LVL1 - Recent changes [en]

05/05/2025

Costelkj — Wed, 06 May 2026 00:58:30 GMT

← Older revision		Revision as of 20:58, 5 May 2026
(3 intermediate revisions by the same user not shown)
Line 13:		Line 13:
	* The BEDRACE was lots of good fun with a quick finish and measurable increased success from last year. Thanks to everyone that got involved to get it put together under the wire.		* The BEDRACE was lots of good fun with a quick finish and measurable increased success from last year. Thanks to everyone that got involved to get it put together under the wire.
	** Check WAVE for coverage we were in the 2nd heat!		** Check WAVE for coverage we were in the 2nd heat!
			* Lego Night hosted by Adult Friends of Lego(AFOL) Friday!

	= Announcements =		= Announcements =
Line 20:		Line 20:
	* Tim is teaching CAD at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.		* Tim is teaching CAD at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.
	* Susanna from Calliope plans to join us May 19, I will create an interest sheet for two potential events that are currently being scheduled. 1. Paid private workshop, 2. free open tour to learn about screenprinting! Find updates here and on the bulletin board!		* Susanna from Calliope plans to join us May 19, I will create an interest sheet for two potential events that are currently being scheduled. 1. Paid private workshop, 2. free open tour to learn about screenprinting! Find updates here and on the bulletin board!
	* Grant Review this Thursday with Jeff (KY Colonel), help tidy as you're able and feel free to attend to support, no need to overwhelm but I would like to speak about each of the possibilities made possible by what's been included in the bid list.		* Grant Review this Thursday with Jeff (KY Colonel), help tidy as you're able and feel free to attend to support, no need to overwhelm but I would like to speak about each of the possibilities made possible by what's been included in the bid list.
			* The Red Bull Basement Project has concluded. The complimentary cans were quite popular - if interest I can see about beginning a vending relationship/sponsorship and propose to the budget committee.

	= The Tim VanSant Makership: LVL1's Makership Program =		= The Tim VanSant Makership: LVL1's Makership Program =
Line 42:		Line 43:

	'''Currently Broken'''		'''Currently Broken'''
	Rabbit Laser - active Funds Petition to replace the blower motor and service the flue.		* Rabbit Laser - active Funds Petition to replace the blower motor and service the flue - thanks Doc and Jeff
	Caster wheel on the welding table is blown and needs fixed/replaced		* Caster wheel on the welding table is blown and needs fixed/replaced
			* CR-10 large 3D printer is back under hospice care - Michael servicing

	=Quests =		=Quests =
Line 123:		Line 125:
	FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!		FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
	Calliope - Local Screen printing studio - tour for a group from LVL1		Calliope - Local Screen printing studio - tour for a group from LVL1

			Meshtastic 5/9 - Joe - Saturday!!!
			HamFest - More Radio Fun!!! 5/16

			No Holds Barred Pinewood Derby - 2nd Annual - the rules are basically there are no rules! Sometime in JUNE!!!!!!


	'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''		'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

05/05/2025

Costelkj — Tue, 05 May 2026 23:39:10 GMT

Created page with "__NOTOC__ 300px|thumb|right = Welcome = <big>'''Welcome to LVL1!'''</big> = Parking Validation = * Scan the QR code on the table by the door and enter your license plate number. * This applies 24/7, and must be done '''each ''' visit, every '''six''' hours. = Shoutouts = * The BEDRACE was lots of good fun with a quick finish and measurable increased success from last year. Thanks to everyone that got involved to get it put together under the..."

New page

__NOTOC__
[[File:lvl1logo.png|300px|thumb|right]]
= Welcome =

<big>'''Welcome to LVL1!'''</big>

= Parking Validation =

* Scan the QR code on the table by the door and enter your license plate number.
* This applies 24/7, and must be done '''each ''' visit, every '''six''' hours.

= Shoutouts =
* The BEDRACE was lots of good fun with a quick finish and measurable increased success from last year. Thanks to everyone that got involved to get it put together under the wire.
** Check WAVE for coverage we were in the 2nd heat!

= Announcements =

* Metal Matt is polling for requests of colors and materials for 3d Printer Filament Restock
* Tim is teaching CAD at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.
* Susanna from Calliope plans to join us May 19, I will create an interest sheet for two potential events that are currently being scheduled. 1. Paid private workshop, 2. free open tour to learn about screenprinting! Find updates here and on the bulletin board!
* Grant Review this Thursday with Jeff (KY Colonel), help tidy as you're able and feel free to attend to support, no need to overwhelm but I would like to speak about each of the possibilities made possible by what's been included in the bid list.

= The Tim VanSant Makership: LVL1's Makership Program =

* This program is funded completely through donations and NOT through our membership dues.
* We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
** Apply at https://lvl1.org/makership/ and apply via '''makership@lvl1.org'''
** Application deadline is the last day of each month @ 11:59 PM.
** Become a regular member of LVL1.
** Get 3 months of membership and up to $100 of project cost reimbursements!
* If you '''are''' a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
* Members: please talk up the Makership to potential new members.
* If your application is not approved, PLEASE revise and resubmit next month.
* Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!

= Broken/Equipment Report =

* Learn as much as you can, ask questions and find out the best practices to keep our available equipment in service.
* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!

'''Currently Broken'''
Rabbit Laser - active Funds Petition to replace the blower motor and service the flue.
Caster wheel on the welding table is blown and needs fixed/replaced

=Quests =
*'''Save the Planet and fix the Vending area ''' - Recycle your cans! Money from the recycling is going toward a new vending machine - fund is well filled,
** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
* Tidy up our appearances and improve our code compliance, DIY with excellence.

* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
* Member storage area improvements
** 2 New Stations shaping up in the back - Metal Casting & SoundLab

= Prospective Members =
* Benefits of joining: A key, a shelf, a vote, and can sponsor (events and new members)
* How to Join: Get to know us! We're not a community of strangers. Find three sponsors, complete form, initiate payment, attend Brunchventure™(2nd Saturday of each month hosted by membership officers).
* Why Join: Monetarily support the space, build the hacker community of Louisville.
* How to get sponsors: Connect with folks. Be seen cleaning. Become apart of the community.

