourself before you leave
			# Always brush dust off the machine from top belt cover, to headstock, table, column, and base when you are done
			# This is a vintage machine that has given reliable service for over 60 years
			# It is made available for considerate LVL1 members to use and enjoy, please don't abuse it or overload it
			# It is nice to give it a WD-40 rub down with a shop rag to remove the last traces of dust and protect its metal

Unknown user at 03:55, 18 July 2020

2020-07-18T03:55:28Z

← Older revision		Revision as of 23:55, 17 July 2020
Line 41:		Line 41:
	Here is a link for the manual:		Here is a link for the manual:
	* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing		* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing



			BuffaloForgeDrillPress1of2

Unknown user at 22:26, 16 July 2020

2020-07-16T22:26:00Z

← Older revision		Revision as of 18:26, 16 July 2020
Line 40:		Line 40:

	Here is a link for the manual:		Here is a link for the manual:
	* https://drive.google.com/file/d/~~1_HuvCwkh4LL0v2NW3ZgbJgxI6HC8wGnn~~/view?usp=sharing		* https://drive.google.com/file/d/1EK5MmMQB_wEcPeUIU3VVBhkvWqe3Nyj8/view?usp=sharing

Unknown user at 22:19, 16 July 2020

2020-07-16T22:19:42Z

← Older revision		Revision as of 18:19, 16 July 2020
Line 7:		Line 7:
	\|contact=Jim.Dallam@gmail.com. cell: 513.300.5164		\|contact=Jim.Dallam@gmail.com. cell: 513.300.5164
	\|where=woodshop		\|where=woodshop
	\|picture=~~BuffaloForgeDrillPressNumber15~~.PNG		\|picture=BuffaloForgeDrillPressNumber15a.PNG
	}}		}}

Unknown user at 22:16, 16 July 2020

2020-07-16T22:16:08Z

← Older revision		Revision as of 18:16, 16 July 2020
Line 36:		Line 36:
	* 22. Never leave tool running unattended (turn power off and don't leave the tool until it comes to a complete stop)		* 22. Never leave tool running unattended (turn power off and don't leave the tool until it comes to a complete stop)

	Watch this good generic introduction safety usage YouTube video (5:48 mm:ss) and/or find additional similar videos		Watch this good generic introduction safety usage YouTube video (12:27 mm:ss) and/or find additional similar videos
	* https://www.youtube.com/watch?v=~~TZzZcNNOD28~~		* https://www.youtube.com/watch?v=Gby7a1hUAPg

	Here is a link for the manual:		Here is a link for the manual:
	* https://drive.google.com/file/d/1_HuvCwkh4LL0v2NW3ZgbJgxI6HC8wGnn/view?usp=sharing		* https://drive.google.com/file/d/1_HuvCwkh4LL0v2NW3ZgbJgxI6HC8wGnn/view?usp=sharing

← Older revision		Revision as of 00:21, 18 July 2020
Line 12:		Line 12:
	== Usage/Safety ==		== Usage/Safety ==

	General safety instructions for power tools ~~(from this machine's manual)~~		General safety instructions for power tools<br />
	* 01. Know your power tool (read and understand the owner's manual before using and understand the specific hazards)		# Know your power tool (read and understand the owner's manual before using and understand the specific hazards)<br />
	* 02. Ground all tools (use grounded 3-prong plug inserted into proper grounding type receptacle)		# Ground all tools (use grounded 3-prong plug inserted into proper grounding type receptacle)<br />
	* 03. Keep guards in place (and in working order with proper adjustment and alignment)		# Keep guards in place (and in working order with proper adjustment and alignment)<br />
	* 04. Remove adjusting keys and wrenches (form habit to check they are removed from tool before turning on the machine)		# Remove adjusting keys and wrenches (form habit to check they are removed from tool before turning on the machine)<br />
	* 05. Keep work area clean (cluttered areas and benches invite accidents and floor may be slippery due to sawdust)		# Keep work area clean (cluttered areas and benches invite accidents and floor may be slippery due to sawdust)<br />
	* 06. Avoid dangerous environment (don't use power tools in damp or wet locations, keep work area well lighted)		# Avoid dangerous environment (don't use power tools in damp or wet locations, keep work area well lighted)<br />
	* 07. Keep children away (all visitors should be kept at a safe distance)		# Keep children away (all visitors should be kept at a safe distance)<br />
	* 08. Make workshop kid-proof (consider padlocks, master switches and/or starter keys)		# Make workshop kid-proof (consider padlocks, master switches and/or starter keys)<br />
	* 09. Dont force tool (it will do the job better and safer at the rate for which it was designed)		# Dont force tool (it will do the job better and safer at the rate for which it was designed)<br />
	* 10. Use right tool (don't force the tool or attachment to do a job it was not designed for)		# Use right tool (don't force the tool or attachment to do a job it was not designed for)<br />
	* 11. Wear proper apparel (don't wear loose clothing, gloves, neckties, or jewelry, contain long hair, roll-up sleeves above the elbow)		# Wear proper apparel (don't wear loose clothing, gloves, neckties, or jewelry, contain long hair, roll-up sleeves above the elbow)<br />
	* 12. Use safety goggles (must comply with ANSI Z87.1, use face or dust mask and ear protection during extended periods of usage)		# Use safety goggles (must comply with ANSI Z87.1, use face or dust mask and ear protection during extended periods of usage)<br />
	* 13. Secure work (use clamps or a vice to hold work when practical as it is safer than using your hand)		# Secure work (use clamps or a vice to hold work when practical as it is safer than using your hand)<br />
	* 14. Don't overreach (keep proper footing and balance at all times)		# Don't overreach (keep proper footing and balance at all times)<br />
	* 15. Maintain tools with care (keep tools sharp and clean for best and safest performance)		# Maintain tools with care (keep tools sharp and clean for best and safest performance)<br />
	* 16. Disconnect tools (before servicing when changing accessories, belts, and disks)		# Disconnect tools (before servicing when changing accessories, belts, and disks)<br />
	* 17. Avoid accidental starting (make sure switch in in "OFF" position before plugging in)		# Avoid accidental starting (make sure switch in in "OFF" position before plugging in)<br />
	* 18. Use recommended accessories (consult the manual for recommended accessories, follow instructions, improper accessories may cause hazards)		# Use recommended accessories (consult the manual for recommended accessories, follow instructions, improper accessories may cause hazards)<br />
	* 19. Never stand on tool (~~seriousl~~ injury could occur if the tool is tipped or if the cutting tool is accidentally contacted)		# Never stand on tool (serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted)<br />
	* 20. Check damaged parts (a damaged guard should be checked for proper function, check alignment of moving parts, binding, breakage, etc.)		# Check damaged parts (a damaged guard should be checked for proper function, check alignment of moving parts, binding, breakage, etc.)<br />
	* 21. Direction of feed (feed work into a blade or cutter against the direction of rotation of the blade or cutter only)		# Direction of feed (feed work into a blade or cutter against the direction of rotation of the blade or cutter only)<br />
	* 22. Never leave tool running unattended (turn power off and don't leave the tool until it comes to a complete stop)		# Never leave tool running unattended (turn power off and don't leave the tool until it comes to a complete stop)<br />

	Watch this good generic introduction safety usage YouTube video (12:27 mm:ss) and/or find additional similar videos		Watch this good generic introduction safety usage YouTube video (12:27 mm:ss) and/or find additional similar videos