= First Time Visitor Info =
[[File:Adobe-express-qr-code.jpeg|thumb]]
'''Are there any 1st time Visitors?'''

* Prime Directive: '''Be Excellent to Each other'''
* Being unsafe is being unexcellent!
** Please sign the waiver! We have dangerous tools that can cause '''serious injury''' if not used correctly and carefully. We're not responsible if you hurt yourself with them!
** Minors must be supervised at all times.
** Animals also must be supervised at all times.

** Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
** Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
** Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
** Discord https://discord.gg/aAxgSCQQWA

** Facebook, Twitter, Meetup, Youtube
** '''learn@lvl1.org''' - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
** '''broken@lvl1.org''' - Something broken? Does something need to be restocked?
** '''directors@lvl1.org''' - Need to contact those who are ostensibly "in charge"?
* Someone will be hosting a tour at the end of the meeting, near the front doors.

= Regular Weekly Meetups =

'''You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!'''

'''Monday'''
* Sound Builders 6:00 P.M. - 9:00 P.M.

'''Tuesday'''
* LVL1 Open Meeting, 8:00 P.M. - where you are right now!

'''Wednesday'''
* Open for the taking! Shenanigans to ensue..

'''Thursday'''
* Open Code Night at 8:00 P.M. - ??? If you want to code or interested in coding, this is your night.
* Bed Team 5:00 P.M.- 7:00 P.M.

'''Friday'''
* Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
** Last Friday:

Check the discord!

'''Saturday'''

'''Sunday'''

= Upcoming Events =

Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

Board meeting - 3rd Tuesday Before the Meeting (NEXT will be May19)

New Member Brunch Venture - 2nd Saturday of the Month

Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

* Tim is hosting a workshop at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.

Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
Calliope - Local Screen printing studio - tour for a group from LVL1

'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

= WATCHA MAKING? =

'''Making something cool?'''

'''Need help or materials for a project?'''

'''Have materials looking for a project?'''

'''Tell us about it!'''

Main Page

Costelkj — Tue, 05 May 2026 23:26:51 GMT

Recent Meeting Minutes

← Older revision		Revision as of 19:26, 5 May 2026
Line 113:		Line 113:

	=== Recent Meeting Minutes ===		=== Recent Meeting Minutes ===
			* [[05/05/2025]]
	* [[04/28/2026]]		* [[04/28/2026]]
	* [[04/21/2026]]		* [[04/21/2026]]

04/28/2026

Costelkj — Tue, 05 May 2026 23:25:00 GMT

New page

__NOTOC__
[[File:lvl1logo.png|300px|thumb|right]]
= Welcome =

<big>'''Welcome to LVL1!'''</big>

= Parking Validation =

* Scan the QR code on the table by the door and enter your license plate number.
* This applies 24/7, and must be done '''each ''' visit, every '''six''' hours.

= Shoutouts =
* The BEDRACE was lots of good fun with a quick finish and measurable increased success from last year. Thanks to everyone that got involved to get it put together under the wire.
** Check WAVE for coverage we were in the 2nd heat!

= Announcements =

* Metal Matt is polling for requests of colors and materials for 3d Printer Filament Restock
* Tim is teaching CAD at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.
* Susanna from Calliope plans to join us May 19, I will create an interest sheet for two potential events that are currently being scheduled. Paid private workshop, free open tour to learn about screenprinting! Find updates here and on the bulletin board!
* Grant Review this Thursday with Jeff (KY Colonel), help tidy as you're able and feel free to attend to support, no need to overwhelm but I would like to speak about each of the possibilities made possible by what's been included in the bid list.

= The Tim VanSant Makership: LVL1's Makership Program =

* This program is funded completely through donations and NOT through our membership dues.
* We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
** Apply at https://lvl1.org/makership/ and apply via '''makership@lvl1.org'''
** Application deadline is the last day of each month @ 11:59 PM.
** Become a regular member of LVL1.
** Get 3 months of membership and up to $100 of project cost reimbursements!
* If you '''are''' a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
* Members: please talk up the Makership to potential new members.
* If your application is not approved, PLEASE revise and resubmit next month.
* Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!

= Broken/Equipment Report =

* Learn as much as you can, ask questions and find out the best practices to keep our available equipment in service.
* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!

'''Currently Broken'''
Rabbit Laser - active Funds Petition to replace the blower motor and service the flue.
Caster wheel on the welding table is blown and needs fixed/replaced

=Quests =
*'''Save the Planet and fix the Vending area ''' - Recycle your cans! Money from the recycling is going toward a new vending machine - fund is well filled,
** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
* Tidy up our appearances and improve our code compliance, DIY with excellence.

* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
* Member storage area improvements
** 2 New Stations shaping up in the back - Metal Casting & SoundLab

= Prospective Members =
* Benefits of joining: A key, a shelf, a vote, and can sponsor (events and new members)
* How to Join: Get to know us! We're not a community of strangers. Find three sponsors, complete form, initiate payment, attend Brunchventure™(2nd Saturday of each month hosted by membership officers).
* Why Join: Monetarily support the space, build the hacker community of Louisville.
* How to get sponsors: Connect with folks. Be seen cleaning. Become apart of the community.

= First Time Visitor Info =
[[File:Adobe-express-qr-code.jpeg|thumb]]
'''Are there any 1st time Visitors?'''

* Prime Directive: '''Be Excellent to Each other'''
* Being unsafe is being unexcellent!
** Please sign the waiver! We have dangerous tools that can cause '''serious injury''' if not used correctly and carefully. We're not responsible if you hurt yourself with them!
** Minors must be supervised at all times.
** Animals also must be supervised at all times.

** Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
** Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
** Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
** Discord https://discord.gg/aAxgSCQQWA

** Facebook, Twitter, Meetup, Youtube
** '''learn@lvl1.org''' - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
** '''broken@lvl1.org''' - Something broken? Does something need to be restocked?
** '''directors@lvl1.org''' - Need to contact those who are ostensibly "in charge"?
* Someone will be hosting a tour at the end of the meeting, near the front doors.

= Regular Weekly Meetups =

'''You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!'''

'''Monday'''
* Sound Builders 6:00 P.M. - 9:00 P.M.

'''Tuesday'''
* LVL1 Open Meeting, 8:00 P.M. - where you are right now!

'''Wednesday'''
* Open for the taking! Shenanigans to ensue..

'''Thursday'''
* Open Code Night at 8:00 P.M. - ??? If you want to code or interested in coding, this is your night.
* Bed Team 5:00 P.M.- 7:00 P.M.

'''Friday'''
* Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
** Last Friday:

Check the discord!

'''Saturday'''

'''Sunday'''

= Upcoming Events =

Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

Board meeting - 3rd Tuesday Before the Meeting (NEXT WEEK APRIL 21)

New Member Brunch Venture - 2nd Saturday of the Month

Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

* Tim is hosting a workshop at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.

* The BEDRACE IS ON MONDAY APRIL 27!!!!!!!!!!!!!!!!!!!!!!!Join us for the tailgate and come support! We need help this week to finish the fabrication this week.

Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
Calliope - Local Screen printing studio - tour for a group from LVL1

'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

= WATCHA MAKING? =

'''Making something cool?'''

'''Need help or materials for a project?'''

'''Have materials looking for a project?'''

'''Tell us about it!'''

Main Page

Costelkj — Wed, 29 Apr 2026 00:06:45 GMT

Recent Meeting Minutes

← Older revision		Revision as of 20:06, 28 April 2026
Line 113:		Line 113:

	=== Recent Meeting Minutes ===		=== Recent Meeting Minutes ===
			* [[04/28/2026]]
	* [[04/21/2026]]		* [[04/21/2026]]
	* [[04/14/2026]]		* [[04/14/2026]]

User:HwaMww947855

HwaMww947855 — Mon, 27 Apr 2026 04:07:30 GMT

← Older revision		Revision as of 00:07, 27 April 2026
Line 1:		Line 1:
	~~Hello! My name is Jarrod. <br>It is a little about myself:~~ I live in ~~Netherlands, my city of Groningen~~. <br>~~It's called often Northern or cultural capital of GR.~~ I'~~ve married 2 years ago~~.~~<br>~~I ~~have two children - a son (Luann)~~ and ~~the daughter (Elton). We all like Vehicle restoration~~.<br><br>my ~~homepage~~ - [http://knowledge.thinkingstorm.com/UserProfile/tabid/57/userId/~~2524266~~/Default.aspx masculine bedroom ~~design ideas 2025~~]		I'm Fae and I live in Taylorville. <br>I'm interested in Theatre, Parkour and Chinese art. I like travelling and watching CSI.<br><br>Feel free to visit my web-site [http://knowledge.thinkingstorm.com/UserProfile/tabid/57/userId/2898185/Default.aspx how to decorate a masculine bedroom]

04/21/2026

Costelkj — Wed, 22 Apr 2026 00:14:20 GMT

Broken/Equipment Report

← Older revision		Revision as of 20:14, 21 April 2026
(3 intermediate revisions by the same user not shown)
Line 18:		Line 18:
	= Announcements =		= Announcements =
	*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''		*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''
	** Less than 2 Weeks remain till race day.		** Less than 1 Weeks remain till race day.
			* JoeT has been officially awarded the latest makership for developing a one-handed controller for limited mobility users..
	* JoeT has been officially awarded the latest makership for developing a one-handed controller for limited mobility users..		* Metal Matt is polling for requests of colors and materials for 3d Printer Filament Restock
			* Tim is guest starring at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.

	= The Tim VanSant Makership: LVL1's Makership Program =		= The Tim VanSant Makership: LVL1's Makership Program =
Line 42:		Line 43:

	'''Currently Broken'''		'''Currently Broken'''
	* Bathroom door lock timer ~~appears stuck~~ - make sure it is spun back to locked position when returning		* Bathroom door lock timer was sticking - make sure it is spun back to locked position when returning and double check when you are the last to leave
	* MIG welder, component in the WIP appears to be ~~blocking~~ the wire from feeding, ~~Matt~~ had ~~been investigating~~		* MIG welder, component in the WIP appears to be restricting the wire from feeding smoothly, corrected the feed wheel groove and adjusted the tightness and had success on 4/20
	* Parking? worked for me		* Parking? worked for me


	=Quests =		=Quests =
Line 119:		Line 119:

	Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.		Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

			* Tim is hosting a workshop at FirstBuild to teach an OpenSCAD workshop May 15, 5-8pm.

			* The BEDRACE IS ON MONDAY APRIL 27!!!!!!!!!!!!!!!!!!!!!!!Join us for the tailgate and come support! We need help this week to finish the fabrication this week.

	Prospective Events - (K3 reaching out to find out about getting a group of us in the door):		Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
Line 125:		Line 129:

	'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''		'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''


	= WATCHA MAKING? =		= WATCHA MAKING? =

O&D Meeting 04/21/2026

Costelkj — Tue, 21 Apr 2026 23:57:01 GMT

Round Table

← Older revision		Revision as of 19:57, 21 April 2026
(One intermediate revision by the same user not shown)
Line 58:		Line 58:
	== Round Table ==		== Round Table ==

	Outreach - follow up and call separate meeting		Outreach - follow up and call separate meeting - culture, move the conversation

	Code Compliance - Safety Dance - recover notes		Code Compliance - Safety Dance - recover notes, schedule a time to work

	Stained Glass workshop?		Stained Glass workshop?

	Vectric - Other Programs		Vectric - Other Programs

			Learn photos

	== Action Items for Next Meeting ==		== Action Items for Next Meeting ==

04/21/2026

Costelkj — Tue, 21 Apr 2026 23:52:53 GMT

Created page with "__NOTOC__ 300px|thumb|right = Welcome = <big>'''Welcome to LVL1!'''</big> = Parking Validation = * Scan the QR code on the table by the door and enter your license plate number. * This applies 24/7, and must be done '''each ''' visit, every '''six''' hours. = Shoutouts = '''People getting caught being awesome and doing things for the space.''' * Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed..."

New page

__NOTOC__
[[File:lvl1logo.png|300px|thumb|right]]
= Welcome =

<big>'''Welcome to LVL1!'''</big>

= Parking Validation =

* Scan the QR code on the table by the door and enter your license plate number.
* This applies 24/7, and must be done '''each ''' visit, every '''six''' hours.

= Shoutouts =
'''People getting caught being awesome and doing things for the space.'''
* Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed controller
* JimD pursuing the transport of a working powertool drag-race installation he was en route to NC.
* last weekend Power Racing Team brought back some glory from Indianapolis - Starz won 3rd place overall and Bumblebee cruised to the top spot in our hearts.

= Announcements =
*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''
** Less than 2 Weeks remain till race day.

* JoeT has been officially awarded the latest makership for developing a one-handed controller for limited mobility users..

= The Tim VanSant Makership: LVL1's Makership Program =

* This program is funded completely through donations and NOT through our membership dues.
* We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
** Apply at https://lvl1.org/makership/ and apply via '''makership@lvl1.org'''
** Application deadline is the last day of each month @ 11:59 PM.
** Become a regular member of LVL1.
** Get 3 months of membership and up to $100 of project cost reimbursements!
* If you '''are''' a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
* Members: please talk up the Makership to potential new members.
* If your application is not approved, PLEASE revise and resubmit next month.
* Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!

= Broken/Equipment Report =

* Learn as much as you can, ask questions and find out the best practices to keep our available equipment in service.
* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!

'''Currently Broken'''
* Bathroom door lock timer appears stuck - make sure it is spun back to locked position when returning
* MIG welder, component in the WIP appears to be blocking the wire from feeding, Matt had been investigating
* Parking? worked for me

=Quests =
*'''Save the Planet and fix the Vending area ''' - Recycle your cans! Money from the recycling is going toward a new vending machine - fund is well filled,
** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
* Tidy up our appearances and improve our code compliance, DIY with excellence.

* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
* Member storage area improvements
** 2 New Stations shaping up in the back - Metal Casting & SoundLab

= Prospective Members =
* Benefits of joining: A key, a shelf, a vote, and can sponsor (events and new members)
* How to Join: Get to know us! We're not a community of strangers. Find three sponsors, complete form, initiate payment, attend Brunchventure™(2nd Saturday of each month hosted by membership officers).
* Why Join: Monetarily support the space, build the hacker community of Louisville.
* How to get sponsors: Connect with folks. Be seen cleaning. Become apart of the community.

= First Time Visitor Info =
[[File:Adobe-express-qr-code.jpeg|thumb]]
'''Are there any 1st time Visitors?'''

* Prime Directive: '''Be Excellent to Each other'''
* Being unsafe is being unexcellent!
** Please sign the waiver! We have dangerous tools that can cause '''serious injury''' if not used correctly and carefully. We're not responsible if you hurt yourself with them!
** Minors must be supervised at all times.
** Animals also must be supervised at all times.

** Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
** Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
** Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
** Discord https://discord.gg/aAxgSCQQWA

** Facebook, Twitter, Meetup, Youtube
** '''learn@lvl1.org''' - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
** '''broken@lvl1.org''' - Something broken? Does something need to be restocked?
** '''directors@lvl1.org''' - Need to contact those who are ostensibly "in charge"?
* Someone will be hosting a tour at the end of the meeting, near the front doors.

= Regular Weekly Meetups =

'''You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!'''

'''Monday'''
* Sound Builders 6:00 P.M. - 9:00 P.M.

'''Tuesday'''
* LVL1 Open Meeting, 8:00 P.M. - where you are right now!

'''Wednesday'''
* Open for the taking! Shenanigans to ensue..

'''Thursday'''
* Open Code Night at 8:00 P.M. - ??? If you want to code or interested in coding, this is your night.
* Bed Team 5:00 P.M.- 7:00 P.M.

'''Friday'''
* Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
** Last Friday:

Check the discord!

'''Saturday'''

'''Sunday'''

= Upcoming Events =

Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

Board meeting - 3rd Tuesday Before the Meeting (NEXT WEEK APRIL 21)

New Member Brunch Venture - 2nd Saturday of the Month

Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
Calliope - Local Screen printing studio - tour for a group from LVL1

'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

= WATCHA MAKING? =

'''Making something cool?'''

'''Need help or materials for a project?'''

'''Have materials looking for a project?'''

'''Tell us about it!'''

Main Page

Costelkj — Tue, 21 Apr 2026 23:51:15 GMT

Recent Meeting Minutes

← Older revision		Revision as of 19:51, 21 April 2026
Line 113:		Line 113:

	=== Recent Meeting Minutes ===		=== Recent Meeting Minutes ===
			* [[04/21/2026]]
	* [[04/14/2026]]		* [[04/14/2026]]
	* [[04/07/2026]]		* [[04/07/2026]]

O&D Meeting 04/21/2026

Costelkj — Tue, 21 Apr 2026 23:48:18 GMT

New Business

← Older revision		Revision as of 19:48, 21 April 2026
(One intermediate revision by the same user not shown)
Line 49:		Line 49:
	*** New separation of flammables/acids separate cabinets		*** New separation of flammables/acids separate cabinets

	**Safety Meeting make agenda - '''March 1th Sunday'''		**Safety Meeting make agenda - '''March 1th Sunday''' the plans from this event have been followed thru uponst hooray lets do it again

	* Security Cameras		* Security Cameras

	* General Tidy & Code Compliance -		* General Tidy & Code Compliance -

03/1/2026

Costelkj — Tue, 21 Apr 2026 23:41:11 GMT

Created page with "Hooray"

New page

Hooray

O&D Meeting 04/21/2026

Costelkj — Tue, 21 Apr 2026 23:19:36 GMT

Agenda

← Older revision		Revision as of 19:19, 21 April 2026
Line 3:		Line 3:
	== Old Action Items ==		== Old Action Items ==

	* Revision of the Wavier Stuff - Raj		* Revision of the Wavier Stuff - Raj update at next meeting 5?

	* Intercom - Joe		* Intercom - Joe

O&D Meeting 04/21/2026

JimD — Tue, 21 Apr 2026 20:23:12 GMT

← Older revision		Revision as of 16:23, 21 April 2026
(4 intermediate revisions by the same user not shown)
Line 31:		Line 31:

	== Membership Report ==		== Membership Report ==
	~~Our February~~ membership ~~stands at~~ 68 ~~souls. Let's keep working on our goal to be at 80 members by year end.~~		Financial records show membership holding steady with 68 payments in each of the first three months of 2026.
	~~This is~~ the ~~link to the February report: <[LVL1 - Membership Trend 202602.pdf]>~~.

	== Treasurer Report ==		== Treasurer Report ==
	~~For the last three years, there has been a pattern. February financials consistently just SUCK. There are three primary reasons:~~		Here is the [https://drive.google.com/file/d/1Re_-wSWxNp3aP9_ZmGitF8lpkjHvNsBe/view?usp=sharing LVL1-FinancialSummary-202603.pdf] with the following values:
	* Reason #1 = ($1,416.00) expense for the annual Pike13 "Essential Advantage Buisness Fee" that gets charged in February each year.		* March 2026 REVENUE totaled $6,054.37. This is largely due to Feburary being a short month with end-of-February payments being credited to March.
	* Reason #2 = ($959.86) expense for the Feb. LG&E utility bill (was $969.74 for Feb. 2024, and was an astronomical $1,654.19 for Feb. 2025)		* March 2026 EXPENSE totaled ($5,228.21).
	* Reason #3 = ($650.00) a "revenue shift" because 10 of the 60 Pike13 membership payments that fall near the end of the February, shift to show as Republic Bank deposits in March, not February.		* March 2026 NET was cash POSITIVE at ($826.16).

	Here is the <[https://drive.google.com/file/d/~~1GeIfmLsIdWEBz~~-~~wGz77GJ-1-MCCtmI3Z~~/view?usp=sharing LVL1-FinancialSummary-~~202602~~.pdf]< with the following values:
	* ~~February~~ 2026 REVENUE totaled $3,~~884~~.27.
	* ~~February~~ 2026 EXPENSE totaled ($5,~~429~~.81).
	* ~~February~~ 2026 NET was cash ~~NEGATIVE~~ at ($~~1,545~~.54).

	~~Next month's report will be based on the March numbers and should start to recover from this hole.~~

	~~March Report => [https://drive.google.com/file/d/1Re_-wSWxNp3aP9_ZmGitF8lpkjHvNsBe/view?usp=sharing LVL1-FinancialSummary-202602.pdf]~~

	== New Business ==		== New Business ==

04/14/2026

Costelkj — Wed, 15 Apr 2026 00:37:23 GMT

← Older revision		Revision as of 20:37, 14 April 2026
(2 intermediate revisions by the same user not shown)
Line 13:		Line 13:
	'''People getting caught being awesome and doing things for the space.'''		'''People getting caught being awesome and doing things for the space.'''
	* Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed controller		* Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed controller

	* JimD pursuing the transport of a working powertool drag-race installation he was en route to NC.		* JimD pursuing the transport of a working powertool drag-race installation he was en route to NC.
			* Power Racing Team brought back some glory from Indianapolis - Starz won 3rd place overall and Bumblebee cruised to the top spot in our hearts.
			* JoeL for bringing in the 'Za

	= Announcements =		= Announcements =
	* Member Storage can resume, shelves have been tagged and records audited. Items remaining on non-member shelves shall be handled by contacting owners and pursuing a reasonable amount of time and effort to responsibly remove.
	** If you may want to transfer to a new or soonly available shelf, please meet with myself and Tim to update our records and claim a new place for your stuff!

	*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''		*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''
	** 4 Weeks remain till race day.		** Less than 2 Weeks remain till race day.

	* JoeT has been awarded ~~February's~~ makership for developing a one-handed controller for limited mobility users. ~~A week remains to apply for March's round~~.		* JoeT has been officially awarded the latest makership for developing a one-handed controller for limited mobility users..

	= The Tim VanSant Makership: LVL1's Makership Program =		= The Tim VanSant Makership: LVL1's Makership Program =
Line 43:		Line 41:
	* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.		* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
	* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!		* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!


	'''Currently Broken'''		'''Currently Broken'''
	* Bathroom door lock timer appears stuck - make sure it is spun back to locked position when returning		* Bathroom door lock timer appears stuck - make sure it is spun back to locked position when returning
			* MIG welder, component in the WIP appears to be blocking the wire from feeding, Matt had been investigating
			* Parking? worked for me

	~~Recent Fixes~~
	* Front door lock mechanism is failing, replacement parts arrived and installed - thanks Lockadoc!
	* A stink has lingered in the bathrooms, and the landlord has been in contact with a plumber to react to additional complaints.
	* Possum Clock went down and back up

	=Quests =		=Quests =
Line 57:		Line 52:
	** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge		** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
	* Tidy up our appearances and improve our code compliance, DIY with excellence.		* Tidy up our appearances and improve our code compliance, DIY with excellence.
	* Develop
	* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.		* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
	* Member storage area improvements		* Member storage area improvements
	** 2 New Stations shaping up in the back - Metal Casting, SoundLab		** 2 New Stations shaping up in the back - Metal Casting & SoundLab

	= Prospective Members =		= Prospective Members =
Line 100:		Line 95:

	'''Wednesday'''		'''Wednesday'''
	* Open for the taking!		* Open for the taking! Shenanigans to ensue..

	'''Thursday'''		'''Thursday'''
Line 120:		Line 115:
	Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs		Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

	~~Wednesday 5p 4/1 Vibe Coding with KYX @ The Pointe~~		Board meeting - 3rd Tuesday Before the Meeting (NEXT WEEK APRIL 21)

	Board meeting - 3rd Tuesday Before the Meeting

	New Member Brunch Venture - 2nd Saturday of the Month		New Member Brunch Venture - 2nd Saturday of the Month

O&D Meeting 04/21/2026

Costelkj — Tue, 14 Apr 2026 22:26:13 GMT

Created page with "= Agenda = == Old Action Items == * Revision of the Wavier Stuff - Raj * Intercom - Joe * Sump Pump - tabled till warmer weather * 2nd Sink - health and plumbing dept approval 6-8 weeks (No mention of food) ** understand details of requirements, evaluate benefits and increased offerings, increased making capability larger wash, food? ** HIVE13 advice? * Lighting in Bone Yard - Joe, 5/6 additional ready to hang * Member Shelves - Clean up day - gather gameplan, te..."

New page

= Agenda =

== Old Action Items ==

* Revision of the Wavier Stuff - Raj

* Intercom - Joe

* Sump Pump - tabled till warmer weather

* 2nd Sink - health and plumbing dept approval 6-8 weeks (No mention of food)
** understand details of requirements, evaluate benefits and increased offerings, increased making capability larger wash, food?
** HIVE13 advice?

* Lighting in Bone Yard - Joe, 5/6 additional ready to hang

* Member Shelves - Clean up day - gather gameplan, temporary storage - tag totes,

== Old Business ==

* LVL1 Woodshop Dust Mitigation Project
** A trial filter/fan box unit has been fabricated and installed above the wood shop work bench for beta testing. It powers on/off with the woodshop lights
** It is hoped the woodshop will get a thorough cleaning during the upcoming March 20-21 Spring Cleaning event
** Plans to test and "optimize" dust mitigation provisions at each of the woodshop power tools are under consideration for the coming months.

* LVL1 Space Temperature Monitoring Project = As reported here [https://docs.google.com/presentation/d/13lBETcNT1Cwbp5_-0PS-c3gkywZYJ6-UeqZieU40Be0/edit?usp=drive_link [link]]
** Loc-a-Doc's Phase 2 hardware installation continues to expand in scope and functionality. There are new online views using the online Blynk app.
** We are considering ways to expand the view of the online temperature data to interested members. Join our team if you are interested.
** We missed the golden opportunity for valuable data during the past cold snap, but are proceeding with the installation to be prepared for this summer and next winter.

== Membership Report ==
Our February membership stands at 68 souls. Let's keep working on our goal to be at 80 members by year end.
This is the link to the February report: <[LVL1 - Membership Trend 202602.pdf]>.

== Treasurer Report ==
For the last three years, there has been a pattern. February financials consistently just SUCK. There are three primary reasons:
* Reason #1 = ($1,416.00) expense for the annual Pike13 "Essential Advantage Buisness Fee" that gets charged in February each year.
* Reason #2 = ($959.86) expense for the Feb. LG&E utility bill (was $969.74 for Feb. 2024, and was an astronomical $1,654.19 for Feb. 2025)
* Reason #3 = ($650.00) a "revenue shift" because 10 of the 60 Pike13 membership payments that fall near the end of the February, shift to show as Republic Bank deposits in March, not February.

Here is the <[https://drive.google.com/file/d/1GeIfmLsIdWEBz-wGz77GJ-1-MCCtmI3Z/view?usp=sharing LVL1-FinancialSummary-202602.pdf]< with the following values:
* February 2026 REVENUE totaled $3,884.27.
* February 2026 EXPENSE totaled ($5,429.81).
* February 2026 NET was cash NEGATIVE at ($1,545.54).

Next month's report will be based on the March numbers and should start to recover from this hole.

March Report => [https://drive.google.com/file/d/1Re_-wSWxNp3aP9_ZmGitF8lpkjHvNsBe/view?usp=sharing LVL1-FinancialSummary-202602.pdf]

== New Business ==

* Verify any remaining transition items that need to occur?

* Schedule and pitch new cleanup events:
**Member shelf cleanup/audit - give notice to membership to begin tidying their shelves before March20
**March20 = Day1 of Spring - collective cleaning day/weekend with areas of focus: boneyard/main room, items of unknown origin will be tossed!!
** Draft some informative resources to publish regarding safety - Helen
*** New separation of flammables/acids separate cabinets

**Safety Meeting make agenda - '''March 1th Sunday'''

* Security Cameras

* General Tidy & Code Compliance -
**Sprinklers? Raj to review lease

== Round Table ==

Outreach - follow up and call separate meeting

Code Compliance - Safety Dance - recover notes

Stained Glass workshop?

Vectric - Other Programs

== Action Items for Next Meeting ==
Transition next week before the meeting - Everyone

Republic Bank things - Jim and Kevin C.

Update members of the KY Colonels- Kevin C.

= Minutes =

O&D Meetings

Costelkj — Tue, 14 Apr 2026 22:25:50 GMT

2026 Meeting Minutes

← Older revision		Revision as of 18:25, 14 April 2026
Line 16:		Line 16:
	----		----
	===2026 Meeting Minutes===		===2026 Meeting Minutes===
			*[[O&D Meeting 04/21/2026]]
	*[[O&D Meeting 03/17/2026]]		*[[O&D Meeting 03/17/2026]]
	*[[O&D Meeting 02/17/2026]]		*[[O&D Meeting 02/17/2026]]

04/14/2026

Costelkj — Tue, 14 Apr 2026 22:25:09 GMT

Created page with "__NOTOC__ 300px|thumb|right = Welcome = <big>'''Welcome to LVL1!'''</big> = Parking Validation = * Scan the QR code on the table by the door and enter your license plate number. * This applies 24/7, and must be done '''each ''' visit, every '''six''' hours. = Shoutouts = '''People getting caught being awesome and doing things for the space.''' * Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed..."

New page

__NOTOC__
[[File:lvl1logo.png|300px|thumb|right]]
= Welcome =

<big>'''Welcome to LVL1!'''</big>

= Parking Validation =

* Scan the QR code on the table by the door and enter your license plate number.
* This applies 24/7, and must be done '''each ''' visit, every '''six''' hours.

= Shoutouts =
'''People getting caught being awesome and doing things for the space.'''
* Hosts of Brunchventure, Danielle and all who were there, newest makership recipient JoeT.- 1handed controller

* JimD pursuing the transport of a working powertool drag-race installation he was en route to NC.

= Announcements =
* Member Storage can resume, shelves have been tagged and records audited. Items remaining on non-member shelves shall be handled by contacting owners and pursuing a reasonable amount of time and effort to responsibly remove.
** If you may want to transfer to a new or soonly available shelf, please meet with myself and Tim to update our records and claim a new place for your stuff!

*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''
** 4 Weeks remain till race day.

* JoeT has been awarded February's makership for developing a one-handed controller for limited mobility users. A week remains to apply for March's round.

= The Tim VanSant Makership: LVL1's Makership Program =

* This program is funded completely through donations and NOT through our membership dues.
* We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
** Apply at https://lvl1.org/makership/ and apply via '''makership@lvl1.org'''
** Application deadline is the last day of each month @ 11:59 PM.
** Become a regular member of LVL1.
** Get 3 months of membership and up to $100 of project cost reimbursements!
* If you '''are''' a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
* Members: please talk up the Makership to potential new members.
* If your application is not approved, PLEASE revise and resubmit next month.
* Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!

= Broken/Equipment Report =

* Learn as much as you can, ask questions and find out the best practices to keep our available equipment in service.
* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!

'''Currently Broken'''
* Bathroom door lock timer appears stuck - make sure it is spun back to locked position when returning

Recent Fixes
* Front door lock mechanism is failing, replacement parts arrived and installed - thanks Lockadoc!
* A stink has lingered in the bathrooms, and the landlord has been in contact with a plumber to react to additional complaints.
* Possum Clock went down and back up

=Quests =
*'''Save the Planet and fix the Vending area ''' - Recycle your cans! Money from the recycling is going toward a new vending machine - fund is well filled,
** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
* Tidy up our appearances and improve our code compliance, DIY with excellence.
* Develop
* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
* Member storage area improvements
** 2 New Stations shaping up in the back - Metal Casting, SoundLab

= Prospective Members =
* Benefits of joining: A key, a shelf, a vote, and can sponsor (events and new members)
* How to Join: Get to know us! We're not a community of strangers. Find three sponsors, complete form, initiate payment, attend Brunchventure™(2nd Saturday of each month hosted by membership officers).
* Why Join: Monetarily support the space, build the hacker community of Louisville.
* How to get sponsors: Connect with folks. Be seen cleaning. Become apart of the community.

= First Time Visitor Info =
[[File:Adobe-express-qr-code.jpeg|thumb]]
'''Are there any 1st time Visitors?'''

* Prime Directive: '''Be Excellent to Each other'''
* Being unsafe is being unexcellent!
** Please sign the waiver! We have dangerous tools that can cause '''serious injury''' if not used correctly and carefully. We're not responsible if you hurt yourself with them!
** Minors must be supervised at all times.
** Animals also must be supervised at all times.

** Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
** Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
** Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
** Discord https://discord.gg/aAxgSCQQWA

** Facebook, Twitter, Meetup, Youtube
** '''learn@lvl1.org''' - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
** '''broken@lvl1.org''' - Something broken? Does something need to be restocked?
** '''directors@lvl1.org''' - Need to contact those who are ostensibly "in charge"?
* Someone will be hosting a tour at the end of the meeting, near the front doors.

= Regular Weekly Meetups =

'''You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!'''

'''Monday'''
* Sound Builders 6:00 P.M. - 9:00 P.M.

'''Tuesday'''
* LVL1 Open Meeting, 8:00 P.M. - where you are right now!

'''Wednesday'''
* Open for the taking!

'''Thursday'''
* Open Code Night at 8:00 P.M. - ??? If you want to code or interested in coding, this is your night.
* Bed Team 5:00 P.M.- 7:00 P.M.

'''Friday'''
* Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
** Last Friday:

Check the discord!

'''Saturday'''

'''Sunday'''

= Upcoming Events =

Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

Wednesday 5p 4/1 Vibe Coding with KYX @ The Pointe

Board meeting - 3rd Tuesday Before the Meeting

New Member Brunch Venture - 2nd Saturday of the Month

Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
Calliope - Local Screen printing studio - tour for a group from LVL1

'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

= WATCHA MAKING? =

'''Making something cool?'''

'''Need help or materials for a project?'''

'''Have materials looking for a project?'''

'''Tell us about it!'''

O&D Meeting 03/17/2026

JimD — Tue, 14 Apr 2026 22:21:00 GMT

← Older revision		Revision as of 18:21, 14 April 2026
Line 46:		Line 46:

	Next month's report will be based on the March numbers and should start to recover from this hole.		Next month's report will be based on the March numbers and should start to recover from this hole.

			March Report => [https://drive.google.com/file/d/1Re_-wSWxNp3aP9_ZmGitF8lpkjHvNsBe/view?usp=sharing LVL1-FinancialSummary-202602.pdf]

	== New Business ==		== New Business ==

04/07/2026

Costelkj — Tue, 14 Apr 2026 22:06:52 GMT

Created page with "__NOTOC__ 300px|thumb|right = Welcome = <big>'''Welcome to LVL1!'''</big> = Parking Validation = * Scan the QR code on the table by the door and enter your license plate number. * This applies 24/7, and must be done '''each ''' visit, every '''six''' hours. = Shoutouts = '''People getting caught being awesome and doing things for the space.''' * Spring Cleaning Crew, Controllers of Chaos - KevinP,Orion,JeffMc,DanielS,PaulB,Tiff,Helen,Tim,Meta..."

New page

__NOTOC__
[[File:lvl1logo.png|300px|thumb|right]]
= Welcome =

<big>'''Welcome to LVL1!'''</big>

= Parking Validation =

* Scan the QR code on the table by the door and enter your license plate number.
* This applies 24/7, and must be done '''each ''' visit, every '''six''' hours.

= Shoutouts =
'''People getting caught being awesome and doing things for the space.'''
* Spring Cleaning Crew, Controllers of Chaos - KevinP,Orion,JeffMc,DanielS,PaulB,Tiff,Helen,Tim,MetalMatt,JimD,AnthonyK.
* Patrick, prospective member thoroughly cleaned and tidied some areas in the back to make room in back for a SoundLab, bringing in and staging lots of new equipment
* JimD pursuing the transport of a working powertool drag-race installation he was en route to NC.

= Announcements =
* Member Storage can resume, shelves have been tagged and records audited. Items remaining on non-member shelves shall be handled by contacting owners and pursuing a reasonable amount of time and effort to responsibly remove.
** If you may want to transfer to a new or soonly available shelf, please meet with myself and Tim to update our records and claim a new place for your stuff!

*'''Bed-Race Kickoff - THURSDAYS - assemble a build and running team. Enter a design phase, begin construction! April 10th soft deadline!! Race Day is Monday April 27th!!!!'''
** 4 Weeks remain till race day.

* JoeT has been awarded February's makership for developing a one-handed controller for limited mobility users. A week remains to apply for March's round.

= The Tim VanSant Makership: LVL1's Makership Program =

* This program is funded completely through donations and NOT through our membership dues.
* We currently have enough funds to offer a Makership. If you are not a member and want to do a makership:
** Apply at https://lvl1.org/makership/ and apply via '''makership@lvl1.org'''
** Application deadline is the last day of each month @ 11:59 PM.
** Become a regular member of LVL1.
** Get 3 months of membership and up to $100 of project cost reimbursements!
* If you '''are''' a member, you can set up a monthly donation to the makership fund! See the treasurer to set this up.
* Members: please talk up the Makership to potential new members.
* If your application is not approved, PLEASE revise and resubmit next month.
* Send any questions about how to submit a successful application to https://lvl1.org/makership/. We want to award a Makership!

= Broken/Equipment Report =

* Learn as much as you can, ask questions and find out the best practices to keep our available equipment in service.
* If something is broken or needs to be replaced, please send an email to '''broken@lvl1.org'''.
* Please supply as much information as possible; links to websites or items are GREATLY appreciated. Consumables can be time-consuming to find; broken is not a mind reader!

'''Currently Broken'''
* Bathroom door lock timer appears stuck - make sure it is spun back to locked position when returning

Recent Fixes
* Front door lock mechanism is failing, replacement parts arrived and installed - thanks Lockadoc!
* A stink has lingered in the bathrooms, and the landlord has been in contact with a plumber to react to additional complaints.
* Possum Clock went down and back up

=Quests =
*'''Save the Planet and fix the Vending area ''' - Recycle your cans! Money from the recycling is going toward a new vending machine - fund is well filled,
** New machine that has or can have RFID added - determine a way to make a member payment thru RFID badge
* Tidy up our appearances and improve our code compliance, DIY with excellence.
* Develop
* Bolstering of our woodworking capability - planer and jointer combo? service & care? discussion on Discord.
* Member storage area improvements
** 2 New Stations shaping up in the back - Metal Casting, SoundLab

= Prospective Members =
* Benefits of joining: A key, a shelf, a vote, and can sponsor (events and new members)
* How to Join: Get to know us! We're not a community of strangers. Find three sponsors, complete form, initiate payment, attend Brunchventure™(2nd Saturday of each month hosted by membership officers).
* Why Join: Monetarily support the space, build the hacker community of Louisville.
* How to get sponsors: Connect with folks. Be seen cleaning. Become apart of the community.

= First Time Visitor Info =
[[File:Adobe-express-qr-code.jpeg|thumb]]
'''Are there any 1st time Visitors?'''

* Prime Directive: '''Be Excellent to Each other'''
* Being unsafe is being unexcellent!
** Please sign the waiver! We have dangerous tools that can cause '''serious injury''' if not used correctly and carefully. We're not responsible if you hurt yourself with them!
** Minors must be supervised at all times.
** Animals also must be supervised at all times.

** Meeting Minutes, equipment information, and projects on our wiki: https://wiki.lvl1.org
** Sign up for our Google Group discussion list https://groups.google.com/forum/#!forum/lvl1
** Google Hangout https://hangouts.google.com/group/KrvEvKVKapRzznlh2
** Discord https://discord.gg/aAxgSCQQWA

** Facebook, Twitter, Meetup, Youtube
** '''learn@lvl1.org''' - Want to learn something new, get some equipment training, or host a workshop? Want to help facilitate any of these things?
** '''broken@lvl1.org''' - Something broken? Does something need to be restocked?
** '''directors@lvl1.org''' - Need to contact those who are ostensibly "in charge"?
* Someone will be hosting a tour at the end of the meeting, near the front doors.

= Regular Weekly Meetups =

'''You too can organize a weekly/monthly meetup! Talk to a member or director and we can get you set up!'''

'''Monday'''
* Sound Builders 6:00 P.M. - 9:00 P.M.

'''Tuesday'''
* LVL1 Open Meeting, 8:00 P.M. - where you are right now!

'''Wednesday'''
* Open for the taking!

'''Thursday'''
* Open Code Night at 8:00 P.M. - ??? If you want to code or interested in coding, this is your night.
* Bed Team 5:00 P.M.- 7:00 P.M.

'''Friday'''
* Irregular Movie and Open Build Night, 8ish? - This is happening in the space. C'mon in and be safe. The best night to be in the space to meet folks and learn something.
** Last Friday:

Check the discord!

'''Saturday'''

'''Sunday'''

= Upcoming Events =

Friday 7-10p LVL1 Classroom, AFOL Adult Friends of Lego (Tiff) 1st Fridays of the month hosting Bricks&MiniFigs

Wednesday 5p 4/1 Vibe Coding with KYX @ The Pointe

Board meeting - 3rd Tuesday Before the Meeting

New Member Brunch Venture - 2nd Saturday of the Month

Deadly Threads and Fatal Fabrics 1st Saturday of the Month 10:00 A.M. - 4:00 P.M.

Prospective Events - (K3 reaching out to find out about getting a group of us in the door):
FleaOff Markets - attend with a group, sign up to share a booth to vend, have fun this summer!
Calliope - Local Screen printing studio - tour for a group from LVL1

'''You too can organize an event! See the Hosting Guide on our website: https://lvl1.org/hosting-guide/'''

= WATCHA MAKING? =

'''Making something cool?'''

'''Need help or materials for a project?'''

'''Have materials looking for a project?'''

'''Tell us about it!'''

Main Page

Costelkj — Tue, 14 Apr 2026 22:06:38 GMT

Recent Meeting Minutes

← Older revision		Revision as of 18:06, 14 April 2026
(2 intermediate revisions by the same user not shown)
Line 113:		Line 113:

	=== Recent Meeting Minutes ===		=== Recent Meeting Minutes ===
	* [[04/05/2026]]		* [[04/14/2026]]
			* [[04/07/2026]]
	* [[03/31/2026]]		* [[03/31/2026]]
	* [[03/23/2026]]		* [[03/23/2026]]

04/05/2026

Costelkj — Tue, 14 Apr 2026 22:02:54 GMT

← Older revision		Revision as of 18:02, 14 April 2026
Line 94:		Line 94:

	'''Monday'''		'''Monday'''
	* Sound Builders 6:00 P.M. - 9:~~000~~ P.M.		* Sound Builders 6:00 P.M. - 9:00 P.M.

	'''Tuesday'''		'''Tuesday'''